SIST EN 62490-2:2010

ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment (IEC 62490-2:2010)

IEC 62490-2:2010 provides the ESL measuring method for the surface mount capacitors for use in electronic equipment.

ESL-Messverfahren - Teil 2: Oberflächenmontierbare Kondensatoren zur Verwendung in Geräten der Elektrotechnik und Elektronik (IEC 62490-2:2010)

Méthode de mesure de l'ESL - Partie 2: Condensateurs pour montage en surface utilisés dans les équipements électroniques (CEI 62490-2:2010)

La CEI 62490-2:2010 fournit la méthode de mesure de l'inductance série équivalente L (ESL) destinée aux condensateurs pour montage en surface utilisés dans les équipements électroniques.

Merilna metoda ESL - 2. del: Kondenzatorji za površinsko montažo v elektronski opremi (IEC 62490-2:2010)

General Information

• Status: Published
• Publication Date: 06-Oct-2010
• ICS: 31.060.01 - Capacitors in general
• Technical Committee: I11 - Imaginarni 11
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 08-Sep-2010
• Due Date: 13-Nov-2010
• Completion Date: 07-Oct-2010
• Ref Project: EN 62490-2:2010 - ESL measuring method - Part 2: Surface mount capacitors for use in electronic equipment

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62490-2:2010
01-november-2010
Merilna metoda ESL - 2. del: Kondenzatorji za površinsko montažo v elektronski
opremi (IEC 62490-2:2010)
ESL measuring method - Part 2: Surface mount capacitors for use in electronic
equipment (IEC 62490-2:2010)
ESL-Messverfahren - Teil 2: Oberflächenmontierbare Kondensatoren zur Verwendung in
Geräten der Elektrotechnik und Elektronik (IEC 62490-2:2010)
Méthode de mesure de l'ESL - Partie 2: Condensateurs pour montage en surface utilisés
dans les équipements électroniques (CEI 62490-2:2010)
Ta slovenski standard je istoveten z: EN 62490-2:2010
ICS:
31.060.01 Kondenzatorji na splošno Capacitors in general
SIST EN 62490-2:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62490-2:2010

---------------------- Page: 2 ----------------------

SIST EN 62490-2:2010

EUROPEAN STANDARD
EN 62490-2

NORME EUROPÉENNE
September 2010
EUROPÄISCHE NORM

ICS 31.060.01


English version


ESL measuring method -
Part 2: Surface mount capacitors for use in electronic equipment
(IEC 62490-2:2010)


Méthode de mesure de l'ESL -  ESL-Messverfahren -
Partie 2: Condensateurs pour montage Teil 2: Oberflächenmontierbare
en surface utilisés dans les équipements Kondensatoren zur Verwendung
électroniques in Geräten der Elektrotechnik
(CEI 62490-2:2010) und Elektronik
(IEC 62490-2:2010)




This European Standard was approved by CENELEC on 2010-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62490-2:2010 E

---------------------- Page: 3 ----------------------

SIST EN 62490-2:2010
EN 62490-2:2010 - 2 -
Foreword
The text of document 40/2045/FDIS, future edition 1 of IEC 60490-2, prepared by IEC TC 40, Capacitors
and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62490-2 on 2010-09-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-06-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-09-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62490-2:2010 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 62490-2:2010
- 3 - EN 62490-2:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 60384-1 2008 Fixed capacitors for use in electronic EN 60384-1 2009
equipment -
Part 1: Generic specification

---------------------- Page: 5 ----------------------

SIST EN 62490-2:2010

---------------------- Page: 6 ----------------------

SIST EN 62490-2:2010

IEC 62490-2
®
Edition 1.0 2010-07
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside


ESL measuring method –
Part 2: Surface mount capacitors for use in electronic equipment

Méthode de mesure de l’ESL –
Partie 2: Condensateurs pour montage en surface utilisés dans les équipements
électroniques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
N
CODE PRIX
ICS 31.060.01 ISBN 978-2-88912-069-7
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 62490-2:2010
– 2 – 62490-2 © IEC:2010
CONTENTS
FOREWORD.3
1 Scope.5
2 Normative references .5
3 Terms and definitions .6
4 Test fixture and compensation chip .6
4.1 Test fixture .6
4.2 The open, short, and load compensation chip.9
4.2.1 The open compensation chip .9
4.2.2 The load compensation chip .9
4.2.3 The short compensation chip .9
5 Measuring method.10
5.1 Measuring equipment .10
5.2 Measurement conditions.10
5.3 Measurement points .10
5.4 Frequency and signal level.10
5.5 Measurement procedure.11
5.5.1 General .11
5.5.2 Open compensation.11
5.5.3 Load compensation .11
5.5.4 Short compensation.12
5.5.5 ESL measurement .13
6 Items to be indicated in the test result report .13
Annex A (informative) Theoretical ESL value of the short compensation chip.14

Figure 1 – Lead frame and thin coating types of surface mount capacitors and the
specification of the dimensions (L, W, and H).5
Figure 2 – Surface mount capacitors with face down terminal .5
Figure 3 – Test fixture and terminals of test fixture .6
Figure 4 – Connection diagram .7
Figure 5 – Sectional view of the test fixture with an inserted surface mount capacitor
pressured to the terminals of the test fixture .8
Figure 6 – Example of surface mount capacitor mounted on terminals of test fixture .8
Figure 7 – Front view of mounting position of objects on test fixture.9
Figure 8 – Measurement points.10
Figure 9 – Open compensation-chip position.11
Figure 10 – Load compensation-chip position .12
Figure 11 – Short compensation-chip position.12
Figure A.1 – Points of contact of the short compensation chip and terminals of test
fixture .15

Table A.1 – The calculation results of inductance of the short compensation chip.14

---------------------- Page: 8 ----------------------

SIST EN 62490-2:2010
62490-2 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ESL MEASURING METHOD –

Part 2: Surface mount capacitors
for use in electronic equipment


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62490-2 has been prepared by IEC technical committee 40:
Capacitors and resistors for electronic equipment.
The text of this standard is based on the following documents:
FDIS Report on voting
40/2045/FDIS 40/2057/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN 62490-2:2010
– 4 – 62490-2 © IEC:2010
A list of all the parts in the IEC 62490 series, under the general title ESL measuring method,
can be found on the IEC web site.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful f
...