SIST EN 12046-1:2004
(Main)Operating forces - Test method - Part 1: Windows
Operating forces - Test method - Part 1: Windows
This European Standard specifies the test method for determining the force required when engaging or releasing the hardware of a window and when commencing the movement of a casement or sash, in both opening and closing directions.
It is applicable to manually operated windows.
This European Standard is applicable to products of any materials.
Bedienungskräfte - Prüfverfahren - Teil 1: Fenster
Diese Europäische Norm legt das Prüfverfahren zur Ermittlung der Kraft fest, die für das Einrasten und Freigeben von Fensterbeschlägen und zur Einleitung der Bewegung eines Flügelrahmens oder Schiebe-flügels sowohl in Öffnungs- als auch in Schließrichtung erforderlich ist. Diese Norm ist auf handbetätigte Fenster anwendbar. Diese Europäische Norm ist auf Produkte aller Werkstoffe anwendbar.
Forces de manoeuvre - Méthode d'essai - Partie 1: Fenetres
La présente Norme européenne définit la méthode de détermination de la force nécessaire a l'engagement et au relâchement de la quincaillerie d'une fenetre lorsque l'on amorce le mouvement des vantaux tant dans le sens de l'ouverture que de la fermeture.
Elle s'applique aux fenetres mues manuellement.
La présente Norme européenne s'applique aux produits quel que soit le matériau constitutif.
Sile pri uporabi - Preskusna metoda - 1. del: Okna
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Sile pri uporabi - Preskusna metoda - 1. del: OknaBedienungskräfte - Prüfverfahren - Teil 1: FensterForces de manoeuvre - Méthode d'essai - Partie 1: FenetresOperating forces - Test method - Part 1: Windows91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 12046-1:2003SIST EN 12046-1:2004en01-september-2004SIST EN 12046-1:2004SLOVENSKI
STANDARD
SIST EN 12046-1:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12046-1November 2003ICS 91.060.50; 91.190English versionOperating forces - Test method - Part 1: WindowsForces de manoeuvre - Méthode d'essai - Partie 1:FenêtresBedienungskräfte - Prüfverfahren - Teil 1: FensterThis European Standard was approved by CEN on 1 September 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12046-1:2003 ESIST EN 12046-1:2004
EN 12046-1:2003 (E)2ContentsPageForeword.31Scope.42Normative references.43Terms and definitions.44Principle of test.45Apparatus.55.1Test rig.55.2Linear motion.85.3Rotary motion.86Test specimen.87Conditioning and preparation of the test specimen.97.1Conditioning.97.2Preparation.98Procedure.98.1Test sequence.98.2Rate of loading.108.3Disengagement of hardware.108.4Measurement of the force to start motion of the casement or sash.108.5Full engagement of closing and locking hardware.109Expression of results.1010Test report.10SIST EN 12046-1:2004
EN 12046-1:2003 (E)3ForewordThis document (EN 12046-1:2003) has been prepared by Technical Committee CEN/TC 33 “Doors, windows,shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2004, and conflicting national standards shall be withdrawn at the latest byMay 2004.This European Standard is one of a series of standards for windows.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 12046-1:2004
EN 12046-1:2003 (E)41 ScopeThis European Standard specifies the test method for determining the force required when engaging or releasing thehardware of a window and when commencing the movement of a casement or sash, in both opening and closingdirections.It is applicable to manually operated windows.This European Standard is applicable to products of any materials.2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).prEN 12519:2003, Windows and pedestrian doors
— Terminology
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.