SIST EN IEC 60317-74:2018/A1:2024

Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 (IEC 60317-74:2018/AMD1:2024)

Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 74: Flachdrähte aus Aluminium, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-74:2018/AMD1:2024)

Spécifications pour types particuliers de fils de bobinage - Partie 74: Fil de section rectangulaire émaillé en aluminium revêtu de polyesterimide, de classe 180 (IEC 60317-74:2018/AMD1:2024)

Specifikacije za posebne vrste navijalnih žic - 74. del: Aluminijasta žica s pravokotnim prerezom, emajlirana s poliesterimidom, razred 180 - Dopolnilo A1 (IEC 60317-74:2018/AMD1:2024)

General Information

• Status: Published
• Public Enquiry End Date: 30-Oct-2023
• Publication Date: 18-Aug-2024
• ICS: 29.060.10 - Wires
• ICS: 77.150.10 - Aluminium products
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 07-Aug-2024
• Due Date: 12-Oct-2024
• Completion Date: 19-Aug-2024
• Ref Project: EN IEC 60317-74:2018/A1:2024 - Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180

Relations

• Amends: SIST EN IEC 60317-74:2018 - Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 (IEC 60317-74:2018)
• Effective Date: 01-Sep-2024

Overview

EN IEC 60317-74:2018/A1:2024 is the CENELEC (European) adoption of IEC Amendment 1 to Part 74 of the IEC 60317 series. It covers polyesterimide enamelled rectangular aluminium winding wire, class 180, and updates the original 2018 Part 74 requirements. The amendment aligns the Part 74 specification with the general requirements and test methods given in IEC 60317-0-9:2015 (and its 2024 amendment). This European Standard was approved by CENELEC in July 2024.

Key Topics and Requirements

• Product focus: polyesterimide enamel insulation on rectangular aluminium conductor intended for electrical windings (class 180).
• Normative references: the document is to be used in conjunction with IEC 60317-0-9:2015 and IEC 60317-0-9:2015/AMD1:2024, which establish general requirements and test methods for enamelled rectangular aluminium wire.
• Testing and conformity:
  • Methods of test follow subclause 3.2.1 of IEC 60317-0-9 (and its amendment). Where inconsistencies occur, Part 74 takes precedence.
  • Electrical resistance requirements and measurement procedures are governed by Clause 5 of IEC 60317-0-9 and its 2024 amendment.
  • The amendment explicitly states that the springiness test is inappropriate for this type of wire.
• Amendment nature: A1 modifies references, testing cross-references and clarifies the relationship between Part 74 and the general Part 0-9 requirements.

Applications and Users

Who benefits from this standard:

• Manufacturers of enamelled aluminium rectangular winding wire seeking harmonized European/IEC requirements.
• Designers and engineers of motors, transformers, inductors and other electromagnetic devices who specify winding wire (where rectangular aluminium may be chosen for space-saving or cost/weight reasons).
• Quality and procurement teams verifying supplier compliance and performing incoming inspection.
• Test laboratories and conformity assessors implementing standardized test procedures referenced by the amendment.

Related Standards

• IEC 60317-0-9:2015 - General requirements for enamelled rectangular aluminium wire (including AMD1:2024)
• IEC 60317-74:2018 - Base Part 74 (amended by A1:2024)
• National and regional adoptions/endorsements (CENELEC members) for consistent application across Europe

Keywords: EN IEC 60317-74:2018/A1:2024, polyesterimide enamelled rectangular aluminium wire, winding wires standard, class 180, IEC 60317-0-9, electrical resistance, test methods, CENELEC amendment.

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2024
Specifikacije za posebne vrste navijalnih žic - 74. del: Aluminijasta žica s
pravokotnim prerezom, emajlirana s poliesterimidom, razred 180 - Dopolnilo A1
(IEC 60317-74:2018/AMD1:2024)
Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled
rectangular aluminium wire, class 180 (IEC 60317-74:2018/AMD1:2024)
Technische Lieferbedingungen für bestimmte Typen von Wickeldrähten - Teil 74:
Flachdrähte aus Aluminium, lackisoliert mit Polyesterimid, Klasse 180 (IEC 60317-
74:2018/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Partie 74: Fil de section
rectangulaire émaillé en aluminium revêtu de polyesterimide, de classe 180 (IEC 60317-
74:2018/AMD1:2024)
Ta slovenski standard je istoveten z: EN IEC 60317-74:2018/A1:2024
ICS:
29.060.10 Žice Wires
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60317-74:2018/A1

NORME EUROPÉENNE
EUROPÄISCHE NORM August 2024
ICS 29.060.10
English Version
Specifications for particular types of winding wires - Part 74:
Polyesterimide enamelled rectangular aluminium wire, class 180
(IEC 60317-74:2018/AMD1:2024)
Spécifications pour types particuliers de fils de bobinage - Technische Lieferbedingungen für bestimmte Typen von
Partie 74: Fil de section rectangulaire émaillé en aluminium Wickeldrähten - Teil 74: Flachdrähte aus Aluminium,
revêtu de polyesterimide, de classe 180 lackisoliert mit Polyesterimid, Klasse 180
(IEC 60317-74:2018/AMD1:2024) (IEC 60317-74:2018/AMD1:2024)
This amendment A1 modifies the European Standard EN IEC 60317-74:2018; it was approved by CENELEC on 2024-07-19. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60317-74:2018/A1:2024 E

European foreword
The text of document 55/2001/CDV, future IEC 60317-74/AMD1, prepared by IEC/TC 55 "Winding
wires" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-04-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-07-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60317-74:2018/AMD1:2024 was approved by CENELEC as
a European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Replace the references with:
Publication Year Title EN/HD Year
IEC 60317-0-9 2015 Specifications for particular types of EN 60317-0-9 2015
winding wires - Part 0-9: General
requirements - Enamelled rectangular
aluminium wire
+ AMD1 2024 +A1 2024
IEC 60317-74 ®
Edition 1.0 2024-06
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
AMENDMENT 1
AMENDEMENT 1
Specifications for particular types of winding wires –

Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180

Spécifications pour types particuliers de fils de bobinage –

Partie 74: Fil de section rectangulaire émaillé en aluminium revêtu de

polyesterimide, de classe 180
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.10  ISBN 978-2-8322-9083-5

Attention
...