Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for sanders and polishers other than disk type

2012-10-04 - Enquiry editing allocated to aclausse@cencenelec.eu
D140/C009: NWI approved * ENQ + FV track * In hands of newly set up WG 4

Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere Anforderungen für Schleifer und Polierer außer Tellerschleifern

Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les ponceuses et les lustreuses autres que du type à disque

Električna ročna orodja - Varnost - 2-4. del: Posebne zahteve za brusilnike in polirnike, razen diskovnih brusilnikov

General Information

Status
Not Published
Public Enquiry End Date
24-Feb-2013
Technical Committee
Current Stage
98 - Abandoned project (Adopted Project)
Start Date
21-Jan-2020
Due Date
26-Jan-2020
Completion Date
21-Jan-2020

Relations

Buy Standard

Draft
EN 60745-2-4:2010/oprAB:2013
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60745-2-4:2010/oprAB:2013
01-februar-2013
(OHNWULþQDURþQDRURGMD9DUQRVWGHO3RVHEQH]DKWHYH]DSHVNDOQLNHLQ
EUXVLOQLNHNLQLVRNROXWQL
Hand-held motor-operated electric tools - Safety - Part 2-4: Particular requirements for
sanders and polishers other than disk type
Handgeführte motorbetriebene Elektrowerkzeuge - Sicherheit - Teil 2-4: Besondere
Anforderungen für Schleifer und Polierer außer Tellerschleifern
Outils électroportatifs à moteur - Sécurité - Partie 2-4: Règles particulières pour les
ponceuses et les lustreuses autres que du type à disque
Ta slovenski standard je istoveten z: EN 60745-2-4:2009/prAB:2012
SIST EN 60745-2-4:2010/oprAB:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60745-2-4:2010/oprAB:2013

---------------------- Page: 2 ----------------------

SIST EN 60745-2-4:2010/oprAB:2013
 DRAFT
EUROPEAN STANDARD
EN 60745-2-4
prAB
NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM

ICS


English version


Hand-held motor-operated electric tools -
Safety -
Part 2-4: Particular requirements for sanders and polishers other than disk type



Outils électroportatifs à moteur -  Handgeführte motorbetriebene
Sécurité - Elektrowerkzeuge -
Partie 2-4: Règles particulières pour les Sicherheit -
ponceuses et les lustreuses autres que du Teil 2-4: Besondere Anforderungen für
type à disque Schleifer und Polierer außer Tellerschleifern



This draft amendment prAB, if approved, will modify the European Standard EN 60745-2-4:2009; it is submitted to
CENELEC members for CENELEC enquiry.
Deadline for CENELEC: 2013-05-10.

It has been drawn up by CLC/TC 116.

If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal
Regulations which stipulate the conditions for giving this amendment the status of a national standard without any
alteration.

This draft amendment was established by CENELEC in three official versions (English, French, German). A version in
any other language made by translation under the responsibility of a CENELEC member into its own language and
notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change
without notice and shall not be referred to as a European Standard.


CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Project: 23761 Ref. No. EN 60745-2-4:2009/prAB:2012 E

---------------------- Page: 3 ----------------------

SIST EN 60745-2-4:2010/oprAB:2013
EN 60745-2-4:2009/prAB:2012 - 2 -
1 Foreword
2 This document [EN 60745-2-4:2009/prAB:2012] has been prepared by CLC/TC 116 "Safety of motor-
3 operated electric tools".
4 This document is currently submitted to the Enquiry.
5 This document has been prepared under a mandate given to CENELEC by the European Commission
6 and the European Free Trade Association, and supports essential requirements of EU Directive(s).
7 This amendment was developed to set out requirements for the measurement of the concentration for
8 inhalable and respirable dust emitted by sanders while sanding materials containing quartz.
9 Clauses, subclauses, notes, tables and figures which are additional to those in IEC 60745-2-4 are
10 prefixed “Z”.
11 Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101;
12 additional annexes are lettered AA, BB, etc.

---------------------- Page: 4 ----------------------

SIST EN 60745-2-4:2010/oprAB:2013
- 3 - EN 60745-2-4:2009/prAB:2012
13 Text of prAB to EN 60745-2-4:2009
14 Annexes
15 Add the following new Annex:
16 Annex ZC
17 (normative)
18
19 Dust measurement
20 ZC.1 Scope
21 This clause of Part 1 is applicable except as follows:
22 Addition:
23 Annex ZC applies to the measurement of the concentration for inhalable and respira
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.