SIST EN 10164:2005
(Main)Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
This European Standard specifies through thickness properties and associated test methods for flat products and sections of steel.
This European Standard may be applied as a supplement to all product standards for flat products and sections of killed steels, except stainless steels. It covers products having a thickness between 15 mm and 400 mm inclusive of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 L 960 MPa ) for which improved through thickness properties are required.
The application of this European Standard to other product thicknesses and other steel types shall be the subject of agreement at the time of the order.
See option 1.
Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische Lieferbedingungen
Dieses Dokument legt Anforderungen fest an die Eigenschaften senkrecht zur Erzeugnisoberflache von
Flacherzeugnissen und Profilen aus Stahl sowie die entsprechenden Prufverfahren.
Dieses Dokument kann als Erganzung zu allen Erzeugnisnormen fur Flacherzeugnisse und Profile aus voll
beruhigten Stahlen mit Ausnahme der nichtrostenden Stahle angewendet werden. Sie gilt fur Erzeugnisse in
Dicken von 15 mm bis 400 mm aus Stahlen mit einem festgelegten Mindestwert der oberen Streckgrenze ReH oder
der Dehngrenze Rp0,2 !Â960 MPa 1) , fur die verbesserte Eigenschaften senkrecht zur Erzeugnisoberflache gefordert
werden.
Die Anwendung dieses Dokumentes auf andere Erzeugnisdicken und Stahlsorten ist bei der Bestellung besonders
zu vereinbaren.
Siehe Option 1.
Aciers de construction a caractéristiques de déformation améliorées dans le sens perpendiculaire a la surface du produit - Conditions techniques de livraison
Jekleni izdelki z izboljšanimi deformacijskimi lastnostmi, pravokotno na površino izdelka – Tehnični dobavni pogoji
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische LieferbedingungenAciers de construction a caractéristiques de déformation améliorées dans le sens perpendiculaire a la surface du produit - Conditions techniques de livraisonSteel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions77.140.01Železni in jekleni izdelki na splošnoIron and steel products in generalICS:Ta slovenski standard je istoveten z:EN 10164:2004SIST EN 10164:2005en01-februar-2005SIST EN 10164:2005SLOVENSKI
STANDARDSIST EN 10164:19981DGRPHãþD
SIST EN 10164:2005
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 10164
December 2004 ICS 77.140.70 Supersedes EN 10164:1993 English version
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions
Aciers de construction à caractéristiques de déformation améliorées dans le sens perpendiculaire à la surface du produit - Conditions techniques de livraison
Stahlerzeugnisse mit verbesserten Verfomungseigenschaften senkrecht zur Erzeugnisoberfläche - Technische Lieferbedingungen This European Standard was approved by CEN on 4 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2004 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 10164:2004: ESIST EN 10164:2005
EN 10164:2004 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Designation.5 4 Information to be supplied by the purchaser.6 4.1 Mandatory information.6 4.2 Options.6 5 Requirements.6 5.1 Reduction of area.6 5.2 Ultrasonic testing.7 6 Inspection.7 6.1 Test units.7 6.1.1 General.7 6.1.2 Flat products.7 6.1.3 Sections.8 7 Preparation of samples and test pieces.8 7.1 Location and orientation of samples and test pieces.8 7.1.1 Preparation of samples.8 7.1.2 Preparation of test pieces.9 7.2 Identification of samples and test pieces.12 8 Test method.12 8.1 Tensile test.12 8.2 Retest.13 8.3 Invalidation of tests.13 9 Marking, labelling and packaging.13 10 Complaints.13 11 Options (see 4.2).13 Bibliography.14
SIST EN 10164:2005
EN 10164:2004 (E) 3 Foreword This document (EN 10164:2004) has been prepared by Technical Committee ECISS/TC 10 “Structural steels – Grades and qualities”, the secretariat of which is held by NEN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by June 2005, and conflicting national standards shall be withdrawn at the latest by June 2005. This document supersedes EN 10164:1993, Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions. During the 5 year review of EN 10164:1993 the members of ECISS/TC 10 agreed to revise EN 10164:1993. It was asked to actualise the normative references and to bring the text in line with “Iron and steel standardization – Model for a product standard”. In the scope the product thickness is increased to 400 mm to be in line with EN 10025-2. The upper yield strength is increased to 960 MPa to be in line with EN 10025-6. This document includes a Bibliography. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
SIST EN 10164:2005
EN 10164:2004 (E) 4 Introduction Flat products and sections of steel as normally manufactured have deformation properties perpendicular to the surface (through thickness) which are different from those obtained in the surface direction. This anisotropy of the properties may lead to difficulties in welded structures, for instance lamellar tearing. It is, however, possible to improve the through thickness properties by using additional steel making procedures. Through thickness properties are characterized in this document by specified values for reduction of area in a through thickness tensile test. There is no direct relationship between these values and the integrity of structures, because the risk of lamellar tearing is also basically influenced by the type of structure, weld design and welding procedure. The minimum values for reduction of area in this document cannot therefore by themselves be regarded as ensuring safety against occurrence of lamellar tearing. However the reduction of area is a good general guide to lamellar tear resistance i.e. the risk of lamellar tearing decreases with increased reduction of area in the through thickness tensile test. SIST EN 10164:2005
EN 10164:2004 (E) 5 1 Scope This document specifies through thickness properties and associated test methods for flat products and sections of steel. This document may be applied as a supplement to all product standards for flat products and sections of fully killed steels, except stainless steels. It covers products having a thickness between 15 mm and 400 mm inclusive of steels with a specified minimum upper yield strength ReH or proof strength Rp0,2 ≤ 960 MPa1) for which improved through thickness properties are required. The application of this document to other product thicknesses and other steel types shall be the subject of agreement at the time of the order. See option 1. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test at ambient temperature EN 10021, General technical delivery requirements for steel and iron products EN 10160, Ultrasonic testing of steel flat product of thickness equal to or greater than 6 mm (reflection method) EN 10306:2001, Iron and steel - Ultrasonic testing of H beams with parallel flanges and IPE beams 3 Designation Products with requirements for improved deformation properties perpendicular to the surface of the product shall be designated as fo
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.