oSIST prEN 15273-1:2019

Railway applications - Gauges - Part 1: Generic explanations and methods of gauging

The gauges and processes included in this standard have been developed for application on mainline railway networks using various track gauges. Other networks such as urban and suburban may apply the gauge rules defined in this standard but are outside of its scope.
This document prEN 15273-1 contains:
— the definitions and symbols for all prEN 15273 documents;
— the general explanation of various elements and phenomena affecting railway gauging;
— the general explanation of various calculation methods and processes applicable to railway;
— gauging that allow the dimensioning of the rolling stock and the infrastructure.
NOTE The rules given in this standard are not applicable to the gauges “S” and “T” referred to in clause 4.2.3.1. (7) & (8) for track gauge 1520 mm of the merged TSI Loc and Pass (Commission Regulation N° 1302/2014 of 18 November 2014).

Bahnanwendungen - Begrenzungslinien - Teil 1: Grundprinzipien und Methoden der Lichtraumbestimmung

Applications ferroviaires - Gabarits - Partie 1 : Explications de base et méthodes de détermination du gabarit

Železniške naprave - Profili - 1. del: Splošna pojasnila in metode za določanje profilov

General Information

• Status: Not Published
• Public Enquiry End Date: 28-Feb-2019
• ICS: 45.060.01 - Railway rolling stock in general
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 23-Mar-2023
• Due Date: 28-Mar-2023
• Completion Date: 23-Mar-2023
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
• Ref Project: prEN 15273-1:2018 - Railway applications - Gauges - Part 1: Generic explanations and methods of gauging

Relations

• Revised: SIST EN 15273-1:2013+A1:2017 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
• Effective Date: 19-Jan-2023
• Revised: SIST EN 15273-1:2013+A1:2017 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
• Effective Date: 18-Jan-2023
• Revised: SIST EN 15273-1:2013+A1:2017 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
• Effective Date: 09-Nov-2016
• Revised: SIST EN 15273-1:2013 - Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock
• Effective Date: 05-Jun-2013

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 15273-1:2019
01-februar-2019
äHOH]QLãNHQDSUDYH3URILOLGHO6SORãQDSRMDVQLODLQPHWRGH]DGRORþDQMH
SURILORY
Railway applications - Gauges - Part 1: Generic explanations and methods of gauging
Bahnanwendungen - Begrenzungslinien - Teil 1: Grundprinzipien und Methoden der
Lichtraumbestimmung
Applications ferroviaires - Gabarits - Partie 1 : Explications de base et méthodes de
détermination du gabarit
Ta slovenski standard je istoveten z: prEN 15273-1:2018
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
oSIST prEN 15273-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 15273-1:2019

---------------------- Page: 2 ----------------------
oSIST prEN 15273-1:2019


DRAFT
EUROPEAN STANDARD
prEN 15273-1
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2018
ICS 45.020; 45.060.01 Will supersede EN 15273-1:2013+A1:2016
English Version

Railway applications - Gauges - Part 1: Generic
explanations and methods of gauging
Applications ferroviaires - Gabarits - Partie 1 : Bahnanwendungen - Lichtraum - Teil 1: Teil 1:
Explications de base et méthodes de détermination du Grundprinzipien und Methoden der
gabarit Lichtraumbestimmung
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15273-1:2018:2018 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 15273-1:2019
prEN 15273-1:2018 (E)
Contents
Page
European foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Symbols and abbreviations . 18
4.1 Common symbols . 18
4.2 Specific symbols for absolute and comparative gauging processes . 30
5 Approaches to gauging . 34
5.1 Railway gauging processes . 34
5.2 How to use prEN 15273 .
...