SIST EN 12390-6:2024
(Main)Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
This document specifies the method for the determination of the tensile splitting strength of test specimens of hardened concrete. The reference specimens are moulded cylindrical specimens.
Cores of at least 75 mm diameter complying with the requirements of EN 12504 1 can be tested using this method.
The use of cubic or prismatic specimens is included in Annex A.
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern
Dieses Dokument legt das Verfahren zur Bestimmung der Spaltzugfestigkeit von Probekörpern aus Festbeton fest. Die Bezugsprobekörper sind gegossene zylindrische Probekörper.
Mit diesem Verfahren können Bohrkerne mit einem Mindestdurchmesser von 75 mm, die den Anforderungen von EN 12504 1 entsprechen, geprüft werden.
Die Verwendung würfelförmiger oder prismatischer Probekörper ist in Anhang A enthalten.
Essai pour béton durci - Partie 6 : Détermination de la résistance en traction par fendage d’éprouvettes
Le présent document spécifie la méthode de détermination de la résistance en traction par fendage d’éprouvettes de béton durci. Les éprouvettes de référence sont des éprouvettes cylindriques moulées.
Des carottes d’au moins 75 mm de diamètre conformes aux exigences de l’EN 12504 1 peuvent être soumises à l’essai à l’aide de la présente méthode.
L'utilisation d’éprouvettes cubiques ou prismatiques est présentée à l’Annexe A.
Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancev
Ta dokument določa metodo za ugotavljanje natezne razcepne trdnosti preskušancev iz strjenega betona. Referenčni vzorci so uliti valjasti vzorci.
S to metodo je mogoče preskusiti jedra s premerom vsaj 75 mm, ki ustrezajo zahtevam iz standarda EN 12504-1.
Uporaba kockastih in prizmatičnih vzorcev je zajeta v dodatku A.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 12390-6:2024
01-januar-2024
Nadomešča:
SIST EN 12390-6:2010
Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancev
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern
Essai pour béton durci - Partie 6 : Détermination de la résistance en traction par fendage
d’éprouvettes
Ta slovenski standard je istoveten z: EN 12390-6:2023
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 12390-6:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 12390-6:2024
---------------------- Page: 2 ----------------------
SIST EN 12390-6:2024
EN 12390-6
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2023
EUROPÄISCHE NORM
ICS 91.100.30 Supersedes EN 12390-6:2009
English Version
Testing hardened concrete - Part 6: Tensile splitting
strength of test specimens
Essai pour béton durci - Partie 6 : Détermination de la Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von
résistance en traction par fendage d'éprouvettes Probekörpern
This European Standard was approved by CEN on 22 October 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12390-6:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 12390-6:2024
EN 12390-6:2023 (E)
Contents Page
European foreword . 4
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Principle . 7
5 Apparatus . 7
5.1 Testing machine . 7
5.2 Jig (optional) . 8
5.3 Packing strips . 8
6 Test specimens . 9
6.1 General . 9
6.2 Adjustment of test specimens . 9
6.3 Marking .
...
SLOVENSKI STANDARD
kSIST FprEN 12390-6:2023
01-september-2023
Preskušanje strjenega betona - 6. del: Natezna razcepna trdnost preskušancev
Testing hardened concrete - Part 6: Tensile splitting strength of test specimens
Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von Probekörpern
Essai pour béton durci - Partie 6 : Détermination de la résistance en traction par fendage
d’éprouvettes
Ta slovenski standard je istoveten z: FprEN 12390-6
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
kSIST FprEN 12390-6:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
kSIST FprEN 12390-6:2023
---------------------- Page: 2 ----------------------
kSIST FprEN 12390-6:2023
FINAL DRAFT
EUROPEAN STANDARD
FprEN 12390-6
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2023
ICS 91.100.30 Will supersede EN 12390-6:2009
English Version
Testing hardened concrete - Part 6: Tensile splitting
strength of test specimens
Essai pour béton durci - Partie 6 : Détermination de la Prüfung von Festbeton - Teil 6: Spaltzugfestigkeit von
résistance en traction par fendage d'éprouvettes Probekörpern
This draft European Standard is submitted to CEN members for formal vote. It has been drawn up by the Technical Committee
CEN/TC 104.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. FprEN 12390-6:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
kSIST FprEN 12390-6:2023
FprEN 12390-6:2023 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 5
5.1 Testing machine . 5
5.2 Jig (optional) . 6
5.3 Packing strips . 6
6 Test specimens . 7
6.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.