Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular requirements for circular saws

This European Standard applies to hand-held motor-operated electric tools and deals with the measurement procedure for circular saws for measurements of dust emission.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 2-5: Besondere Anforderungen für Kreissägen

Outils électriques à moteur - Procédure de mesure de la poussière - Partie 2-5: Exigences particulières pour les scies circulaires

L'article de la Partie 1 est applicable avec l'exception suivante:
Addition:
La présente partie de l'EN 50632 s'applique aux scies circulaires.

Elektromotorna orodja - Postopek merjenja prahu - 2-5. del: Posebne zahteve za krožne žage

Ta evropski standard se uporablja za ročna elektromotorna orodja in obravnava postopek merjenja za krožne žage za izvajanje meritev emisije prahu.

General Information

Status
Published
Public Enquiry End Date
30-Jun-2015
Publication Date
16-Aug-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
28-Jul-2016
Due Date
02-Oct-2016
Completion Date
17-Aug-2016

Relations

Buy Standard

Standard
EN 50632-2-5:2016
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50632-2-5:2016
01-oktober-2016
Elektromotorna orodja - Postopek merjenja prahu - 2-5. del: Posebne zahteve za
krožne žage
Electric motor-operated tools - Dust measurement procedure - Part 2-5: Particular
requirements for circular saws
Ta slovenski standard je istoveten z: EN 50632-2-5:2016
ICS:
25.100.40 Žagni listi Saws
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50632-2-5:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50632-2-5:2016

---------------------- Page: 2 ----------------------

SIST EN 50632-2-5:2016

EUROPEAN STANDARD EN 50632-2-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 13.040.40; 25.140.20
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 2-5: Particular requirements for circular saws
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 2-5: Exigences particulières pour les Teil 2-5: Besondere Anforderungen für Kreissägen
scies circulaires
This European Standard was approved by CENELEC on 2016-05-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50632-2-5:2016 E

---------------------- Page: 3 ----------------------

SIST EN 50632-2-5:2016
EN 50632-2-5:2016 (E)

Contents
European foreword . 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Test procedure . 4
5 Instrumentation . 5
6 Information to be reported . 5
Tables
Table 101 – Operating conditions for circular saws intended to cut wood . 5
2

---------------------- Page: 4 ----------------------

SIST EN 50632-2-5:2016
EN 50632-2-5:2016 (E)

European foreword
This document (EN 50632-2-5:2016) has been prepared by CLC/TC 116 "Safety of motor-operated
electric tools".
The following dates are fixed:
(dop) 2017-05-03
• latest date by which this document has
to be i
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.