SIST EN 13260:2009/kFprA1:2010

Railway applications - Wheelsets and bogies - Wheelsets - Product requirements

This European Standard specifies the characteristics of new wheelsets for use on European networks:
This standard is applicable to wheelsets comprising elements that conform to the following European
Standards:
- EN 13262 for wheels;
- EN 13261 for axles;
This standard is not fully applicable to wheelsets undergoing maintenance.
Some characteristics are given as a function of a category 1 or of a category 2. Category 2 can be divided
into sub-categories (2a and 2b) to specify certain characteristics. Category 1 is generally chosen when the
operating speed exceeds 200 km/h. The wheelset then comprises wheels and axle of category 1 as specified
in EN 13262 for the wheels and EN 13261 for the axles.

Bahnanwendungen - Radsätze und Drehgestelle - Radsätze - Produktanforderungen

Applications ferroviaires - Essieux montés et bogies - Essieux montés - Prescriptions pour le produit

Železniške naprave - Kolesne dvojice in podstavni vozički - Kolesne dvojice - Zahtevane lastnosti proizvoda - Dopolnilo A1

General Information

• Status: Not Published
• Public Enquiry End Date: 31-Jul-2010
• ICS: 45.040 - Materials and components for railway engineering
• Technical Committee: IŽNP - Reilway applications
• Current Stage: 98 - Abandoned project (Adopted Project)
• Start Date: 28-Jan-2014
• Due Date: 02-Feb-2014
• Completion Date: 28-Jan-2014
• Directive: 2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
• Mandate: M/275 - Mandate to CEN/CENELEC/ETSI for standardization in the field of railway equipment on the interoperability of the Trans-European high-speed rail system
• Mandate: M/334 - Mandate for programming and standardisation addressed to CEN, CENELEC and ETSI in the field of the Interoperability of the trans-european conventional rail system
• Ref Project: EN 13260:2009/FprA1 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements

Relations

• Revised: SIST EN 13260:2009 - Railway applications - Wheelsets and bogies - Wheelsets - Products requirements
• Effective Date: 12-Dec-2009
• Consolidated By: SIST EN 13260:2009+A1:2010 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
• Effective Date: 18-Jan-2023
• Consolidated By: SIST EN 13260:2009+A1:2010 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
• Effective Date: 19-Jan-2023
• Consolidated By: SIST EN 13260:2009+A1:2010 - Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
• Effective Date: 01-Dec-2010

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13260:2009/kFprA1:2010
01-julij-2010
äHOH]QLãNHQDSUDYH.ROHVQHGYRMLFHLQSRGVWDYQLYR]LþNL.ROHVQHGYRMLFH
=DKWHYDQHODVWQRVWLSURL]YRGD'RSROQLOR$
Railway applications - Wheelsets and bogies - Wheelsets - Product requirements
Bahnanwendungen - Radsätze und Drehgestelle - Radsätze - Produktanforderungen
Applications ferroviaires - Essieux montés et bogies - Essieux montés - Prescriptions
pour le produit
Ta slovenski standard je istoveten z: EN 13260:2009/FprA1
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 13260:2009/kFprA1:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13260:2009/kFprA1:2010

---------------------- Page: 2 ----------------------

SIST EN 13260:2009/kFprA1:2010


EUROPEAN STANDARD
FINAL DRAFT
EN 13260:2009
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
May 2010
ICS 45.040
English Version
Railway applications - Wheelsets and bogies - Wheelsets -
Product requirements
Applications ferroviaires - Essieux montés et bogies - Bahnanwendungen - Radsätze und Drehgestelle -
Essieux montés - Prescriptions pour le produit Radsätze - Produktanforderungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 256.

This draft amendment A1, if approved, will modify the European Standard EN 13260:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13260:2009/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13260:2009/kFprA1:2010
EN 13260:2009/prA1:2010 (E)
Contents Page
Foreword.3
1 Amendment of the Foreword.4
2 Amendment of Annex ZA.4
3 Deletion of Annex ZB .7

2

---------------------- Page: 4 ----------------------

SIST EN 13260:2009/kFprA1:2010
EN 13260:2009/prA1:2010 (E)
Foreword
This document (EN 13260:2009/prA1:2010) has been prepared by Technical Committee CEN/TC 256
“Railway applications”, the secretariat of which is held by DIN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive 2008/57/EC.
For relationship with the EU Directive, see informative Annex ZA, which is an integral part of this document.
3

---------------------- Page: 5 ----------------------

SIST EN 13260:2009/kFprA1:2010
EN 13260:2009/prA1:2010 (E)

1 Amendment of the Foreword
th
Delete the 5 paragraph of the Foreword and replace with:
"This document has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission and the European Free Trade Association, and supports essential requirements of EU Directive
2008/57/EC."
th
Delete the 6 paragraph and replace with:
"For relationship with EU Directive 2008/57/EC, see informative Annex ZA, which is an integral part of this
document."

2 Amendment of Annex ZA
Replace Annex ZA with the following Annex ZA:
"
Annex ZA
(informative)

Relationship between this European Standard and the Essential Requirements of
EU Directive 2008/57/EC
This European Standard has been prepared under a mandate given to CEN/CENELEC/ETSI by the European
Commission to provide a means of conforming to Essential Requirements of the New Approach Directive
1
2008/57/EC .
Once this standard is cited in the Official Journal of the European Union under that Directive and has been
implemented as a national standard in at least one Member State, compliance with the clauses of this
standard given in Table ZA.1 for High Speed Rolling Stock, Table ZA.2 for Freight Wagons and Table ZA.3 for
Locomotives and Passenger Rolling Stock, co
...