SIST EN 13146-5:2004
(Main)Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance
Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance
This part of EN 13146 specifies a laboratory test procedure for determining the electrical resistance, in wet conditions, between the running rails provided by a fastening system fitted to a concrete sleeper. Performance requirements based on this test method are included in EN 13481.
Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 5: Bestimmung des elektrischen Widerstandes
Dieser Teil der Normenreihe EN 13146 legt ein Laborprüfverfahren zur Bestimmung des elektrischen Widerstandes unter Nassbedingungen zwischen den Fahrschienen fest, die mittels eines Befestigungssystems auf einer Stahl- oder Betonschwelle, Lager oder einem Bauteil der festen Fahrbahn befestigt sind.
Dieses Prüfverfahren gilt für ein komplettes Schienenbefestigungssystem.
Applications ferroviaires - Voie - Méthodes d'essai pour les systemes de fixation - Partie 5: Détermination de la résistance électrique
La présente partie de la présente Norme européenne prescrit une méthode d'essai en laboratoire visant a déterminer la résistance électrique, assurée par un systeme de fixation sur une traverse en acier ou en béton, un support ou un élément de voie sur dalle dans des conditions humides, entre les deux rails.
Cette méthode d'essai s'applique a un ensemble de fixation complet.
Železniške naprave – Zgornji ustroj – Preskušanje pritrdilnih sistemov – 5. del: Ugotavljanje električne upornosti
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Oberbau - Prüfverfahren für Schienenbefestigungssysteme - Teil 5: Bestimmung des elektrischen WiderstandesApplications ferroviaires - Voie - Méthodes d'essai pour les systemes de fixation - Partie 5: Détermination de la résistance électriqueRailway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance93.100Gradnja železnicConstruction of railwaysICS:Ta slovenski standard je istoveten z:EN 13146-5:2002SIST EN 13146-5:2004en01-marec-2004SIST EN 13146-5:2004SLOVENSKI
STANDARD
SIST EN 13146-5:2004
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13146-5November 2002ICS 93.100English versionRailway applications - Track - Test methods for fasteningsystems - Part 5: Determination of electrical resistanceApplications ferroviaires - Voie - Méthodes d'essai pour lessystèmes de fixation - Partie 5: Détermination de larésistance électriqueBahnanwendungen - Oberbau - Prüfverfahren fürSchienenbefestigungssysteme - Teil 5: Bestimmung deselektrischen WiderstandesThis European Standard was approved by CEN on 18 October 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13146-5:2002 ESIST EN 13146-5:2004
EN 13146-5:2002 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions, symbols and abbreviations.43.1Terms and definitions.43.2Symbols and abbreviations.44Principle.45Apparatus.45.1Rail.45.2Water.55.3Spray equipment.55.4Electricity supply.55.5Instruments.56Test specimens.57Procedure.58Calculations.79Test report.7Annex A (informative)
Resistance/time plot.8SIST EN 13146-5:2004
EN 13146-5:2002 (E)3ForewordThis document (EN 13146-5:2002) has been prepared by Technical Committee CEN /TC 256 "Railwayapplications", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2003, and conflicting national standards shall be withdrawn at the latest byMay 2003.This document has been prepared under mandates (M/0241), M/2752)) given to CEN by the European Commissionand the European Free Trade Association, and supports essential requirements of EU Directive(s). No existingEuropean Standard is superseded.In this European Standard the annex A is informative.This European Standard is one of the series EN 13146 as listed below.¾ Part 1 : Determination of longitudinal rail restraint¾ Part 2 : Determination of torsional resistance¾ Part 3 : Determination of attenuation of impact loads¾ Part 4 : Effect of repeated loading¾ Part 5 : Determination of electrical resistance¾ Part 6 : Effect of severe environmental conditions¾ Part 7 : Determination of clamping force¾ Part 8 : In service testingThese support the requirements in the series EN 13481 Railway applications — Track — Performancerequ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.