oSIST prEN ISO/ASTM 52943-2:2023

Additive manufacturing for aerospace - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc (ISO/ASTM DIS 52943-2:2023)

This document specifies requirements for the additive manufacturing of metallic parts with directed energy deposition in the aerospace industry. These can be additively generated parts or additively generated additions to existing parts. Within the application scope of this document, wire is used as feedstock, and arc processes (gas-shielded metal arc processes, Tungsten inert gas processes, plasma arc processes) are the main energy source.
This document is to be used in conjunction with the engineering documents, if required by the engineering authority.

Additive Fertigung für Luft- und Raumfahrt - Prozessanforderungen und Qualifizierung - Teil 2: Materialauftrag mit gerichteter Energieeinbringung unter Verwendung von Draht und Lichtbogen (ISO/ASTM DIS 52943-2:2023)

Dieses Dokument legt Anforderungen an die additive Fertigung metallischer Bauteile durch Materialauftrag mit gerichteter Energieeinbringung in der Luft- und Raumfahrt fest. Es kann sich dabei um vollständig additiv erzeugte Bauteile oder um additiv erzeugte Ergänzungen an bestehenden Bauteilen handeln. Im Anwendungsbereich dieses Dokuments wird als Zusatzwerkstoff Draht und als Hauptenergiequelle der Lichtbogen (Schutzgasschweißen, Wolfram-Intertgasschweißen, Plasmabogenverfahren) verwendet.
Dieses Dokument ist in Verbindung mit den Entwicklungsunterlagen zu verwenden, falls von der verantwortlichen Entwicklungsstelle gefordert.
Dieses Dokument gilt nicht für nationale oder internationale Sicherheits- und Gesundheitsvorschriften.

Fabrication additive pour l'aérospatiale - Caractéristiques et performances du procédé - Partie 2: Dépôt d'énergie dirigée utilisant du fil et un arc (ISO/ASTM DIS 52943-2:2023)

Aditivna proizvodnja v letalski in vesoljski industriji - Karakteristike in zmogljivost procesa - 2. del: Oblikovno obločno navarjanje z žico (ISO/ASTM DIS 52943-2:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 02-Jul-2023
• ICS: 25.030 - Additive manufacturing
• ICS: 49.025.01 - Materials for aerospace construction in general
• Technical Committee: VAR - Welding
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 09-May-2023
• Due Date: 26-Sep-2023
• Completion Date: 02-Aug-2023
• Ref Project: prEN ISO/ASTM 52943-2 - Additive manufacturing for aerospace - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc (ISO/ASTM DIS 52943‑2:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO/ASTM 52943-2:2023
01-junij-2023
Aditivna proizvodnja za letalsko in vesoljsko industrijo - Karakteristike in
zmogljivost procesa - 2. del: Nanašanje materiala z usmerjenim vnosom energije z
žico in oblokom (ISO/ASTM DIS 52943-2:2023)
Additive manufacturing for aerospace - Process characteristics and performance - Part
2: Directed energy deposition using wire and arc (ISO/ASTM DIS 52943-2:2023)
Additive Fertigung für Luft- und Raumfahrt - Prozessanforderungen und Qualifizierung -
Teil 2: Materialauftrag mit gerichteter Energieeinbringung unter Verwendung von Draht
und Lichtbogen (ISO/ASTM DIS 52943-2:2023)
Fabrication additive pour l'aérospatiale - Caractéristiques et performances du procédé -
Partie 2: Dépôt d'énergie dirigée utilisant du fil et un arc (ISO/ASTM DIS 52943-2:2023)
Ta slovenski standard je istoveten z: prEN ISO/ASTM 52943-2
ICS:
25.030 3D-tiskanje Additive manufacturing
49.025.01 Materiali za letalsko in Materials for aerospace
vesoljsko gradnjo na splošno construction in general
oSIST prEN ISO/ASTM 52943-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO/ASTM 52943-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO/ASTM 52943-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52943-2
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-04-17 2023-07-10
Additive manufacturing for aerospace — Process
characteristics and performance —
Part 2:
Directed energy deposition using wire and arc
Fabrication additive pour l'aérospatiale — Caractéristiques et performances du procédé —
Partie 2: Dépôt d'énergie dirigée utilisant du fil et un arc
ICS: 25.030
Member bodies are requested to consult relevant national interests in ISO/TC
44/SC 14 before casting their ballot to the e-Balloting application.
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/ASTM DIS 52943-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO/ASTM International 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO/ASTM 52943-2:2023
ISO/ASTM DIS 52943-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/ASTM DIS 52943-2
ISO/TC 261 Secretariat: DIN
Voting begins on: Voting terminates on:

Additive manufacturing for aerospace — Process
characteristics and performance —
Part 2:
Directed energy deposition using wire and arc
Fabrication additive pour l'aérospatiale — Caractéristiques et performances du procédé —
Partie 2: Dépôt d'énergie dirigée utilisant du fil et un arc
ICS: 25.030
Member bodies are requested to consult relevant national interests in ISO/TC
44/SC 14 before casting their ballot to the e-Balloting application.
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
© ISO/ASTM International 2023 THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
NOT BE REFERRED TO AS AN INTERNATIONAL
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below STANDARD UNTIL PUBLISHED AS SUCH.
or ISO’s member body in the country of the requester. In the United States, such requests should be sent to ASTM International.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
ISO copyright office ASTM International
TECHNOLOGICAL, COMMERCIAL AND
CP 401 • Ch. de Blandonnet 8 100 Barr Harbor Drive, PO Box C700
USER PURPOSES, DRAFT INTERNATIONAL
CH-1214 Vernier, Geneva West Conshohocken, PA 19428-2959, USA
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
Phone: [phone] Phone: [phone]
POTENTIAL TO BECOME STANDARDS TO
Fax: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail] Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org Website: www.astm.org ISO/
...