SIST EN 13310:2015/oprA1:2017
(Amendment)Kitchen sinks - Functional requirements and test methods
Kitchen sinks - Functional requirements and test methods
This European Standard specifies the functional requirements of and test methods for kitchen sinks for domestic purposes, which ensure that the product, when installed in accordance with the manufacturers’ instructions, gives satisfactory performance.
NOTE 1 For the purposes of this standard, the term “domestic purposes” includes use in hotels, accommodation for students, hospitals and similar buildings.
This document does not specify aesthetic requirements and the overall dimensions of kitchen sinks.
It does not apply to industrial kitchen sinks.
NOTE 2 All drawings are examples only; other forms are permissible.
Küchenspülen - Funktionsanforderungen und Prüfverfahren
Eviers de cuisine - Prescriptions fonctionnelles et méthodes d'essai
Kuhinjska korita - Funkcionalne zahteve in preskusne metode - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13310:2015/oprA1:2017
01-november-2017
Kuhinjska korita - Funkcionalne zahteve in preskusne metode - Dopolnilo A1
Kitchen sinks - Functional requirements and test methods
Küchenspülen - Funktionsanforderungen und Prüfverfahren
Eviers de cuisine - Prescriptions fonctionnelles et méthodes d'essai
Ta slovenski standard je istoveten z: EN 13310:2015/prA1:2017
ICS:
97.040.10 Kuhinjsko pohištvo Kitchen furniture
SIST EN 13310:2015/oprA1:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13310:2015/oprA1:2017
---------------------- Page: 2 ----------------------
SIST EN 13310:2015/oprA1:2017
DRAFT
EUROPEAN STANDARD
EN 13310:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2017
ICS 97.040.10
English Version
Kitchen sinks - Functional requirements and test methods
Eviers de cuisine - Prescriptions fonctionnelles et Küchenspülen - Funktionsanforderungen und
méthodes d'essai Prüfverfahren
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.
This draft amendment A1, if approved, will modify the European Standard EN 13310:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13310:2015/prA1:2017:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13310:2015/oprA1:2017
EN 13310:2015/prA1:2017 (E)
Contents Page
European foreword . 3
1 Modification to 5.6.3, Procedure . 4
2 Modification to 5.7.3, Test specimens . 4
3 Modification to Clause 7, Marking . 4
4 Modification to 8.2.2, Test samples, testing and compliance criteria . 4
5 Modification to Annex ZA, clauses of this European Standard addressing the
provisions of the EU Construction Products Regulation . 5
2
---------------------- Page: 4 ----------------------
SIST EN 13310:2015/oprA1:2017
EN 13310:2015/prA1:2017 (E)
European foreword
This document (EN 13310:2015/prA1:2017) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential characteristics of the EU Construction
Products Regulation.
For relationship with EU Construction Products Regulation, see informative Annex ZA, which is an
integral part of this document.
This document contains the Annex ZA in the format of TF N 687 rev 1 of 2015-06-02 and editorial
modifications as agreed between representatives of EU/DG Growth, CEN/TC 163 and FECS on
2016-07-07 in Brussels for citation as standard in OJEU as main changes in relation to its previous
version.
3
---------------------- Page: 5 -----------------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.