SIST EN 15595:2019
(Main)Railway applications - Braking - Wheel slide protection
Railway applications - Braking - Wheel slide protection
This European Standard specifies the criteria for system acceptance and type approval of a wheel slide protection (WSP) system. It also specifies criteria for the implementation of WSP to specific vehicle applications and specific operating conditions, as well as requirements for wheel rotation monitoring (WRM). This includes the design, testing and quality assessment of the WSP and WRM systems and their components.
This European Standard is not intended to be used to determine the stopping performance of a WSP equipped train under all environmental conditions.
Bahnanwendungen - Bremse - Gleitschutz
Diese Europäische Norm legt die Kriterien für die Systemzulassung und die Typprüfung eines Gleitschutzsystems fest. Sie legt auch die Kriterien für die Implementierung eines Gleitschutzes bei spezifischen Fahrzeuganwendungen und spezifischen Betriebsbedingungen sowie die Anforderungen an eine Rollüberwachung fest. Dies beinhaltet Ausführung, Erprobung und den Qualitätsnachweis der Gleitschutz und Rollüberwachungssysteme und ihrer Komponenten.
Es ist nicht beabsichtigt, dass diese Europäische Norm dafür genutzt wird, um die Bremsleistung eines mit Gleitschutz ausgerüsteten Zuges unter allen Umweltbedingungen festzulegen.
Applications ferroviaires - Freinage - Anti-enrayeur
Le présent document spécifie les critères pour l’acceptation du système et la qualification de type d’un système anti-enrayeur (AE). Elle définit également les critères d’intégration d’un système anti-enrayeur pour des applications véhicules spécifiques et des conditions d’exploitation spécifiques, ainsi que les exigences applicables au dispositif de surveillance de la rotation d'essieu (DNRE). Cela comprend les exigences relatives à la conception, aux essais et à l’assurance qualité des systèmes anti-enrayeur, des dispositifs de surveillance de la rotation d'essieu, et de leurs composants.
La présente Norme européenne n’est pas applicable aux véhicules montés sur pneus ou aux véhicules dotés de freins hydrauliques.
Železniške naprave - Zavore - Preprečevanje zdrsa koles
Ta evropski standard določa merila za sistemsko sprejemljivost in tipsko odobritev sistema za preprečevanje zdrsa koles (WSP). Določa tudi merila za izvajanje preprečevanja zdrsa koles za posebne železniške naprave in posebne obratovalne pogoje ter zahteve za nadzor vrtenja koles (WRM). To vključuje načrtovanje, preskušanje in oceno kakovosti sistemov za preprečevanje zdrsa koles in za nadzor vrtenja koles ter njihovih sestavnih delov.
Ta evropski standard se ne uporablja za določanje zmogljivosti zaviranja vlaka, opremljenega s sistemom za preprečevanje zdrsa koles, pri vseh okoljskih pogojih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 15595:2019
01-februar-2019
1DGRPHãþD
SIST EN 15595:2009+A1:2011
äHOH]QLãNHQDSUDYH=DYRUH3UHSUHþHYDQMH]GUVDNROHV
Railway applications - Braking - Wheel slide protection
Bahnanwendungen - Bremse - Gleitschutz
Applications ferroviaires - Freinage - Anti-enrayeur
Ta slovenski standard je istoveten z: EN 15595:2018
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
SIST EN 15595:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 15595:2019
---------------------- Page: 2 ----------------------
SIST EN 15595:2019
EN 15595
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2018
EUROPÄISCHE NORM
ICS 45.040 Supersedes EN 15595:2009+A1:2011
English Version
Railway applications - Braking - Wheel slide protection
Applications ferroviaires - Freinage - Anti-enrayeur Bahnanwendungen - Bremse - Gleitschutz
This European Standard was approved by CEN on 3 August 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15595:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 15595:2019
EN 15595:2018 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 Symbols and abbreviations . 12
5 Requirements . 12
5.1 Functional requirements. 12
5.1.1 Objectives of wheel slide protection . 12
5.1.2 General functional requirements . 13
5.1.3 Control of the brake force . 13
5.1.4 Wheel slide protection watchdog (safety timer) . 14
5.1.5 Air supply . 14
5.1.6 Wheel diameter differences . 14
5.1.7 Wheel rotation monitoring (WRM) .
...
SLOVENSKI STANDARD
oSIST prEN 15595:2015
01-december-2015
äHOH]QLãNHQDSUDYH=DYRUH3UHSUHþHYDQMH]GUVDNROHV
Railway applications - Braking - Wheel slide protection
Bahnanwendungen - Bremse - Gleitschutz
Ta slovenski standard je istoveten z: prEN 15595
ICS:
45.040 Materiali in deli za železniško Materials and components
tehniko for railway engineering
oSIST prEN 15595:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15595:2015
---------------------- Page: 2 ----------------------
oSIST prEN 15595:2015
DRAFT
EUROPEAN STANDARD
prEN 15595
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2015
ICS 45.040 Will supersede EN 15595:2009+A1:2011
English Version
Railway applications - Braking - Wheel slide protection
Bahnanwendungen - Bremse - Gleitschutz
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 256.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15595:2015 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15595:2015
prEN 15595:2015 (E)
Contents Page
European foreword . 6
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Symbols and abbreviations . 12
5 Requirements . 12
5.1 Functional requirements. 12
5.1.1 Objectives WSP . 12
5.1.2 General functional requirements . 13
5.1.3 Control of the brake force . 13
5.1.4 WSP watchdog (safety timer) . 13
5.1.5 Air supply . 14
5.1.6 Wheel diameter differences .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.