SIST EN 13271:2002
(Main)Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints
This European Standard specifies relationships for the determination of load-carrying capacities of connector joints in timber structures and appertaining reference conditions.
It also gives recommendations for characteristic values for slip moduli for joints in solid timber (in accordance with EN 338) or glued laminated timber (in accordance with EN 1194).
Holzverbindungsmittel - Charakteristische Tragfähigkeiten und Verschiebungsmoduln für Verbindungen mit Dübeln besonderer Bauart
Diese Norm legt Relationen für die Bestimmung der Tragfähigkeiten von Verbindungen mit Dübeln in Holzbau-werken und die betreffenden Randbedingungen fest.
Diese Norm enthält auch Empfehlungen für charakteristische Werte von Verschiebungsmoduln für Verbindungen von Vollholz (nach EN 338) oder Brettschichtholz (nach EN 1194).
Eléments de fixation du bois - Valeurs caractéristiques de capacité résistante et du module de glissement des assembleurs mécaniques du bois
La présente norme indique comment déterminer les valeurs de capacité résistante des assemblages du bois réalisés a l'aide d'organes d'assemblage dans les structures en bois par rapport a des conditions de référence.
Elle donne également des recommandations pour les valeurs caractéristiques des modules de glissement pour les assemblages dans les bois massifs (voir EN 338) ou lamellés-collés (voir EN 1194).
Vezna sredstva za les - Značilne nosilnosti in moduli zdrsa za mozničene spoje
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Holzverbindungsmittel - Charakteristische Tragfähigkeiten und Verschiebungsmoduln für Verbindungen mit Dübeln besonderer BauartEléments de fixation du bois - Valeurs caractéristiques de capacité résistante et du module de glissement des assembleurs mécaniques du boisTimber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints91.080.20Lesene konstrukcijeTimber structures21.060.99Drugi vezni elementiOther fastenersICS:Ta slovenski standard je istoveten z:EN 13271:2001SIST EN 13271:2002en01-julij-2002SIST EN 13271:2002SLOVENSKI
STANDARD
SIST EN 13271:2002
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13271November 2001ICS 21.060.99; 91.080.20English versionTimber fasteners - Characteristic load-carrying capacities andslip-moduli for connector jointsEléments de fixation du bois - Valeurs caractéristiques decapacité résistance et du module de glissement desassembleurs mécaniques du boisHolzverbindungsmittel - Charakteristische Tragfähigkeitenund Verschiebungsmoduln für Verbindungen mit Dübelnbesonderer BauartThis European Standard was approved by CEN on 4 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13271:2001 ESIST EN 13271:2002
EN 13271:2001 (E)2ContentspageForeword.31Scope.42Normative references.43Terms and definitions.44Symbols and abbreviations.45Ring and shear plate connector joints.55.1Connector types.55.2Characteristic load-carrying capacities.55.3Additional reference conditions.65.4Characteristic slip moduli.66Toothed-plate connector joints.76.1Connector types.76.2Characteristic load-carrying capacities.76.3Additional reference conditions.86.4Characteristic slip moduli.8Annex A
(normative)
Determination of load-carrying capacities of ring and shear plateconnector joints.10Annex B
(normative)
Determination of load-carrying capacities of toothed-plate connectorjoints.12SIST EN 13271:2002
EN 13271:2001 (E)3ForewordThis European Standard has been prepared by Technical Committee CEN/TC 124, "Structural timber", thesecretariat of which is held by DS.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by May 2002, and conflicting national standards shall be withdrawn at the latest byMay 2002.This standard is one of a series of standards for building materials. It was prepared by a working group under theconvenorship of DIN, Germany.It is recognized that the characteristic load-carrying capacities of connector units defined in this standard will beinterpreted with respect to design, structural detailing, and control, by reference to ENV 1995-1-1.The annexes A and B are normative.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,Switzerland and the United Kingdom.SIST EN 13271:2002
EN 13271:2001 (E)41 ScopeThis European Standard specifies relationships for the determination of load-carrying capacities of connector jointsin timber structures and appertaining reference conditions.It also gives recommendations for characteristic values for slip moduli for joints in solid timber (in accordance withEN 338) or glued laminated timber (in accordance with EN 1194).2 Normative referencesThis European Standard incorporates by dated or undated reference, provisions from other publications. Thesenormative references are cited at the appropriate places in the text, and the publications are listed hereafter. Fordated references, subsequent amendments to or revisions of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision. For undated references the latest edition of thepublication referred to applies (including amendments).EN 338, Structural timber – Strength classes.EN 912, Timber fasteners – Specifications for connectors for timber.EN 1194, Timber structures – Glued laminated timber – Strength classes and determination ofcharacteristic values.EN 26891, Timber structures – Joints made with mechanical fasteners – General principles for thedetermination of strength and deformation characteristics (ISO 6891:1983).ENV 1995-1-1, Eurocode 5: Design of timber structures - Part 1-1: General rules and rules forbuildings.3 Terms and definitionsFor the purposes of this European Standard the following term and definition apply.3.1connector unit- one ring connector with its bolt in single shear in a timber-to-ti
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.