SIST EN 60851-3:2009

Winding wires - Test methods -- Part 3: Mechanical properties

This part of IEC 60851 specifies the following methods of test for winding wires:
– Test 6: Elongation;
– Test 7: Springiness;
– Test 8: Flexibility and adherence;
– Test 11: Resistance to abrasion;
– Test 18: Heat bonding.
For definitions, general notes on methods of test and the complete series of methods of test for winding wires, see IEC 60851-1.

Wickeldrähte - Prüfverfahren - Teil 3: Mechanische Eigenschaften

Fils de bobinage - Méthodes d'essai -- Partie 3: Propriétés mécaniques

La CEI 60851-3:2009 spécifie les méthodes d'essai suivantes des fils de bobinage:  - Essai 6: Allongement;  - Essai 7: Effet de ressort;  - Essai 8: Souplesse et adhérence;  - Essai 11: Résistance à l'abrasion;  - Essai 18: Thermo-adhérence.  Par rapport à l'édition précédente, des modifications techniques majeures sont introduites au Paragraphe 5.3, Essai de traction brusque.

Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti (IEC 60851-3:2009)

General Information

• Status: Published
• Publication Date: 18-Aug-2009
• ICS: 29.060.10 - Wires
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Jul-2009
• Due Date: 11-Sep-2009
• Completion Date: 19-Aug-2009
• Ref Project: EN 60851-3:2009 - Winding wires - Test methods - Part 3: Mechanical properties

Relations

• Replaces: SIST EN 60851-3:2001/A2:2004 - Winding wires - Test methods -- Part 3: Mechanical properties
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60851-3:2001/A1:2001 - Winding wires - Test methods -- Part 3: Mechanical properties
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60851-3:2001 - Winding wires - Test methods -- Part 3: Mechanical properties
• Effective Date: 28-Jan-2023
• Replaces: SIST EN 60851-3:2001/A1:2001 - Winding wires - Test methods -- Part 3: Mechanical properties
• Effective Date: 07-Jun-2022
• Amended By: SIST EN 60851-3:2009/A1:2014 - Winding wires - Test methods - Part 3: Mechanical properties
• Effective Date: 28-Jan-2023
• Revised: SIST EN IEC 60851-3:2023 - Winding wires - Test methods - Part 3: Mechanical properties (IEC 60851-3:2023)
• Effective Date: 10-May-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Navijalne žice - Preskusne metode - 3. del: Mehanske lastnosti (IEC 60851-3:2009)Fils de bobinage - Méthodes d'essai -- Partie 3: Propriétés mécaniquesWinding wires - Test methods -- Part 3: Mechanical properties29.060.10ŽiceWiresICS:Ta slovenski standard je istoveten z:EN 60851-3:2009SIST EN 60851-3:2009en01-september-2009SIST EN 60851-3:2009SLOVENSKI
STANDARD



SIST EN 60851-3:2009



EUROPEAN STANDARD EN 60851-3 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2009
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: avenue Marnix 17, B - 1000 Brussels
© 2009 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60851-3:2009 E
ICS 29.060.10 Supersedes EN 60851-3:1996 + A1:1997 + A2:2003
English version
Winding wires -
Test methods -
Part 3: Mechanical properties (IEC 60851-3:2009)
Fils de bobinage -
Méthodes d'essai -
Partie 3: Propriétés mécaniques (CEI 60851-3:2009)
Wickeldrähte -
Prüfverfahren -
Teil 3: Mechanische Eigenschaften (IEC 60851-3:2009)
This European Standard was approved by CENELEC on 2009-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 60851-3:2009



EN 60851-3:2009 – 2 – Foreword The text of document 55/1043/CDV, future edition 3 of IEC 60851-3, prepared by IEC TC 55, Winding wires, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60851-3 on 2009-04-01. This European Standard supersedes EN 60851-3:1996 + A1:1997 + A2:2003. With respect to EN 60851-3:1996, significant technical changes appear in Subclause 5.3, Jerk test. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2010-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2012-04-01 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 60851-3:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60851-5 NOTE
Harmonized as EN 60851-5:2008 (not modified). IEC 61033 + A1 NOTE
Harmonized as EN 61033:2006 (not modified). __________ SIST EN 60851-3:2009



– 3 – EN 60851-3:2009
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60851-1 - 1) Winding wires - Test methods -
Part 1: General EN 60851-1 1996 2)
IEC 60851-2 1996 Winding wires - Test methods -
Part 2: Determination of dimensions EN 60851-2 1996
ISO 178 A1 2001 2004 Plastics - Determination of flexural
properties EN ISO 178 A1 2003 2005
1) Undated reference.
2) Valid edition at date of issue.
SIST EN 60851-3:2009



SIST EN 60851-3:2009



IEC 60851-3Edition 3.0 2009-01INTERNATIONAL STANDARD NORME INTERNATIONALEWinding wires – Test methods –
Part 3: Mechanical properties
Fils de bobinage – Méthodes d'essai –
Partie 3: Propriétés mécaniques
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE XICS 29.060.10 PRICE CODECODE PRIXISBN 2-8318-1026-0
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale ® SIST EN 60851-3:2009



– 2 – 60851-3 ©
...