iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 13128:2002/kprA2:2008

(Amendment)

Safety of machine tools - Milling machines (including boring machines)

Safety of machine tools - Milling machines (including boring machines)

Sicherheit von Werkzeugmaschinen - Fräs- und Bohr-Fräsmaschinen

Sécurité des machines-outils - Fraiseuses (comprenent les aléseuses)

Varnost obdelovalnih strojev - Frezalni stroji (vključno z vrtalnimi stroji)

General Information

Status
Not Published
Public Enquiry End Date
31-Dec-2008
ICS
25.080.20 - Boring and milling machines
Technical Committee
I13 - Imaginarni 13
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
14-Oct-2019
Due Date
19-Oct-2019
Completion Date
14-Oct-2019
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
Ref Project
EN 13128:2001/prA2 - Safety of machine tools - Milling machines (including boring machines)

Relations

Consolidated By
SIST EN 13128:2002+A2:2009 - Safety of machine tools - Milling machines (including boring machines)
Effective Date
18-Jan-2023
Revised
SIST EN 13128:2002 - Safety of machine tools - Milling machines (including boring machines)
Effective Date
01-Dec-2008
Consolidated By
SIST EN 13128:2002+A2:2009 - Safety of machine tools - Milling machines (including boring machines)
Effective Date
19-Jan-2023
Consolidated By
SIST EN 13128:2002+A2:2009 - Safety of machine tools - Milling machines (including boring machines)
Effective Date
01-Jun-2009

Buy Standard

EN 13128:2002/kprA2:2008EN 13128:2002/kprA2:2008
PreviousNext
Draft
EN 13128:2002/kprA2:2008
English language
6 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13128:2002/kprA2:2008
01-december-2008
9DUQRVWREGHORYDOQLKVWURMHY)UH]DOQLVWURML YNOMXþQR]YUWDOQLPLVWURML
Safety of machine tools - Milling machines (including boring machines)
Sicherheit von Werkzeugmaschinen - Fräs- und Bohr-Fräsmaschinen
Sécurité des machines-outils - Fraiseuses (comprenent les aléseuses)
Ta slovenski standard je istoveten z: EN 13128:2001/prA2
ICS:
25.080.20 Frezalniki Boring and milling machines
SIST EN 13128:2002/kprA2:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13128:2002/kprA2:2008

---------------------- Page: 2 ----------------------

SIST EN 13128:2002/kprA2:2008
EUROPEAN STANDARD
FINAL DRAFT
EN 13128:2001
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
October 2008
ICS 25.080.20

English Version
Safety of machine tools - Milling machines (including boring
machines)
Sécurité des machines-outils - Fraiseuses (comprenent les Sicherheit von Werkzeugmaschinen - Fräs- und Bohr-
aléseuses) Fräsmaschinen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 143.
This draft amendment A2, if approved, will modify the European Standard EN 13128:2001. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13128:2001/prA2:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13128:2002/kprA2:2008
EN 13128:2001/prA2:2008 (E)
Contents Page
Foreword.3
1 Modification to 7.2 Instruction handbook .4
2 Modification to 7.3 Noise declaration .4
3 Modifications to 7.4 Marking .4
4 Modification to Annex ZA .5
5 Addition of Annex ZB .6

2

---------------------- Page: 4 ----------------------

SIST EN 13128:2002/kprA2:2008
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 16564:2021(Main)
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
EN 16564:2020

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document also applies to machines fitted with the following facilities/devices:
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
-   automatic tool change;
-   loading and unloading conveyor system;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   tilting workpiece support(s) when loading;
-   lathe unit;
-   undercut grooving unit;
-   axes operating in accordance with an NC work programme.
This document does not apply to:
-   machines intended for operation in a potentially explosive atmosphere;
-   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation;
-   machines which are manufactured before the date of their publication as EN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16090-1:2023(Main)
Machine tools safety - Machining centres, milling machines, transfer machines - Part 1: Safety requirements (ISO 16090-1:2022)
EN ISO 16090-1:2022

This document specifies the technical safety requirements and protective measures for the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of:
—    milling machines (see 3.1.1), including machines capable of performing boring operations (see 3.1.2);
—    machining centres; and
—    transfer machines (see 3.1.3)
designed for continuous production use, which are intended to cut cold metal and other non-combustible cold materials, except wood or materials with physical characteristics similar to those of wood as defined in ISO 19085‑1 and glass, stone and engineered/agglomerated materials as defined in EN 14618.
This document covers the following machines (referred to as "machines" in this document):
a)    manually, without numerical control, operated boring and milling machines (see 3.2.1, Group 1), e.g. knee and column type milling machines (see Figures C.1 and C.2);
b)    manually, with limited numerical control, operated boring and milling machines (see 3.2.2, Group 2), e.g. profile and contouring milling machines (see Figures C.3 and C.4);
c)     numerically controlled milling machines and machining centres (see 3.2.3, Group 3), e.g. automatic milling machines and milling centres, e.g. multi-spindle milling machines, gear-milling machines (see Figures C.5 to C.7);
d)    transfer and special-purpose machines (see 3.2.4, Group 4), which are designed to process only pre-specified workpieces or limited range of similar workpieces by means of a predetermined sequence of machining operations and process parameters (see Figures C.8 to C.13).
e)    machines fitted with the following devices/facilities, whose hazards have been dealt with:
—    tool magazine(s);
—    tool changer(s);
—    workpiece handling mechanism(s);
—    powered workpiece clamping mechanism(s);
—    swarf/chip conveyor(s);
—    power-operated door(s);
—    moveable operator cabin(s);
—    additional equipment for turning;
—    additional equipment for grinding.
This document deals with all significant hazards, hazardous situations and events relevant to this type of machinery which can occur during transportation, assembly and installation, setting, operation, cleaning and maintenance, troubleshooting, dismantling or disabling according to ISO 12100, when the machinery is used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document presumes accessibility to the machine from all directions and specifies access conditions to operator positions. It also applies to workpiece transfer devices including transport devices for loading/unloading when they form an integral part of the machine.

  • Standard
    164 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    151 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-1:2018/A12:2022(Amendment)
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-1: Particular requirements for hand-held drills and impact drills
EN 62841-2-1:2018/A12:2022

This part of IEC 62841 applies to hand-held drills and impact drills, including diamond core drills. This standard also applies to drills that can be used for driving screws by attaching screwdriver bits.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 19085-14:2022(Main)
Woodworking machines - Safety - Part 14: Four-sided moulding machines (ISO 19085-14:2021)
EN ISO 19085-14:2021

This part of ISO 19085 gives the safety requirements and measures for stationary four sided moulding machines with a maximum working width of 350 mm and a maximum speed of the integrated workpiece feed of 200 m/min, with electrical and/or electronic control system, hereinafter referred to as “machines” designed to cut solid wood and materials with similar physical characteristics to wood (see ISO 19085-1:2017, 3.2).
It deals with all significant hazards, hazardous situations and events as listed in Clause 4 relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling,
disabling and scrapping phases are taken into account.
NOTE: For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010.
It is also applicable to machines fitted with one or more of the following devices / additional working units, whose hazards have been dealt with:
- universal spindle;
- glass bead saw unit
- fixed or movable work-piece support;
- quick tool changing system
- laser marking unit
- automatic work-piece returner
- in-feed hopper
- in-feed loading table
This part of ISO 19085 does not deal with any hazards related to:
a) in-feed devices other than in-feed hopper and in-feed loading table (magazines, etc.);
NOTE: For mechanical in-feed devices which also prevent access to the in-feed opening, see 6.6.4.
b) out-feed devices (e.g. mechanical handling systems) except for hazards related to ejection from the machine due to climb cutting
c) single machine being used in combination with any other machine (as part of a line);
It is not applicable to machines intended for use in potentially explosive atmosphere and to machines manufactured prior to its publication.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 16564:2021(Main)
Machines and plants for mining and tooling of natural stone - Safety - Requirements for bridge type sawing/milling machines, included numerical control (NC/CNC) versions
EN 16564:2020

This document deals with all significant hazards, hazardous situations and events which are relevant to:
-   bridge sawing machines;
-   bridge sawing and milling machines;
-   numerical control bridge sawing/milling machines.
These machines are designed to saw and mill natural stone and engineered/agglomerated stone as defined by EN 14618:2009, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This document specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards.
This document deals with the foreseeable lifetime of the machinery including the phases of transport, assembly, dismantling, disabling and scrapping.
This document also applies to machines fitted with the following facilities/devices:
-   mechanical, pneumatic, hydraulic or vacuum workpiece clamping;
-   automatic tool change;
-   loading and unloading conveyor system;
-   tilting and/or rotating head axis;
-   rotating workpiece support(s);
-   tilting workpiece support(s) when loading;
-   lathe unit;
-   undercut grooving unit;
-   axes operating in accordance with an NC work programme.
This document does not apply to:
-   machines intended for operation in a potentially explosive atmosphere;
-   machines operating in severe environmental conditions (e.g. extreme temperatures, corrosive environment);
-   machines intended for outdoor operation;
-   machines which are manufactured before the date of their publication as EN.

  • Standard
    62 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 62841-2-17:2018(Main)
Electric Motor-Operated Hand-Held Tools, Transportable Tools and Lawn and Garden Machinery - Safety - Part 2-17: Particular requirements for hand-held routers (IEC 62841-2-17:2017)
EN 62841-2-17:2017

SIST EN 62841-2-17 applies to hand-held routers intended for cutting slots into or shaping the edge of wood and analogous materials, plastics and non-ferrous metals except magnesium.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 61029-2-8:2010
Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders (IEC 61029-2-8:1995, modified + A1:1999 + A2:2001)
EN 61029-2-8:2010

This clause of part 1 is applicable except as follows:
1.1 Addition:
This European Standard applies to transportable single spindle vertical moulders, with a maximum cutter block diameter of 200 mm maximum, designed to cut wood and analogue materials also covered with plastic laminate or edgings by hand-feed operation. Single spindle vertical moulders other than transportable are covered by EN 848-1:1998.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN ISO 19085-6:2021(Main)
Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO/DIS 19085-6:2021)
prEN ISO 19085-6

DOW = DAV + 24

  • Draft
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day