SIST EN 50632-3-1:2016

Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws

This clause of Part 1 is applicable, except as follows:
Addition:
This part of EN 50632 applies to transportable table saws intended to cut wood or wood-based materials.

Motorbetriebene Elektrowerkzeuge - Staubmessverfahren - Teil 3-1: Besondere Anforderungen für transportable Tischkreissägen

Outils électriques à moteur - Procédure de mesure de la poussière – Partie 3-1 : Exigences particulières pour les scies à table transportables

L’article de la Partie 1 est applicable avec l'exception suivante:
Addition:
La présente partie de l’EN 50632 s’applique aux scies à table transportables destinées à la découpe du bois ou de matériaux à base de bois.

Elektromotorna orodja - Postopek merjenja prahu - 3-1. del: Posebne zahteve za premične namizne žage

Ta točka 1. dela se uporablja, razen kot sledi:
Dodatek:
Ta del standarda EN 50632 se uporablja za premične namizne žage, namenjene za rezanje lesa ali materialov iz lesa.

General Information

• Status: Published
• Publication Date: 16-Aug-2016
• ICS: 25.100.40 - Saws
• ICS: 25.140.20 - Electric tools
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 28-Jul-2016
• Due Date: 02-Oct-2016
• Completion Date: 17-Aug-2016
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Ref Project: EN 50632-3-1:2016 - Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws

Relations

• Amended By: SIST EN 50632-3-1:2016/A1:2021 - Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular requirements for transportable table saws
• Effective Date: 01-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50632-3-1:2016
01-oktober-2016
(OHNWURPRWRUQDRURGMD3RVWRSHNPHUMHQMDSUDKXGHO3RVHEQH]DKWHYH]D
SUHPLþQHQDPL]QHåDJH
Electric motor-operated tools - Dust measurement procedure - Part 3-1: Particular
requirements for transportable table saws
Outils électriques à moteur - Procédure de mesure de la poussière – Partie 3-1 :
Exigences particulières pour les scies à table transportables
Ta slovenski standard je istoveten z: EN 50632-3-1:2016
ICS:
25.100.40 Žagni listi Saws
25.140.20 (OHNWULþQDRURGMD Electric tools
SIST EN 50632-3-1:2016 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50632-3-1:2016

---------------------- Page: 2 ----------------------

SIST EN 50632-3-1:2016

EUROPEAN STANDARD EN 50632-3-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2016
ICS 79.120.10; 13.040.40
English Version
Electric motor-operated tools - Dust measurement procedure -
Part 3-1: Particular requirements for transportable table saws
Outils électriques à moteur - Procédure de mesure de la Motorbetriebene Elektrowerkzeuge - Staubmessverfahren -
poussière - Partie 3-1: Exigences particulières pour les Teil 3-1: Besondere Anforderungen für transportable
scies à table transportables Tischkreissägen
This European Standard was approved by CENELEC on 2016-05-03. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 50632-3-1:2016 E

---------------------- Page: 3 ----------------------

SIST EN 50632-3-1:2016
EN 50632-3-1:2016 (E)
Contents
European foreword . 3
1 Scope . 4
2 Normative references. 4
3 Terms and definitions . 4
4 Test procedure . 4
5 Instrumentation . 5
6 Information to be reported . 5
Tables
Table 101 – Operating conditions for transportable table saws . 5
2

---------------------- Page: 4 ----------------------

SIST EN 50632-3-1:2016
EN 50632-3-1:2016 (E)
European foreword
This document (EN 50632-3-1:2016) has been prepared by CLC/TC 116 "Safety of motor-operated
electric tools".
The following dates are fixed:
• latest date by which this document has (dop) 2017-05-03
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2018-05-03
• latest date by which the national
standards conflicting with this
...