SIST EN IEC 60966-4:2024
(Main)Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:2024)
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies (IEC 60966-4:2024)
IEC 60966-4:2024 is a sectional specification that relates to semi-rigid coaxial cable assemblies operating in the transverse electromagnetic mode (TEM). It specifies the design and construction, IEC type designation, workmanship, marking and packaging, standard rating and characteristics, electrical, mechanical and environmental requirements of finished semi-rigid cable assemblies, quality assessment, delivery and storage, etc.
This part of IEC 60966 applies to semi-rigid cable assemblies composed of semi-rigid coaxial cables and coaxial connectors. Semi-rigid cable assemblies are widely used in mobile communication systems, microwave test equipment, radar, aerospace and other fields.
NOTE 1 For the purpose of this sectional specification, a cable assembly is always regarded as an integral unit. All specifications apply to the finished assembly and not to individual and non-assembled parts thereof.
NOTE 2 This sectional specification can be supplemented with detail specifications giving additional details as required by the particular application. This application will not necessarily require all tests.
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für halbstarre konfektionierte Koaxialkabel (IEC 60966-4:2024)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 4: Spécification intermédiaire pour cordons coaxiaux semi-rigides (IEC 60966-4:2024)
L’IEC 60966-4:2024 est une spécification intermédiaire qui concerne les cordons coaxiaux semi-rigides qui fonctionnent en mode électromagnétique transverse (TEM). Elle spécifie la conception et la construction, la désignation de type IEC, la qualité d’exécution, le marquage et l’emballage, les valeurs assignées et les caractéristiques normales, les exigences électriques, mécaniques et environnementales des cordons semi-rigides finis, l’évaluation de la qualité, la livraison et le stockage, etc.
La présente partie de l’IEC 60966 s’applique aux cordons semi-rigides composés de câbles coaxiaux semi-rigides et de connecteurs coaxiaux. Les cordons semi-rigides sont largement utilisés dans les systèmes de communication mobile, le matériel d’essai hyperfréquences, les radars, l’aérospatial et d’autres domaines.
NOTE 1 Pour les besoins de la présente spécification intermédiaire, un cordon est toujours considéré dans son intégralité. Toutes les spécifications s’appliquent au cordon fini et non à des parties individuelles et non assemblées de celui-ci.
NOTE 2 La présente spécification intermédiaire peut être complétée par des spécifications particulières donnant des détails supplémentaires comme l’exige l’application particulière. Cette application n’exigera pas obligatoirement tous les essais.
Sestavi radiofrekvenčnih in koaksialnih kablov - 4. del: Področna specifikacija za sestave poltogih koaksialnih kablov (IEC 60966-4:2024)
Standard IEC 60966-4:2024 je področna specifikacija, ki se navezuje na sestave poltogih koaksialnih kablov, ki delujejo v prečnem elektromagnetnem polju (TEM). Določa načrtovanje in izdelavo, oznako tipa IEC, izvedbo, označevanje in pakiranje, standardno oceno in lastnosti, električne, mehanske in okoljske zahteve končnih sestavov poltogih kablov, oceno kakovosti, dobavo in shranjevanje itd.
Ta del standarda IEC 60966 se uporablja za sestave poltogih kablov, ki so sestavljeni iz poltogih koaksialnih kablov in koaksialnih konektorjev. Sestavi poltogih kablov se pogosto uporabljajo v mobilnih komunikacijskih sistemih, opremi za preskušanje mikrovalov, radarjih, v aeronavtiki in na drugih področjih.
OPOMBA 1: Za namene te področne specifikacije je sestav kablov vedno integralna enota. Vse specifikacije se uporabljajo za končne sestave in ne za njihove posamezne ali nesestavljene dele.
OPOMBA 2: To področno specifikacijo je mogoče dopolniti s podrobnimi specifikacijami z dodatnimi informacijami, kot to zahteva določena vrsta uporabe. Ta vrsta uporabe morda ne bo zahtevala vseh preskusov.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Sestavi radiofrekvenčnih in koaksialnih kablov - 4. del: Področna specifikacija za
sestave poltogih koaksialnih kablov (IEC 60966-4:2024)
Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-
rigid coaxial cable assemblies (IEC 60966-4:2024)
Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4: Rahmenspezifikation für
halbstarre konfektionierte Koaxialkabel (IEC 60966-4:2024)
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 4: Spécification
intermédiaire pour cordons coaxiaux semi-rigides (IEC 60966-4:2024)
Ta slovenski standard je istoveten z: EN IEC 60966-4:2024
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 60966-4
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2024
ICS 33.120.10 Supersedes EN 60966-4:2003
English Version
Radio frequency and coaxial cable assemblies - Part 4:
Sectional specification for semi-rigid coaxial cable assemblies
(IEC 60966-4:2024)
Cordons coaxiaux et cordons pour fréquences Konfektionierte Koaxial- und Hochfrequenzkabel - Teil 4:
radioélectriques - Partie 4 : Spécification intermédiaire pour Rahmenspezifikation für halbstarre konfektionierte
cordons coaxiaux semi-rigides Koaxialkabel
(IEC 60966-4:2024) (IEC 60966-4:2024)
This European Standard was approved by CENELEC on 2024-04-16. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60966-4:2024 E
European foreword
The text of document 46/964/FDIS, future edition 3 of IEC 60966-4, prepared by IEC/TC 46 "Cables,
wires, waveguides, RF connectors, RF and microwave passive components and accessories" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60966-4:2024.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-16
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-16
document have to be withdrawn
This document supersedes EN 60966-4:2003 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60966-4:2024 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-1 2013 Environmental testing - Part 1: General EN 60068-1 2014
and guidance
IEC 60966-1 2019 Radio frequency and coaxial cable EN IEC 60966-1 2019
assemblies - Part 1: Generic specification -
General requirements and test methods
IEC 61169 series Radio-frequency connectors EN IEC 61169 series
IEC 61196-1-126 - Coaxial communication cables - Part 1- - -
126: Electrical test methods - Corona
extinction voltage
IEC 61196-10 - Coaxial communication cables - Part 10: EN 61196-10 -
Sectional specification for semi-rigid cables
with fluoropolymer dielectric
IEC 61196-11 - Coaxial communication cables - Part 11: - -
Sectional specification for semi-rigid cables
with polyethylene (PE) dielectric
IEC 60966-4 ®
Edition 3.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Radio frequency and coaxial cable assemblies –
Part 4: Sectional specification for semi-rigid coaxial cable assemblies
Cordons coaxiaux et cordons pour fréquences radioélectriques –
Partie 4 : Spécification intermédiaire pour cordons coaxiaux semi-rigides
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.10 ISBN 978-2-8322-8408-7
– 2 – IEC 60966-4:2024 © IEC 2024
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Design and construction . 7
4.1 Cable design and construction . 7
4.2 Connector design and construction . 7
4.3 The relative position dimensions of the interface . 7
4.4 Outline of the cable assembly . 7
5 Workmanship, marking and packaging . 8
6 IEC type designation . 9
7 Rating and characteristics . 10
7.1 Nominal characteristic impedance . 10
7.2 Temperature range . 10
8 Requirements of finished cable assemblies . 10
8.1 General . 10
8.2 Electrical requirements . 10
8.3 Mechanical requirements . 12
8.4 Environmental requirements . 14
9 Quality management . 16
10 Test schedules . 16
10.1 Qualification test . 16
10.2 Acceptance tests . 17
10.3 Periodic tests . 18
Annex A (normative) The relative position dimensions of the interface of some typical
connectors . 20
Annex B (normative) Preferred arrangement for vibrations, shocks test . 23
Figure 1 – Length definition of cable assemblies with two connectors . 8
Figure 2 – Length definition of cable assemblies with one connector . 8
Figure 3 – The marking example of a cable assembly . 9
Figure A.1 – The relative position dimensions of the interface of some typical
connectors . 21
Figure B.1 – Preferred arrangement for vibrations, shocks test . 23
Table 1 – Rated temperature of cable assemblies with semi-rigid cables with
polyethylene dielectric (IEC 61196-11) . 10
Table 2 – Rated temperature of cable assemblies with semi-rigid cables with
fluoropolymer dielectric (IEC 61196-10) . 10
Table 3 – Electrical requirements . 11
Table 4 – Mechanical requirements. 12
Table 5 – Environmental requirements . 14
Table 6 – Qualification test . 16
Table 7 – Acceptance test . 18
IEC 60966-4:2024 © IEC 2024 – 3 –
Table 8 – Sampling plan of group B . 18
Table 9 – Periodic test . 19
Table A.1 – The dimensions of A and B in Figure A.1 . 22
– 4 – IEC 60966-4:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 4: Sectional specification for semi-rigid coaxial cable assemblies
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximu
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.