SIST EN 3048:2004

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads

This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self- lubricating liner, light series, for elevated load at ambient temperature, with or without swaging groove, intended for use in the fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range - 55 °C to + 163 °C.

Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung - Leichte Reihe - Hohe Belastung bei Raumtemperatur - Maße und Belastungen

Diese Norm legt die Eigenschaften von Gelenklagern aus korrosionsbeständigem Stahl mit selbstschmierender Beschichtung, schmale Reihe, für hohe Belastung bei Raumtemperatur, mit oder ohne Montagenut fest, die für die starren oder beweglichen Flugwerkteile und deren Betätigungsmechanismen bestimmt sind.
Sie sind im Temperaturbereich von - 55 °C bis + 163 °C zu verwenden.

Série aérospatiale - Rotules en acier résistant a la corrosion a garniture autolubrifiante - Série légere a charge élevée a température ambiante - Dimensions et charges

La présente norme spécifie les caractéristiques des rotules en acier résistant a la corrosion, a garniture autolubrifiante, série légere, a charge élevée a température ambiante, avec ou sans gorge de sertissage, destinées a etre utilisées dans les éléments fixes ou mobiles de la structure des aéronefs et de leurs mécanismes de commande.
Elles doivent etre utilisées dans l'intervalle de température de - 55 °C a + 163 °C.

Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads

General Information

• Status: Published
• Publication Date: 30-Apr-2004
• ICS: 49.035 - Components for aerospace construction
• Technical Committee: I08 - Imaginarni 08
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-May-2004
• Due Date: 01-May-2004
• Completion Date: 01-May-2004
• Ref Project: EN 3048:2001 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and loads

Relations

• Replaces: SIST EN 3048:2001 - Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-lubricating liner - Light series - Elevated loads at ambient temperature - Dimensions and loads
• Effective Date: 01-Sep-2004

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 3048:2004
01-maj-2004
1DGRPHãþD
SIST EN 3048:2001
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-
lubricating liner - Light series - Elevated load at ambient temperature - Dimensions
and loads
Aerospace series - Bearings, spherical plain in corrosion resisting steel with self-
lubricating liner - Light series - Elevated load at ambient temperature - Dimensions and
loads
Luft- und Raumfahrt - Gelenklager aus korrosionsbeständigem Stahl mit
selbstschmierender

Beschichtung - Leichte Reihe - Hohe Belastung bei Raumtemperatur - Maße und
Belastungen
Série aérospatiale - Rotules en acier résistant a la corrosion a garniture autolubrifiante -

Série légere a charge élevée a température ambiante - Dimensions et charges
Ta slovenski standard je istoveten z: EN 3048:2001
ICS:
49.035 Sestavni deli za letalsko in Components for aerospace
vesoljsko gradnjo construction
SIST EN 3048:2004 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 3048:2004

---------------------- Page: 2 ----------------------

SIST EN 3048:2004
EUROPEAN STANDARD
EN 3048
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 49.035 Supersedes EN 3048:1992
English version
Aerospace series - Bearings, spherical plain in corrosion
resisting steel with self-lubricating liner - Light series - Elevated
load at ambient temperature - Dimensions and loads
Série aérospatiale - Rotules en acier résistant à la Luft- und Raumfahrt - Gelenklager aus
corrosion à garniture autolubrifiante - Série légère à charge korrosionsbeständigem Stahl mit selbstschmierender
élevée à température ambiante - Dimensions et charges Beschichtung - Leichte Reihe - Hohe Belastung bei
Raumtemperatur - Maße und Belastungen
This European Standard was approved by CEN on 29 December 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3048:2001 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 3048:2004
EN 3048:2001 (E)
Foreword
This European Standard has been prepared by the European Association of Aerospace Manufacturers
(AECMA).
After inquiries and votes carried out in accordance with the rules of this Association, this Standard has
received the approval of the National Associations and the Official Services of the member countries of
AECMA, prior to its presentation to CEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2002, and conflicting national standards shall be withdrawn at
the latest by April 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark,
Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal,
Spain, Sweden, Switzerland and the United Kingdom.
2

---------------------- Page: 4 ----------------------

SIST EN 3048:2004
EN 3048:2001 (E)
1 Scope
This standard specifies the characteristics of spherical plain bearings in corrosion resisting steel, with self-
lubricating liner, light series, for elevated load at ambient temperature, with or without swaging groove,
intended for use in the fixed or moving parts of the aircraft structure and control mechanisms.
They shall be used in the temperature range – 55
C to + 163
C.
2 Normative references
This European Standard incorporates by dated or undated reference provisions from other publications.
These normative references are cited at the appropriate places in the text and the publications are listed
hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to
this European Standard only when incorporated in it by amendment or revision. For undated references the
latest edit
...