SIST EN ISO 22435:2009/A1:2013
(Amendment)Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and type testing (ISO 22435:2007/Amd 1:2012)
This International Standard applies to cylinder valves with integrated pressure regulators (VIPR) intended to be fitted to gas cylinders that convey compressed, liquefied or dissolved gases. This International Standard is not intended for medical applications (see ISO 10524-3). Further, additional specific requirements for valves fitted with safety valves and bursting discs (see EN 14513) and for valves fitted with residual pressure valves (see ISO 15996) are not covered by this International Standard.
Gasflaschen - Flaschenventile mit integriertem Druckminderer - Allgemeine Anforderungen und Typprüfung (ISO 22435:2007/Amd 1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et essais de type (ISO 22435:2007/Amd 1:2012)
Plinske jeklenke - Ventili za jeklenke z vgrajenim regulatorjem tlaka - Specifikacija in preskus tipa - Dopolnilo A1 (ISO 22435:2007/Amd 1:2012)
Ta mednarodni standard se uporablja za ventile za jeklenke z vgrajenim regulatorjem tlaka (VIPR), ki so namenjeni vgradnji v plinske jeklenke, ki prenašajo stisnjene, utekočinjene ali raztopljene pline. Ta mednarodni standard ni namenjen uporabi v medicinske namene (glej ISO 10524-3). Poleg tega ta mednarodni standard ne zajema dodatnih posebnih zahtev za ventile, opremljene z varnostnimi ventili in razpočnimi ploščami (glej EN 14513), ter za ventile, opremljene s preostalimi tlačnimi ventili (glej ISO 15996).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 22435:2009/A1:2013
01-november-2013
Plinske jeklenke - Ventili za jeklenke z vgrajenim regulatorjem tlaka - Specifikacija
in preskus tipa - Dopolnilo A1 (ISO 22435:2007/Amd 1:2012)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and
type testing (ISO 22435:2007/Amd 1:2012)
Gasflaschen - Flaschenventile mit integriertem Druckminderer - Allgemeine
Anforderungen und Typprüfung (ISO 22435:2007/Amd 1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et
essais de type (ISO 22435:2007/Amd 1:2012)
Ta slovenski standard je istoveten z: EN ISO 22435:2007/A1:2012
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN ISO 22435:2009/A1:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22435:2009/A1:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 22435:2009/A1:2013
EUROPEAN STANDARD
EN ISO 22435:2007/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 23.020.30
English Version
Gas cylinders - Cylinder valves with integrated pressure
regulators - Specification and type testing (ISO 22435:2007/Amd
1:2012)
Bouteilles à gaz - Robinets de bouteilles avec détendeur Gasflaschen - Flaschenventile mit integriertem
intégré - Spécifications et essais de type (ISO Druckminderer - Allgemeine Anforderungen und
22435:2007/Amd 1:2012) Typprüfung (ISO 22435:2007/Amd 1:2012)
This amendment A1 modifies the European Standard EN ISO 22435:2007; it was approved by CEN on 30 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22435:2007/A1:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22435:2009/A1:2013
EN ISO 22435:2007/A1:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22435:2009/A1:2013
EN ISO 22435:2007/A1:2012 (E)
Foreword
This document (EN ISO 22435:2007/A1:2012) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This Amendment to the European Standard EN ISO 22435:2007 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by June 2013, and
conflicting national standards shall be withdrawn at the latest by June 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 22435:2007/Amd 1:2012 has been approved by CEN as a EN ISO 22435:2007/A1:2012
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22435:2009/A1:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 22435:2009/A1:2013
INTERNATIONAL ISO
STANDARD 22435
First edition
2007-09-01
AMENDMENT 1
2012-12-01
Gas cylinders — Cylinder valves with
integrated pressure regulators —
Specification and type testing —
Amendment 1
Bouteilles à gaz — Robinets de bouteilles avec détendeur intégré —
Spécifications et essais de type — Amendement 1
Reference number
...
SLOVENSKI STANDARD
SIST EN ISO 22435:2009/oprA1:2011
01-september-2011
Plinske jeklenke - Ventili za jeklenke z vgrajenim regulatorjem tlaka - Specifikacija
in preskušanje tipa (ISO 22435:2007/DAM 1:2011)
Gas cylinders - Cylinder valves with integrated pressure regulators - Specification and
type testing (ISO 22435:2007/DAM 1:2011)
Gasflaschen - Druckminderer in Flaschenventilen - Allgemeine Anforderungen und
Typprüfung (ISO 22435:2007/DAM 1:2011)
Bouteilles à gaz - Robinets de bouteilles avec détendeur intégré - Spécifications et
essais de type (ISO 22435:2007/DAM 1:2011)
Ta slovenski standard je istoveten z: EN ISO 22435:2007/prA1
ICS:
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
23.060.40 7ODþQLUHJXODWRUML Pressure regulators
SIST EN ISO 22435:2009/oprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
---------------------- Page: 2 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
EUROPEAN STANDARD
DRAFT
EN ISO 22435:2007
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
May 2011
ICS 23.020.30
English Version
Gas cylinders - Cylinder valves with integrated pressure
regulators - Specification and type testing (ISO
22435:2007/DAM 1:2011)
Bouteilles à gaz - Robinets de bouteilles avec détendeur Gasflaschen - Druckminderer in Flaschenventilen -
intégré - Spécifications et essais de type (ISO Allgemeine Anforderungen und Typprüfung (ISO
22435:2007/DAM 1:2011) 22435:2007/DAM 1:2011)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 23.
This draft amendment A1, if approved, will modify the European Standard EN ISO 22435:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 22435:2007/prA1:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
EN ISO 22435:2007/prA1:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
EN ISO 22435:2007/prA1:2011 (E)
Foreword
This document (EN ISO 22435:2007/prA1:2011) has been prepared by Technical Committee ISO/TC 58 "Gas
cylinders" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders” the secretariat
of which is held by BSI.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 22435:2007/DAM 1:2011 has been approved by CEN as a EN ISO 22435:2007/prA1:2011
without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
---------------------- Page: 6 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
DRAFT AMENDMENT ISO 22435:2007/DAM 1
ISO/TC 58/SC 2 Secretariat: AFNOR
Voting begins on Voting terminates on
2011-05-05 2011-10-05
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Gas cylinders — Cylinder valves with integrated pressure
regulators — Specification and type testing
AMENDMENT 1
Bouteilles à gaz — Robinets de bouteilles avec détendeur intégré — Spécifications et essais de type
AMENDEMENT 1
ICS 23.020.30
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for Standardization (ISO), and
processed under the ISO-lead mode of collaboration as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member bodies for a parallel
five-month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments received, will be
submitted to a parallel two-month approval vote in ISO and formal vote in CEN.
To expedite distribution, this document is circulated as received from the committee
secretariat. ISO Central Secretariat work of editing and text composition will be undertaken at
publication stage.
Pour accélérer la distribution, le présent document est distribué tel qu'il est parvenu du
secrétariat du comité. Le travail de rédaction et de composition de texte sera effectué au
Secrétariat central de l'ISO au stade de publication.
THIS DOCUMENT IS A DRAFT CIRCULATED FOR COMMENT AND APPROVAL. IT IS THEREFORE SUBJECT TO CHANGE AND MAY NOT BE
REFERRED TO AS AN INTERNATIONAL STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS BEING ACCEPTABLE FOR INDUSTRIAL, TECHNOLOGICAL, COMMERCIAL AND USER PURPOSES, DRAFT
INTERNATIONAL STANDARDS MAY ON OCCASION HAVE TO BE CONSIDERED IN THE LIGHT OF THEIR POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED TO SUBMIT, WITH THEIR COMMENTS, NOTIFICATION OF ANY RELEVANT PATENT RIGHTS OF WHICH
THEY ARE AWARE AND TO PROVIDE SUPPORTING DOCUMENTATION.
© International Organization for Standardization, 2011
---------------------- Page: 7 ----------------------
SIST EN ISO 22435:2009/oprA1:2011
ISO 22435:2007/DAM 1
Copyright notice
Thi
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.