iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST-TS CEN ISO/TS 17892-10:2004/AC:2010

(Corrigendum)

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

AFNOR - Modification to French title

Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 10: Direkte Scherversuche (ISO/TS 17892-10:2004)

Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 10: Essais de cisaillement direct (ISO/TS 17892-10:2004)

Geotehnično preiskovanje in preskušanje - Laboratorijsko preskušanje zemljin - 10. del: Neposredni strižni preskus (ISO/TS 17892-10:2004)

Ta dokument določa laboratorijske preskusne metode za ugotavljanje parametra efektivne strižne trdnosti za zemljine v okviru geotehničnih preiskav v skladu s prEN 1997-1 in -2. Preskusna metoda je sestavljena iz namestitve preskusnega vzorca v neposredni strižni pripomoček, vnosa vnaprej določene normalne napetosti, zagotavljanja drenaže (in po potrebi močenja) preskusnega vzorca ali obojega, utrditve vzorca pod normalno napetostjo, odklepanja okvira, ki drži vzorec, in premikanja enega okvira v vodoravni smeri glede na drugega s stalno hitrostjo strižne deformacije ter merjenja strižne sile in vodoravne premestitve ob striženju vzorca.  Striženje poteka dovolj počasi, da odvečni porni tlak izginja z drenažo in da so efektivne napetosti enake skupnim napetostim. Neposredni strižni preskusi se uporabljajo pri zemeljskih delih in temeljenju za določevanje efektivne strižne trdnosti zemljin.

General Information

Status
Withdrawn
Publication Date
07-Mar-2010
Withdrawal Date
12-Feb-2019
ICS
13.080.20 - Physical properties of soils
93.020 - Earthworks. Excavations. Foundation construction. Underground works
Technical Committee
KON.007 - Geotechnics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
12-Feb-2019
Due Date
07-Mar-2019
Completion Date
13-Feb-2019
Ref Project
CEN ISO/TS 17892-10:2004/AC:2005 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)

Relations

Corrects
SIST-TS CEN ISO/TS 17892-10:2004 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)
Effective Date
01-Apr-2010
Replaced By
SIST EN ISO 17892-10:2019 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
Effective Date
01-Mar-2019
Corrects
SIST-TS CEN ISO/TS 17892-10:2004 - Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)
Effective Date
08-Jun-2022

Buy Standard

TS CEN ISO/TS 17892-10:2004/AC:2010TS CEN ISO/TS 17892-10:2004/AC:2010
PreviousNext
Corrigendum
TS CEN ISO/TS 17892-10:2004/AC:2010
French language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geotechnische Erkundung und Untersuchung - Laborversuche an Bodenproben - Teil 10: Direkte Scherversuche (ISO/TS 17892-10:2004)Reconnaissance et essais géotechniques - Essais de laboratoire sur les sols - Partie 10: Essais de cisaillement direct (ISO/TS 17892-10:2004)Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO/TS 17892-10:2004)93.020Zemeljska dela. Izkopavanja. Gradnja temeljev. Dela pod zemljoEarthworks. Excavations. Foundation construction. Underground works13.080.20Fizikalne lastnosti talPhysical properties of soilsICS:Ta slovenski standard je istoveten z:CEN ISO/TS 17892-10:2004/AC:2005SIST-TS CEN ISO/TS 17892-10:2004/AC:2010fr01-april-2010SIST-TS CEN ISO/TS 17892-10:2004/AC:2010SLOVENSKI
STANDARD



SIST-TS CEN ISO/TS 17892-10:2004/AC:2010



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMCEN ISO/TS 17892-10:2004/ACDecember 2005Décembre 2005Dezember 2005ICS 13.080.20; 93.020English versionVersion FrançaiseDeutsche FassungGeotechnical investigation and testing - Laboratory testing of soil - Part 10:Direct shear tests (ISO/TS 17892-10:2004)Reconnaissance et essais géotechniques -Essais de laboratoire sur les sols - Partie10: Essais de cisaillement direct (ISO/TS17892-10:2004)Geotec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 17892-12:2018/A1:2021(Amendment)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits - Amendment 1 (ISO 17892-12:2018/Amd 1:2021)
EN ISO 17892-12:2018/A1:2021

This document specifies methods for the determination of the liquid and plastic limits of a soil. These comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of a specimen of soil from which material larger than about 0,4 mm has been removed. This document describes two methods: the fall cone method and the Casagrande method.
NOTE The fall cone method in this document should not be confused with that of ISO 17892‑6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and that some variability in results will occur.

  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    4 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18674-4:2020(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 4: Measurement of pore water pressure: Piezometers (ISO 18674-4:2020)
EN ISO 18674-4:2020

This standard forms part 4 of the series ISO 18674, as described in ISO 18674-1: Part 1. General rules the methods and gives rules for measurement of pore water pressures in geotechnical engineering or more general in foundation engineering. Pore pressures are needed to obtain effective stresses and play a key role in the analysis of engineered construction in and on ground.

  • Standard
    65 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18674-5:2019(Main)
Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - Part 5: Stress change measurements by total pressure cells (TPC) (ISO 18674-5:2019)
EN ISO 18674-5:2019

This standard forms part 5 of the series ISO 18674, as described in ISO 18674-1: Part 1. General rules the methods and gives rules for measurement of total stresses  in geotechnical engineering or more general in foundation engineering. Stresses in soil or rock  are needed to judge the loading of engineered construction in the ground.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-11:2019(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 11: Permeability tests (ISO 17892-11:2019)
EN ISO 17892-11:2019

This document specifies methods for the laboratory determination of the water flow characteristics
in soil.
This document is applicable to the laboratory determination of the coefficient of permeability of soil
within the scope of geotechnical investigations.
NOTE This document fulfils the requirements of the determination of the coefficient of permeability of soils
in the laboratory for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-10:2019(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 10: Direct shear tests (ISO 17892-10:2018)
EN ISO 17892-10:2018

This document specifies two laboratory test methods for the determination of the effective shear
strength of soils under consolidated drained conditions using either a shearbox or a ring shear device.
This document is applicable to the laboratory determination of effective shear strength parameters for
soils in direct shear within the scope of geotechnical investigations.
The tests included in this document are for undisturbed, remoulded, re-compacted or reconstituted
soils. The procedure describes the requirements of a determination of the shear resistance of a
specimen under a single vertical (normal) stress. Generally three or more similar specimens from
one soil are prepared for shearing under three or more different vertical pressures to allow the shear
strength parameters to be determined in accordance with Annex B.
Special procedures for preparation and testing the specimen, such as staged loading and pre-shearing
or for interface tests between soils and other materials, are not covered in the procedure of this
document.
NOTE This document fulfils the requirements of the determination of the drained shear strength of soils in
direct shear for geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-12:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 12: Determination of liquid and plastic limits (ISO 17892-12:2018)
EN ISO 17892-12:2018

This document specifies methods for the determination of the liquid and plastic limits of a soil. These
comprise two of the Atterberg limits for soils.
The liquid limit is the water content at which a soil changes from the liquid to the plastic state.
This document describes the determination of the liquid limit of a specimen of natural soil, or of
a specimen of soil from which material larger than about 0,4 mm has been removed. This document
describes two methods: the fall cone method and the Casagrande method.
NOTE The fall cone method in this document should not be confused with that of ISO 17892-6.
The plastic limit of a soil is the water content at which a soil ceases to be plastic when dried further.
The determination of the plastic limit is normally made in conjunction with the determination of the
liquid limit. It is recognized that the results of the test are subject to the judgement of the operator, and
that some variability in results will occur.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-9:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO 17892-9:2018)
EN ISO 17892-9:2018

This document specifies a method for consolidated triaxial compression tests on water-saturated soils.
This document is applicable to the laboratory determination of triaxial shear strength under
compression loading within the scope of geotechnical investigations.
The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted
soil, is subjected to an isotropic or an anisotropic stress under drained conditions and thereafter is
sheared under undrained or drained conditions. The test allows the determination of shear strength,
stress-strain relationships and effective stress paths. All stresses and strains are denoted as positive
numerical values in compression.
NOTE 1 This document provides a test for a single specimen. A set of at least three relatable tests are required
to determine the shear strength parameters from these tests. Procedures for evaluating the results are included
in Annex B and, where required, the shear strength parameters are to be included in the report.
Special procedures such as:
a) tests with lubricated ends;
b) multi-stage tests;
c) tests with zero lateral strain (K0) consolidation;
d) tests with local measurement of strain or local measurement of pore pressure;
e) tests without rubber membranes;
f) extension tests;
g) shearing where cell pressure varies,
are not fully covered in this procedure. However, these specific tests can refer to general procedures
described in this document.
NOTE 2 This document fulfils the requirements of consolidated triaxial compression tests for geotechnical
investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-8:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO 17892-8:2018)
EN ISO 17892-8:2018

This document specifies a method for unconsolidated undrained triaxial compression tests.
This document is applicable to the laboratory determination of undrained triaxial shear strength under
compression loading within the scope of geotechnical investigations.
The cylindrical specimen, which can comprise undisturbed, re-compacted, remoulded or reconstituted
soil, is subjected to an isotropic stress under undrained conditions and thereafter is sheared
under undrained conditions. The test allows the determination of shear strength and stress-strain
relationships in terms of total stresses.
Non-standard procedures such as tests with the measurement of pore pressure or tests with filter
drains are not covered in this document.
NOTE This document fulfils the requirements of unconsolidated undrained triaxial compression tests for
geotechnical investigation and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-7:2018(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO 17892-7:2017)
EN ISO 17892-7:2018

This document specifies a method for the unconfined compression test.
This document is applicable to the determination of the unconfined compressive strength for a
homogeneous specimen of undisturbed, re-compacted, remoulded or reconstituted soil under
compression loading within the scope of geotechnical investigations.
This test method is useful to estimate the undrained shear strength of soil. It is noted that drainage
is not prevented during this test. The estimated value for undrained shear strength is, therefore, only
valid for soils of low permeability, which behave sufficiently undrained during the test.
NOTE This document fulfils the requirements of unconfined compression tests for geotechnical investigation
and testing in accordance with EN 1997-1 and EN 1997-2.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17892-6:2017(Main)
Geotechnical investigation and testing - Laboratory testing of soil - Part 6: Fall cone test (ISO 17892-6:2017)
EN ISO 17892-6:2017

This document specifies the laboratory determination of undrained shear strength of both undisturbed and remoulded specimen of saturated fine grained cohesive soils by use of a fall-cone.
This document specifies the fall-cone test, in which a cone is allowed to fall with its tip towards a soil specimen, whereupon the penetration of the cone into the soil is measured. Tests performed according to this test yield penetration values which can be used to estimate the undrained shear strength. The test is applicable to both undisturbed and remoulded soil test specimen.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day