SIST EN 16027:2012
(Main)Protective clothing - Gloves with protective effect for association football goal keepers
Protective clothing - Gloves with protective effect for association football goal keepers
This European Standard applies to gloves for goal keepers for association football (in the following text just “gloves for goal keepers") with stabilizing and/or stiffening elements (e.g. splint, brace), which due to their construction, provide a protective effect against injuries of the hand or parts of it, such as torn capsules, broken fingers, sprained fingers and wrists.
Schutzkleidung - Handschuhe mit Schutzwirkung für Fußballtorwarte
Dieses Dokument gilt für Handschuhe für Fußballtorwarte (im folgenden Text als "Handschuhe für Torwarte" bezeichnet), die aufgrund ihrer Konfektionierung eine Schutzwirkung gegen Verletzungen der Hand oder Teilen davon bieten.
Vêtements de protection - Gants à effet protecteur pour gardiens de but de football
La présente Norme européenne s’applique aux gants pour gardiens de but de football (dans le texte suivant il
est seulement fait référence à des « gants pour gardiens de but ») intégrant des éléments de stabilisation
et/ou de renfort (par exemple attelles, appuis) qui, en raison de leur conception, fournissent un effet protecteur
contre les blessures de la main ou de parties de celle-ci, comme par exemple des arrachements de la capsule
articulaire, des fractures des doigts, des entorses des doigts et des poignets.
Varovalna obleka - Rokavice z zaščitnim učinkom za nogometne vratarje nogometnih zvez
Ta evropski standard se uporablja za rokavice za nogometne vratarje (v nadaljnjem besedilu: rokavice za vratarje) s stabilizacijskimi in/ali utrditvenimi deli (npr. opornice), ki zaradi svoje zgradbe nudijo zaščito pred poškodbami roke ali njenih delov, kot so natrgane sklepne ovojnice, zlomi prstov ter zvini prstov in zapestij.
General Information
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DUMHSchutzkleidung - Handschuhe mit Schutzwirkung für FußballtorwarteVêtements de protection - Gants à effet protecteur pour gardiens de but de footballProtective clothing - Gloves with protective effect for association football goal keepers97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipment13.340.40Varovanje dlani in rokHand and arm protectionICS:Ta slovenski standard je istoveten z:EN 16027:2011SIST EN 16027:2012en,fr,de01-februar-2012SIST EN 16027:2012SLOVENSKI
STANDARD
SIST EN 16027:2012
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16027
December 2011 ICS 13.340.40 English Version
Protective clothing - Gloves with protective effect for association football goal keepers
Vêtements de protection - Gants à effet protecteur pour gardiens de but de football
Schutzkleidung - Handschuhe mit Schutzwirkung für Fußballtorwarte This European Standard was approved by CEN on 29 October 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16027:2011: ESIST EN 16027:2012
EN 16027:2011 (E) 2 Contents Page Foreword .3Introduction .41 Scope .52 Normative references .53 Terms and definitions .54 Requirements .54.1 General .54.2 Innocuousness .54.3 Ergonomics .64.4 Stiffness .64.5 Restraint system .64.6 Impact strength .64.7 Sizing .65 Test methods .65.1 General .65.2 Sampling and conditioning .75.3 Ergonomics .75.4 Stiffness .75.4.1 Apparatus .75.4.2 Procedure . 105.5 Restraint . 115.6 Impact strength . 125.6.1 Apparatus . 125.6.2 Procedure . 136 Marking . 147 Information supplied by the manufacturer . 14Annex A (informative)
Environmental Aspects . 16Annex ZA (informative)
Relationship between this European
Standard and the Essential Requirements of EU Directive 89/686/EEC . 17Bibliography . 18 SIST EN 16027:2012
EN 16027:2011 (E) 3 Foreword This document (EN 16027:2011) has been prepared by Technical Committee CEN/TC 162 “Protective clothing including hand and arm protection and lifejackets”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at the latest by June 2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 16027:2012
EN 16027:2011 (E) 4 Introduction Whilst many types of gloves for goal keepers are only designed to facilitate catching the ball and provide cushioning from minor contusions, gloves can also be designed to provide additional protection to the hands and particularly the fingers. These are intended to reduce the risk of fractures, by restricting the flexing under impact of joints beyond their natural range of movement. SIST EN 16027:2012
EN 16027:2011 (E) 5 1 Scope This European Standard applies to gloves for goal keepers for association football (in the following text just “gloves for goal keepers") with stabilizing and/or stiffening elements (e.g. splint, brace), which due to their construction, provide a protective effect against injuries of the hand or parts of it, such as torn capsules, broken fingers, sprained fingers and wrists. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 420:2003+A1:2009, Protective gloves
General requirements and test methods EN 10270-1 Steel wire for mechanical springs — Part 1: Patented cold drawn unalloyed steel wire
EN 13906-2, Cylindrical helical springs made from round wire and bar — Calculation and design — Part 2: Extension springs
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 glove for goal keepers
protective equipment worn on the hand which restricts movement of the fingers further than the normal range of the joints by use of additional safety features such as (but not restricted to) splints, braces or other stiffening elements 3.2 association football game of football in which the ball is not picked up or carried by field players, and in which the rules for tackling should limit the severity of body blows [EN 13061:2009, 2.4] 4 Requirements 4.1 General Gloves for goal keepers shall be safe and suitable for their purpose when used in accordance with the manufacturers instructions. They shall be free of hard or sharp edges or corners, buckles or other objects on the inside and the surface of the product which may be dangerous for the user or others during normal or foreseeable use when tested in accordance with 5.3. 4.2 Innocuousness Manufacturers of products complying with this standard should consider the health and protection of the user, the environment and the supply chain. Materials used should not, during foreseeable conditions of normal use, release or degrade to release substances generally known to be hazardous. SIST EN 16027:2012
EN 16027:2011 (E) 6 The manufacturer should list in the information supplied by the manufacturer the substances used for the main components of the product.
NOTE Information on the identification and classification of such substances can be found in the Directive 67/548/EEC (classification, packaging and labelling of dangerous substances) [1] as well as in the Regulation (EC) no.1907/2006 of the European Parliament and of the Council of 18 December 2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH)[2]. 4.3 Ergonomics Gloves for goalkeepers shall be designed in such a way that the user can perform the typical movements required by the foreseeable conditions of use without restrictions, closure systems which ensure correct fitting and placement of the glove shall be adjustable and suitable to ensure restraint of the item whilst in use without constriction of the joint between the hand and arm.
Testing shall be in accordance with 5.3. 4.4 Stiffness Gloves for goalkeepers shall be designed and manufactured with suitable stabilising and stiffening elements such that they support the fingers when they are stressed by a load or impact inverse to the natural flex direction of the fingers without endangering the hand, wrist or arm of the user. Testing shall be in accordance with 5.4, and the force measured shall be within the limits specified in Table 1. 4.5 Restraint system Gloves for goalkeepers shall be easily fitted and adjusted by the user using a suitable restraint system. They shall fit firmly to the hand of the intended size, shall not release from the hand during use, and shall remain in the location they are designed to protect during all typical movements or impact. When tested in accordance with 5.5, the maximum displacement shall be less than 20 mm. 4.6 Impact strength Gloves for goal keepers with stabilizing and stiffening elements (e.g. splint, brace) shall be resistant against mechanical impacts. Stabilizing and stiffening elements shall not break or splinter, when tested according to 5.6.
4.7 Sizing
Gloves shall be available in a range of sizes suitable for the varying hand size of the intended user. The manufacturer shall indicate the intended size for which the glove is designed.
The size of the glove with protective effect shall be defined according to EN 420:2003+A1:2009, 5.1.2, Table 3. 5 Test methods 5.1 General Where no specific testing procedure is given, compliance with the requirements of this standard shall be established by measurement, visual and physical examination. For testing, new unused samples shall be used. Measuring instruments unless otherwise specified shall be accurate to ± 2 % of the pass/fail level of the characteristics being measured. SIST EN 16027:2012
EN 16027:2011 (E) 7 For each of the required sequences of measurement performed in accordance with this standard a corresponding estimate of the uncertainty of the final result shall be determined. The uncertainty of measurement shall be expressed in the form ± X. It shall be used in determining whether a “PASS” performance has been achieved. If the final result minus X is below the pass level and there is the requirement that a certain value shall be exceeded then the sample shall be deemed to have failed. NOTE It is anticipated that values of uncertainty of measurement will usually be between 2 % and 5 % of the measured value for force and length measurements. 5.2 Sampling and conditioning Two pairs of unused gloves for goal keepers of each size distributed to the market shall be provided for testing.
The samples shall be conditioned for at least 24 h in an atmosphere of (20 ± 2) °C and a humidity of (65 ± 5) %. Testing shall be carried out in the conditioning environment or within 10 min of removal from that environmen
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.