SIST EN 60317-13:2010/oprA2:2026

• Status: Not Published
• Public Enquiry End Date: 26-Nov-2026
• ICS: 29.060.10 - Wires
• ICS: 77.150.30 - Copper products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 08-Sep-2026
• Due Date: 26-Jan-2027
• Ref Project: EN 60317-13:2010/prA2:2026 - Amendment 2 - Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200

• Amends: SIST EN 60317-13:2010 - Specifications for particular types of winding wires - Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 (IEC 60317-13:2010)
• Effective Date: 01-Nov-2026

Overview

SIST EN 60317-13:2010/oprA2:2026 is Amendment 2 to the international standard that specifies requirements for particular types of winding wires. This part of the standard focuses on polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200. Published by SIST (the Slovenian Institute for Standardization), this amendment aligns with EN 60317-13 and the IEC standards for winding wires, ensuring consistency across international applications in electrical and electronic engineering.

This amendment refines testing requirements and harmonizes technical conditions for the manufacturing and use of class 200 enamelled round copper wire. Such wires are critical components in various electrical equipment where high thermal, mechanical, and chemical performance is essential.

Key Topics

• Winding wire types covered:
  • Polyester or polyesterimide insulated
  • Overcoated with polyamide-imide enamel
  • Round, solid copper, class 200
• International harmonization:
  • Follows IEC and EN standardization processes
  • Parallel voting with CENELEC to ensure pan-European acceptance
• Amendment focus:
  • Updates specific technical sections (e.g., clauses on testing, such as “Resistance to transformer oil”)
  • Clarifies and refines test methods and applicability
• Technical committee:
  • Prepared by IEC Technical Committee 55 (Winding Wires), ensuring expert input

Applications

Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, is widely used for:

• Transformers: As winding wire in power and distribution transformers requiring high temperature stability and electrical insulation.
• Motors and generators: In both small and large motors, where robust insulation is vital for long-term performance and reliability in demanding thermal environments.
• Electromagnetic devices: Solenoids, relays, and actuators that demand durable insulating layers and high-quality copper conductors for efficiency.
• Electrical and electronic equipment: Any application involving coils that need to withstand chemicals, high temperatures (up to class 200), and mechanical stress.

The standard supports manufacturers and users by providing reliable specification frameworks, which help to ensure compatibility, safety, and performance of winding wires in critical electrical applications.

Related Standards

• IEC 60317-13:2010: The main reference for specifications concerning polyester or polyesterimide overcoated winding wires.
• EN 60317 series: European standards harmonized with IEC for various winding wire characteristics and types.
• ISO/IEC Directives, Part 1 and 2: Governing document drafting and development across international standards.
• SIST EN 60317 series: Slovenian adoption of EN 60317 standards for wires.
• Other IEC 60317 parts: Cover different types and classes of winding wires, insulation materials, and test methods.

---

Keywords

winding wires, polyesterimide enamelled copper wire, polyamide-imide insulation, class 200 wire, transformer winding wire, motor wire, electrical insulation, IEC 60317, EN 60317, SIST standard, copper wire standards, electrical engineering standards

---

SIST EN 60317-13:2010/oprA2:2026 provides an updated, authoritative framework for the specification and testing of advanced winding wires, supporting reliability, safety, and international compatibility in electrical applications.

SLOVENSKI STANDARD
01-november-2026
Specifikacije za posebne tipe navitij - 13. del: S poliestrom ali poliesterimidom
emajliran bakren okrogel vodnik, prekrit s poliamidimidom, razred 200 - Dopolnilo
A2
Amendment 2 - Specifications for particular types of winding wires - Part 13: Polyester or
polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 13:
Runddrähte aus Kupfer, lackisoliert mit Polyester oder Polyesterimid und darüber mit
Polyamidimid, Klasse 200
Spécifications pour types particuliers de fils de bobinage - Partie 13: Fil de section
circulaire en cuivre émaillé avec polyester ou polyesterimide et avec surcouche
polyamide-imide, classe 200
Ta slovenski standard je istoveten z: EN 60317-13:2010/prA2:2026
ICS:
29.060.10 Žice Wires
77.150.30 Bakreni izdelki Copper products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

55/2104/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60317-13/AMD2 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2026-09-04 2026-11-27
SUPERSEDES DOCUMENTS:
55/2100/RR
IEC TC 55 : WINDING WIRES
SECRETARIAT: SECRETARY:
United States of America Mr Mike Leibowitz
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
TC 2
ASPECTS CONCERNED:
Electricity transmission and distribution,Safety
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).

TITLE:
Amendment 2 - Specifications for particular types of winding wires - Part 13: Polyester or
polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200

PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

IEC CDV 60317-13/AMD2 © IEC 2026
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 Specifications for particular types of winding wires -
5 Part 13: Polyester or polyesterimide overcoated with polyamide-imide
6 enamelled round copper wire, class 200
8 AMENDMENT 2
10 FOREWORD
11 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
12 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
13 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
14 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
15 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
16 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
...