iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty!
SIST

SIST EN 17038-2:2019/AC:2020

(Corrigendum)

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

TC and CCMC - Correction of heading in 5.2.3 and corrections in formula cross references in 6.3.4 and 6.3.5

Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI) einzelner Pumpenaggregate

Pompes - Méthodes de qualification et de vérification de l'indice de rendement énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de l'indice de rendement énergétique (EEI) des groupes motopompes simples

Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske učinkovitosti (IEE) enodelnih črpalk - Popravek AC

General Information

Status
Published
Publication Date
19-Jul-2020
ICS
23.080 - Pumps
27.015 - Energy efficiency. Energy conservation in general
Technical Committee
I13 - Imaginarni 13
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
09-Jul-2020
Due Date
13-Sep-2020
Completion Date
20-Jul-2020
Ref Project
EN 17038-2:2019/AC:2020 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI) of single pump units

RELATIONS

Corrects
SIST EN 17038-2:2019 - Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
Effective Date
11-May-2020

Buy Standard

SIST EN 17038-2:2019/AC:2020SIST EN 17038-2:2019/AC:2020
PreviousNext
Corrigendum
SIST EN 17038-2:2019/AC:2020
English language
3 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 17038-2:2019/AC:2020
01-september-2020

Črpalke - Metode za kvalifikacijo in verifikacijo indeksa energijske učinkovitosti

centrifugalnih črpalk - 2. del: Preskušanje in računanje indeksa energijske
učinkovitosti (IEE) enodelnih črpalk - Popravek AC

Pumps - Methods of qualification and verification of the Energy Efficiency Index for

rotodynamic pump units - Part 2: Testing and calculation of Energy Efficiency Index (EEI)

of single pump units

Pumpen - Methoden zur Qualifikation und Verifikation des Energieeffizienzindexes für

Kreiselpumpen - Teil 2: Prüfung und Berechnung des Energieeffizienzindexes (EEI)
einzelner Pumpenaggregate
Pompes - Méthodes de qualification et de vérification de l'indice de rendement

énergétique des groupes motopompes rotodynamiques - Partie 2 : Essais et calcul de

l'indice de rendement énergétique (EEI) des groupes motopompes simples
Ta slovenski standard je istoveten z: EN 17038-2:2019/AC:2020
ICS:
23.080 Črpalke Pumps
27.015 Energijska učinkovitost. Energy efficiency. Energy
Ohranjanje energije na conservation in general
splošno
SIST EN 17038-2:2019/AC:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 17038-2:2019/AC:2020
---------------------- Page: 2 ----------------------
SIST EN 17038-2:2019/AC:2020
EUROPEAN STANDARD EN 17038-2:2019/AC
NORME EUROPÉENNE
July 2020
EUROPÄISCHE NORM
ICS 23.080
English version
Pumps - Methods of qualification and verification of the Energy Efficiency
Index for rotodynamic pump units - Part 2: Testing and calculation of Energy
Efficiency Index (EEI) of single pump units

Pompes - Méthodes de qualification et de Pumpen - Methoden zur Qualifikation und

vérification de l'indice de rendement Verifikation des Energieeffizienzindexes für

énergétique des groupes motopompes Kreiselpumpen - Teil 2: Prüfung und

rotodynamiques - Partie 2 : Essais et calcul de Berechnung des Energieeffizienzindexes

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 17038-2:2019(Main)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
EN 17038-2:2019

This European standard specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this standard are described in the normative Annex A.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14414:2019(Main)
Pump system energy assessment (ISO/ASME 14414:2019)
EN ISO 14414:2019

This document sets the requirements for conducting and reporting the results of a pumping system
energy assessment (hereafter referenced as “assessment”) that considers the entire pumping system,
from energy inputs to the work performed as the result of these inputs.
The objective of a pumping system energy assessment is to determine the current energy consumption
of an existing system and identify ways to improve system efficiency.
These requirements consist of
— organizing and conducting an assessment,
— analysing the data from the assessment, and
— reporting and documenting assessment findings.
This document is designed to be applied, to open and closed loop pumping systems typically used at
industrial, institutional, commercial, and municipal facilities, when requested.
This document is focused on assessing electrically-driven pumping systems, which are dominant in
most facilities, but is also applicable with other types of drivers, such as steam turbines and engines.
The document does not
a) specify how to design a pumping system,
b) give detailed qualifications and expertise required of the person using the International Standard
although provides a list of body of knowledge in Annex C,
c) address the training or certification of persons,
d) specify how to implement the recommendations developed during the assessment, but does include
requirements for an action plan,
e) specify how to measure and validate the energy savings that result from implementing assessment
recommendations,
f) specify how to make measurements and how to calibrate test equipment used during the
assessment,
g) specify how to estimate the implementation cost or conduct financial analysis for recommendations
developed during the assessment,
h) specify specific steps required for safe operation of equipment during the assessment. The facility
personnel in charge of normal operation of the equipment are responsible for ensuring that it is
operated safely during the data collection phase of the assessment,
i) address issues of intellectual property, security, confidentiality, and safety.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17038-2:2019(Main)
Pumps - Methods of qualification and verification of the Energy Efficiency Index for rotodynamic pumps units - Part 2: Testing and calculation of energy Efficiency Index (EEI) of single pump units
EN 17038-2:2019

This European standard specifies methods and procedures for testing, calculating and determining the Energy Efficiency Index (EEI) of rotodynamic glanded single pump units for pumping clean water, including where integrated in other products.
The pump types and sizes covered by this standard are described in the normative Annex A.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 14414:2019(Main)
Pump system energy assessment (ISO/ASME 14414:2019)
EN ISO 14414:2019

This document sets the requirements for conducting and reporting the results of a pumping system
energy assessment (hereafter referenced as “assessment”) that considers the entire pumping system,
from energy inputs to the work performed as the result of these inputs.
The objective of a pumping system energy assessment is to determine the current energy consumption
of an existing system and identify ways to improve system efficiency.
These requirements consist of
— organizing and conducting an assessment,
— analysing the data from the assessment, and
— reporting and documenting assessment findings.
This document is designed to be applied, to open and closed loop pumping systems typically used at
industrial, institutional, commercial, and municipal facilities, when requested.
This document is focused on assessing electrically-driven pumping systems, which are dominant in
most facilities, but is also applicable with other types of drivers, such as steam turbines and engines.
The document does not
a) specify how to design a pumping system,
b) give detailed qualifications and expertise required of the person using the International Standard
although provides a list of body of knowledge in Annex C,
c) address the training or certification of persons,
d) specify how to implement the recommendations developed during the assessment, but does include
requirements for an action plan,
e) specify how to measure and validate the energy savings that result from implementing assessment
recommendations,
f) specify how to make measurements and how to calibrate test equipment used during the
assessment,
g) specify how to estimate the implementation cost or conduct financial analysis for recommendations
developed during the assessment,
h) specify specific steps required for safe operation of equipment during the assessment. The facility
personnel in charge of normal operation of the equipment are responsible for ensuring that it is
operated safely during the data collection phase of the assessment,
i) address issues of intellectual property, security, confidentiality, and safety.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 50554:2021(Main)
Basic standard for the in-situ assessment of a broadcast site related to general public exposure to radio frequency electromagnetic fields
EN 50554:2021

This document specifies the method for assessing overall exposure from all fixed radio frequency sources at a broadcast site. This assessment can be applied at any time but is carried out when the exposure situation changes in or around the aforementioned site.
This document plays an essential role in the coordination of different stakeholders, with respect to ensuring EMF exposure compliance in and around a broadcast site especially for equipment installed within the site.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CLC/TS 50459-2:2021(Main)
Railway applications - Communication, signalling and processing systems - European Rail Traffic Management System - Part 2: Ergonomic arrangements of GSM-R information
CLC/TS 50459-2:2021

Unchanged with respect to the current edition CLC/TS 50459-2:2015.
Scope of the revision:
- to update general principles for the presentation of ERTMS/ETCS/GSM-R information correlated with ERA_ERTMS_015560 v3.4.0:2016,
- to update ergonomic arrangements with EN 16186-1:2014, EN 16186-2:2017, EN 16186-3:2016
- to harmonize layout with existing and on supplier side well-established solutions and enhancement of touch-layout
- to update in accordance to the Results of the outcome of the Rascop DMI ad’hoc group

  • Technical specification
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 20743:2021(Main)
Textiles - Determination of antibacterial activity of textile products (ISO 20743:2021)
EN ISO 20743:2021
  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16094:2021(Main)
Laminate floor coverings - Test method for the determination of micro-scratch resistance
EN 16094:2021

This European Standard specifies a test method for the micro-scratch resistance with two procedures (A and B) and a test method for polishing resistance (procedure C) which can be used for all types of laminate floor coverings. The resistance to polishing is related to mat surfaces.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17225-2:2021(Main)
Solid biofuels - Fuel specifications and classes - Part 2: Graded wood pellets (ISO 17225-2:2021)
EN ISO 17225-2:2021
  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 7083:2021(Main)
Technical product documentation - Symbols used in technical product documentation - Proportions and dimensions (ISO 7083:2021)
EN ISO 7083:2021
  • Standard
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day