SIST EN 17530:2022/kFprA1:2024
(Amendment)Railway applications - Interior glazing for rail vehicles
Railway applications - Interior glazing for rail vehicles
This document specifies the functional, performance, and quality requirements for the interior glazing of rail vehicles including type testing, routine testing, and inspection methods.
This document applies to all rail vehicles.
Determination of the size, shape, orientation and position of interior glazing is outside the scope of this document.
This document does not specify requirements for the interfaces between the interior glazing and the vehicle. Accordingly, this document does not address issues relating to installation and structural integrity.
This document does not apply to interior glazing with a surface less than 0,02 m2 and also emergency device casings (e.g. cover sheets for emergency hammers, passenger alarm systems, etc).
This document does not apply to materials other than glass.
For safety reasons, where the use of a specific type of glass is required, this shall be set out in the technical specification or defined in national rules.
Bahnanwendungen - Innenverglasung für Schienenfahrzeuge
Applications ferroviaires - Vitrage intérieur pour véhicules ferroviaires
Železniške naprave - Notranja zasteklitev za železniška vozila - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17530:2022/oprA1:2023
01-november-2023
Železniške naprave - Notranja zasteklitev za železniška vozila
Railway applications - Interior glazing for rail vehicles
Bahnanwendungen - Innenverglasung für Schienenfahrzeuge
Applications ferroviaires - Vitrage intérieur pour véhicules ferroviaires
Ta slovenski standard je istoveten z: EN 17530:2022/prA1
ICS:
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
SIST EN 17530:2022/oprA1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17530:2022/oprA1:2023
---------------------- Page: 2 ----------------------
SIST EN 17530:2022/oprA1:2023
DRAFT
EUROPEAN STANDARD
EN 17530:2022
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2023
ICS 45.060.01
English Version
Railway applications - Interior glazing for rail vehicles
Applications ferroviaires - Vitrage intérieur pour Bahnanwendungen - Innenverglasung für
véhicules ferroviaires Schienenfahrzeuge
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 256.
This draft amendment A1, if approved, will modify the European Standard EN 17530:2022. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17530:2022/prA1:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17530:2022/oprA1:2023
EN 17530:2022/prA1:2023 (E)
Contents
European foreword . 3
1 Modification to the scope . 4
2 Modification to Clause 2, Normative references . 4
3 Modifications to 3.13 Partition screen . 4
4 Modifications to 4.2 Laminated glass . 5
5 Modifications to Clause 5, Functional requirements . 5
6 Modifications to 6.1.2.1 General . 5
7 Modifications to 7.1.1.2 Test arrangement. 5
8 Modifications to 7.1.1.4 Acceptance criteria . 6
9 Modifications to Figure 7 . 6
2
---------------------- Page: 4 ----------------------
SIST EN 17530:2022/oprA1:2023
EN 17530:2022/prA1:2023 (E)
European foreword
This document (EN 17530:2022/prA1:2023) has been prepared by Technical Committee CEN/TC
256 “Railway applications”, the secretariat of which is held by DIN.
This document is curr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.