SIST EN IEC 60335-2-89:2022/A11:2022
(Amendment)Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances with an incorporated or remote refrigerant condensing unit or compressor
This European Standard deals with the safety requirements for electrically operated commercial refrigerating appliances and ice-makers that have an incorporated motor-compressor or that are supplied in two units for assembly as a single appliance in accordance with the instructions (split system).
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-89: Besondere Anforderungen für gewerbliche Kühl-/Gefriergeräte mit eingebautem oder getrenntem Verflüssigersatz oder Motorverdichter
Appareils électrodomestiques et analogues - Sécurité - Partie 2-89: Règles particulières pour les appareils de réfrigération à usage commercial avec une unité de condensation du fluide frigorigène ou un compresseur incorporés ou à distance
Gospodinjski in podobni električni aparati - Varnost - 2-89. del: Posebne zahteve za komercialne hladilne naprave z vgrajeno ali zunanjo hladilno kondenzatorsko enoto ali kompresorjem - Dopolnilo A11
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60335-2-89:2022/A11:2022
01-november-2022
Gospodinjski in podobni električni aparati - Varnost - 2-89. del: Posebne zahteve
za komercialne hladilne naprave z vgrajeno ali zunanjo hladilno kondenzatorsko
enoto ali kompresorjem - Dopolnilo A11
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements
for commercial refrigerating appliances with an incorporated or remote refrigerant
condensing unit or compressor
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-89:
Besondere Anforderungen für gewerbliche Kühl-/Gefriergeräte mit eingebautem oder
getrenntem Verflüssigersatz oder Motorverdichter
Appareils électrodomestiques et analogues - Sécurité - Partie 2-89: Règles particulières
pour les appareils de réfrigération à usage commercial avec une unité de condensation
du fluide frigorigène ou un compresseur incorporés ou à distance
Ta slovenski standard je istoveten z: EN IEC 60335-2-89:2022/A11:2022
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
SIST EN IEC 60335-2-89:2022/A11:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EUROPEAN STANDARD EN IEC 60335-2-89:2022/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM August 2022
ICS 97.130.20
English Version
Household and similar electrical appliances - Safety - Part 2-89:
Particular requirements for commercial refrigerating appliances
and ice-makers with an incorporated or remote refrigerant unit or
motor-compressor
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-89: Exigences particulières pour les appareils de ähnliche Zwecke - Teil 2-89: Besondere Anforderungen für
réfrigération et fabriques de glace à usage commercial avec gewerbliche Kühl-/Gefriergeräte mit eingebautem oder
une unité de fluide frigorigène ou un motocompresseur getrenntem Verflüssigersatz oder Motorverdichter
incorporés ou à distance
This amendment A11 modifies the European Standard EN IEC 60335-2-89:2022; it was approved by CENELEC on 2022-05-04. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60335-2-89:2022/A11:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/A11:2022 (E)
European foreword
This document (EN IEC 60335-2-89:2022/A11:2022) has been prepared by CLC/TC 61 “Safety of
household and similar electrical appliances”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2023-05-04
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2025-05-04
conflicting with this document have to be
withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60335-2-89:2022.
The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are
additional to those in the IEC standard are prefixed with the letter “Z”.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with the EU Directive(s) / Regulation(s), see informative Annex ZZB, which is an
integral part of this document.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/A11:2022 (E)
1 Modification to the Introduction
Addition:
Products within the scope of this document can incorporate pressurized components for which the
Pressure Equipment Directive, 2014/68/EU, applies:
Refrigerating systems having a pressure greater than 0,05 MPa are considered to be assemblies
falling within the scope of the Pressure Equipment Directive, 2014/68/EU. However, according to
Article 1, item 2 (f) of the Directive, equipment classified no higher than category I under Article 13 of
the PED and covered by the Low Voltage Directive or Machinery Directive are excluded from its
scope.
Compliance with this document does not give a means of conformity with the essential requirements
of the Pressure Equipment Directive for those appliances that fall within its scope.
This amendment supplements or modifies the corresponding clauses of the standards below:
— EN 60335-1:2012+A11:2014+ A13:2017+A1:2019+A14:2019+A2:2019 (Part 1)
— EN IEC 60335-2-89:2022 (Part 2)
2 Modification to Clause 1, “Scope”
Add the following NOTE after NOTE 101:
“NOTE Z101 Commercial use of these refrigerating appliances is for example their use in restaurants,
canteens, hospitals and commercial enterprises such as bakeries, butcheries, supermarkets etc.”
Add the following paragraph before NOTE 102:
“In many countries additional requirements on the safe use of the equipment covered may be
specified by the national health authorities, the national authorities responsible for the protection of
labour, the national water supply authorities and similar authorities.”
NOTE 102:
Delete the second dashed item:
Add the following dashed item:
“
— for scrapping of appliances, additional requirements can be necessary.”
Add the following new paragraph:
“Products covered by this document do not create a noise hazard; therefore no specific provisions
concerning noise are given.”
3 Modification to Clause 2, “Normative references”
Add the following standards:
EN 614-1:2006+A1:2009, Safety of machinery - Ergonomic design principles - Part 1: Terminology
and general principles
EN 614-2:2000+A1:2008, Safety of machinery - Ergonomic design principles - Part 2: Interactions
between the design of machinery and work tasks
EN ISO 14159:2008, Safety of machinery - Hygiene requirements for the design of machinery (ISO
14159:2002)
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/A11:2022 (E)
4 Modification to Clause 3, “Terms and Definitions”
Add the following definitions:
“
3.Z101 guard
part of the appliance specifically designed to provide protection by means of a physical barrier
3.Z102 operator
person installing, operating, adjusting, maintaining, cleaning or moving the appliance
3.Z103 commercial use
intended use of appliances covered by this document in a professional way
Note 1 to entry: For the purpose of this document commercial use may be read as not intended for domestic
use.”
5 Modification to Clause 4, “General requirement”
Replace the first paragraph of Part 1 by the following:
Appliances shall be constructed so that they function safely so as to cause no danger to persons or
surroundings during normal use, even in the event of carelessness, and during installation, adjusting,
maintenance, cleaning, repairing or transportation.
6 Modification to Clause 7, “Marking and instructions”
7.1 Replace the fourth and fifth dashed items in Part 1 by:
— business name and full address of the manufacturer and, where applicable, his authorized
representative;
— model or type reference, serial number, if any, and production year;
NOTE Z101 Production year is the year when the production process is completed. The production year can be
a part of the serial number.
Add a new dashed item:
— designation of the appliance.
NOTE Z102 The designation may be a combination of letters and/or numbers and shall enable to identify the
machine as specified in the instructions.
7.12 Add the following to the addition:
The instructions shall contain the following:
— business name and full address of the manufacturer and, where applicable, his authorized
representative;
— model or type reference of the appliance as marked on the appliance itself, except for the serial
number;
— designation of the appliance together with its explanation in case it is given by a combination of
letters and/or numbers;
— a general description of the appliance, when needed due to the complexity of the appliance;
4
---------------------- Page: 6 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/A11:2022 (E)
— specific precautions if required during installation, operation, adjusting, user maintenance,
cleaning, repairing or moving;
— when needed drawings, diagrams, descriptions and explanations necessary for the safe use and
user maintenance of the appliance;
— the possible reasonably foreseeable misuse and, whenever relevant, a warning against the
effects it may have on the safe use of the appliance;
The words “Original instructions” shall appear on the language version(s) verified by the manufacturer
or by the authorized representative.
When a translation of the original instructions has been provided by a person introducing the
appliance on the market; the meaning of the sentence “Translation of the original instructions” has to
appear in the relevant instructions delivered with the appliance.
The instructions for maintenance/service to be done by specialized personnel, mandated by the
manufacturer or the authorized representative may be supplied in only one Community language
which the specialized personnel understand.
The instructions shall indicate the type and frequency of inspections and maintenance required for
safe operation including the preventive maintenance measures.
Add the new following subclauses:
7.12.1.Z101 Information shall be given:
— on use, transportation, assembly, dismantling when out of service, testing or foreseeable
breakdowns, if these operations have consequences on stability of the appliance in order to avoid
overturning, falling or uncontrolled movements of the appliance or of its component parts;
— on how to maintain adequate mechanical stability when in use, during transportation, assembly,
dismantling, scrapping and any other action involving the appliance;
— on the protective measures to be taken by the user, including, where appropriate, the personal
protective equipment to be provided;
— on the operating method to be followed in the event of accident or breakdown; if a blockage is
likely to occur the operating method to safely unblock the appliance;
— on the specifications on the spare parts to be used, when these affect the health and safety of the
operator;
— that the A-weighted emission sound pressure level is below 70 dB(A);
7.12.1.Z102 Instructions shall be given, when necessary, concerning safe handling and transportation
on the packed appliance or shall be delivered together with the package.
7.12.1.Z103 If the installation instructions state that appliance can be placed on top of a other
appliance, they shall state which appliances are suitable. Instructions shall be given for the assembly
of the appliances. The instructions shall state how to obtain any fixing attachments required, unless
they are supplied with the appliance.
7.12.1.Z104 The instructions shall include a warning that the appliance shall be disconnected from its
power source during cleaning or maintenance and when replacing parts. If the removal of the plug is
foreseen, it shall be clearly indicated that the removal of the plug has to be such that an operator can
check from any of the points to which he has access that the plug remains removed.
If this is not possible, due to the construction of the appliance or its installation, a disconnection with a
locking system in the isolated position shall be provided.
5
---------------------- Page: 7 ----------------------
SIST EN IEC 60335-2-89:2022/A11:2022
EN IEC 60335-2-89:2022/A11:2022 (E)
7 Modification to Clause 20, “Stability and mechanical hazards”
20.1. Addition:
Appliances and their components and fittings shall have adequate mechanical stability during
transportation, assembly, dismantling and any other action involving the appliance.
Compliance is checked by verifying the instructions and by the relevant tests, if necessary.
20.2 Add after the second paragraph:
Dangerous moving transmission parts shall be safeguarded either by design or guards. When guards
are used, they shall be fixed guards.
NOTE Z101 Parts of the enclosure can fulfil the guarding function.
8 Modification to Clause 21, “Mechanical strength”
21.1 Add before the “Addition”:
Replace the first paragraph of Part 1 by:
Appliances and their components and fittings shall have adequate mechanical strength and be
constructed to withstand such rough handling that may be expected in normal use, during
transportation, assembly, dismantling, scrapping and any other action involving the appliance.
9 Modification to Clause 22, “Construction”
22.103 Add at the end of the first paragraph the following text:
I
...
SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
01-junij-2020
Gospodinjski in podobni električni aparati - Varnost - 2-89. del: Posebne zahteve
za komercialne hladilne naprave z vgrajeno ali zunanjo hladilno kondenzatorsko
enoto ali kompresorjem - Dopolnilo AA
Household and similar electrical appliances - Safety - Part 2-89: Particular requirements
for commercial refrigerating appliances with an incorporated or remote refrigerant
condensing unit or compressor
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-89:
Besondere Anforderungen für gewerbliche Kühl-/Gefriergeräte mit eingebautem oder
getrenntem Verflüssigersatz oder Motorverdichter
Appareils électrodomestiques et analogues - Sécurité - Partie 2-89: Règles particulières
pour les appareils de réfrigération à usage commercial avec une unité de condensation
du fluide frigorigène ou un compresseur incorporés ou à distance
Ta slovenski standard je istoveten z: prEN IEC 60335-2-89:2020/prAA:2020
ICS:
97.130.20 Hladilne naprave za trgovine Commercial refrigerating
appliances
oSIST prEN IEC 60335-2- en,fr
89:2020/oprAA:2020
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-89:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
May 2020
ICS
English Version
Household and similar electrical appliances - Safety - Part 2-89:
Particular requirements for commercial refrigerating appliances
with an incorporated or remote refrigerant condensing unit or
compressor
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-89: Règles particulières pour les appareils de ähnliche Zwecke - Teil 2-89: Besondere Anforderungen für
réfrigération à usage commercial avec une unité de gewerbliche Kühl-/Gefriergeräte mit eingebautem oder
condensation du fluide frigorigène ou un compresseur getrenntem Verflüssigersatz oder Motorverdichter
incorporés ou à distance
This draft amendment prAA, if approved, will modify the European Standard prEN IEC 60335-2-89:2020; it is submitted to CENELEC
members for enquiry.
Deadline for CENELEC: 2020-07-24.
It has been drawn up by CLC/TC 61.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 70831 Ref. No. prEN IEC 60335-2-89:2020/prAA:2020 E
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
prEN IEC 60335-2-89:2020/prAA:2020 (E)
1 European foreword
2 This document (prEN IEC 60335-2-89:2020/A11:2020) has been prepared by CLC/TC 61 "Safety of
3 household and similar electrical appliances".
4 This document is currently submitted to the CENELEC Enquiry
5 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 6 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be (to be confirmed or
withdrawn modified when voting)
6
7 This document will supersede EN 60335-2-89:2010 and all of its amendments and corrigenda (if any).
8 This amendment supplements or modifies the corresponding clauses of the standards below:
9 – EN 60335-1:2012+A11:2014+ A13:2017+A1:2019+A14:2019+A2:2019 (Part 1)
10 – EN IEC 60335-2-89:2019+Cor1 (Part 2)
11 – Secretary Note: This standard shall be read in conjunction with EN IEC 60335-2-
12 89:2020.(PR=70830)
13 The numbering system for European clauses, subclauses, notes, tables, figures and annexes that are
14 additional to those in the IEC standard are prefixed with the letter “Z”.
15 This document has been prepared under a mandate given to CENELEC by the European Commission
16 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
17 For the relationship with EU Directive(s) see informative Annexes ZZA and ZZB, which are an integral
18 part of this document.
2
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
prEN IEC 60335-2-89:2020/prAA:2020 (E)
19 Text of prAA:2020 of prEN IEC 60335-2-89:2020
20 1 Modification to the Introduction
21 Addition:
22 Products within the scope of this standard may incorporate pressurized components for which the
23 Pressure Equipment Directive, 2014/68/EU, applies:
24 Refrigerating systems having a pressure greater than 0,05 MPa are considered to be assemblies
25 falling within the scope of the Pressure Equipment Directive, 2014/68/EU. However, according to
26 Article 1, item 2 (f) of the Directive, equipment classified no higher than category I under Article 13 of
27 the PED and covered by the Low Voltage Directive or Machinery Directive are excluded from its
28 scope.
29 Compliance with this standard does not give a means of conformity with the essential requirements of
30 the Pressure Equipment Directive for those appliances that fall within its scope.
31
32 2 Modification to the Scope
33
34 Add the following NOTE after NOTE 101:
35 NOTE Z101 Commercial use of these refrigerating appliances is for example their use in restaurants, canteens, hospitals and
36 commercial enterprises such as bakeries, butcheries, supermarkets etc.
37
38 Add the following paragraph before NOTE 102:
39 In many countries additional requirements on the safe use of the equipment covered may be specified by the
40 national health authorities, the national authorities responsible for the protection of labour, the national water
41 supply authorities and similar authorities.
42 NOTE 102:
43 Delete the second dashed item:
44 Add the following dashed item:
45 – for scrapping of appliances, additional requirements may be necessary.
46
47 Add the following new paragraph:
48 Products covered by this standard do not create a noise hazard; therefore no specific provisions
49 concerning noise are given.
3
---------------------- Page: 5 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
prEN IEC 60335-2-89:2020/prAA:2020 (E)
50 3 Modification to clause 2, "Normative references"
51 Add the following standards:
52 EN 614-1:2006+A1:2009, Safety of machinery – Ergonomic design principles – Part 1: Terminology
53 and general principles
54 EN 614-2:2000+A1:2008, Safety of machinery - Ergonomic design principles - Part 2: Interactions
55 between the design of machinery and work tasks
56 EN ISO 14159:2008, Safety of machinery - Hygiene requirements for the design of machinery (ISO
57 14159:2002)
58
59 4 Modification to clause 3, "Terms and Definitions"
60 Add the following definitions:
61 3.Z101 guard
62 part of the appliance specifically designed to provide protection by means of a physical barrier
63 3.Z102 operator
64 person installing, operating, adjusting, maintaining, cleaning or moving the appliance
65 3.Z103 commercial use
66 intended use of appliances covered by this standard in a professional way
67 Note 1 : For the purpose of this standard commercial use may be read as not intended for domestic use.
68 5 Modification to clause 4, "General requirement"
69 Replace the first paragraph of Part 1by the following:
70 Appliances shall be constructed so that they function safely so as to cause no danger to persons or
71 surroundings during normal use, even in the event of carelessness, and during installation, adjusting,
72 maintenance, cleaning, repairing or transportation.
73 6 Modification to clause 7, "Marking and instructions"
74 7.1 Replace the fourth and fifth dashed items in part 1 by:
75 - business name and full address of the manufacturer and, where applicable, his authorized
76 representative;
77 - model or type reference, serial number, if any, and production year;
78 NOTE Z101 Production year is the year when the production process is completed. The production year can be a part of the
79 serial number.
80 Add a new dashed item:
81 - designation of the appliance.
82 NOTE Z102 The designation may be a combination of letters and/or numbers and shall enable to identify the machine as
83 specified in the instructions.
4
---------------------- Page: 6 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
prEN IEC 60335-2-89:2020/prAA:2020 (E)
84 7.12 Add the following to the addition:
85 The instructions shall contain the following:
86 - business name and full address of the manufacturer and, where applicable, his authorized
87 representative;
88 - model or type reference of the appliance as marked on the appliance itself, except for the serial
89 number;
90 - designation of the appliance together with its explanation in case it is given by a combination of
91 letters and/or numbers;
92 - a general description of the appliance, when needed due to the complexity of the appliance;
93 - specific precautions if required during installation, operation, adjusting, user maintenance,
94 cleaning, repairing or moving;
95 - when needed drawings, diagrams, descriptions and explanations necessary for the safe use and
96 user maintenance of the appliance;
97 - the possible reasonably foreseeable misuse and, whenever relevant, a warning against the
98 effects it may have on the safe use of the appliance;
99 The words “Original instructions” shall appear on the language version(s) verified by the manufacturer
100 or by the authorized representative.
101 When a translation of the original instructions has been provided by a person introducing the
102 appliance on the market; the meaning of the sentence “Translation of the original instructions” has to
103 appear in the relevant instructions delivered with the appliance.
104 The instructions for maintenance/service to be done by specialized personnel, mandated by the
105 manufacturer or the authorized representative may be supplied in only one Community language
106 which the specialized personnel understand.
107 The instructions shall indicate the type and frequency of inspections and maintenance required for
108 safe operation including the preventive maintenance measures.
109 Add the new following sub-clauses:
110 7.12.Z101 Information shall be given:
111 – on use, transportation, assembly, dismantling when out of service, testing or foreseeable
112 breakdowns, if these operations have consequences on stability of the appliance in order to
113 avoid overturning, falling or uncontrolled movements of the appliance or of its component
114 parts;
115 – on how to maintain adequate mechanical stability when in use, during transportation,
116 assembly, dismantling, scrapping and any other action involving the appliance;
5
---------------------- Page: 7 ----------------------
oSIST prEN IEC 60335-2-89:2020/oprAA:2020
prEN IEC 60335-2-89:2020/prAA:2020 (E)
117 – on the protective measures to be taken by the user, including, where appropriate, the personal
118 protective equipment to be provided;
119 – on the operating method to be followed in the event of accident or breakdown; if a blockage is
120 likely to occur the operating method to safely unblock the appliance;
121 – on the specifications on the spare parts to be used, when these affect the health and safety of
122 the operator;
123 – that the A-weighted emission sound pressure level is below 70 dB(A);
124 7.12.1.Z102 Instructions shall be given, when necessary, concerning safe handling and
125 transportation on the packed appliance or have to be delivered together with the package.
126 7.12.1.Z103 If the installation instructions state that appliance can be placed on top of a other
127 appliance, they shall state which appliances are suitable. Instructions shall be given for the assembly
128 of the appliances. The instructions shall state how to obtain any fixing attachments required, unless
129 they are supplied with the appliance.
130 7.12.Z104 The instructions shall include a warning that the appliance shall be disconnected from its
131 power source during cleaning or maintenance and when replacing parts. If the removal of the plug is
132 foreseen, it shall be clearly indicated that the removal of the plug has to be such that an operator can
133 check from any of the points to which he has access that the plug remains removed.
134 If this is not possible, due to the construction of the appliance or its installation, a disconnection with a
135 locking system in the isolated position shall be provided.
136
137 7 Modification to clause 20, "Stability and mechanical hazards"
138 Add new sub clause:
139 20.1.Z101
140 Appliances and their components and fittings shall have adequate mechanical stability during
141 transportation, assembly
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.