iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 50112:2001

(Main)

Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies

Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies

This standard applies to metal protecting tubes, used for straight thermocouple (t/c) assemblies, where the components parts are exposed to internal or external pressures, (ISO 7268), and where the working conditions have to be taken into consideration for the materials used

Messen, Steuern, Regeln - Elektrische Temperaturaufnehmer - Metall-Schutzrohre für Thermoelemente

Mesure, commande, régulation - Capteurs électriques de température - Tubes protecteurs métalliques pour assemblages de couples thermoélectriques

Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies

General Information

Status
Withdrawn
Publication Date
31-Aug-2001
Withdrawal Date
19-Aug-2018
ICS
17.200.20 - Temperature-measuring instruments
Technical Committee
ETC - Electrotechnical technical committe
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Aug-2018
Due Date
24-Aug-2018
Completion Date
20-Aug-2018
Ref Project
EN 50112:1994 - Measurement, control, regulation - Electrical temperature sensors - Metal protecting tubes for TC assemblies

Relations

Replaced By
SIST EN 50446:2007 - Straight thermocouple assembly with metal or ceramic protection tube and accessories
Effective Date
01-Jan-2007
Replaced By
SIST EN 50446:2007 - Straight thermocouple assembly with metal or ceramic protection tube and accessories
Effective Date
07-Jun-2022

Buy Standard

EN 50112:2001EN 50112:2001
PreviousNext
Standard
EN 50112:2001
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 50112:2001
01-september-2001
Measurement, control, regulation - Electrical temperature sensors - Metal
protecting tubes for TC assemblies
Measurement, control, regulation - Electrical temperature sensors - Metal protecting
tubes for TC assemblies
Messen, Steuern, Regeln - Elektrische Temperaturaufnehmer - Metall-Schutzrohre für
Thermoelemente
Mesure, commande, régulation - Capteurs électriques de température - Tubes
protecteurs métalliques pour assemblages de couples thermoélectriques
Ta slovenski standard je istoveten z: EN 50112:1994
ICS:
17.200.20 Instrumenti za merjenje Temperature-measuring
temperature instruments
SIST EN 50112:2001 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 50112:2001

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 257:2022(Main)
Mechanical thermostats for gas-burning appliances
EN 257:2022

This European Standard specifies the safety, construction and performance requirements for mechanical thermostats intended for use with gas appliances and similar use, hereafter referred to as ‘thermostats’.
This European Standard applies to thermostats with declared maximum inlet pressures up to and including 50 kPa (500 mbar) of nominal connection sizes up to and including DN 50 for use with one or more fuel gases in accordance with EN 437.
This European Standard applies to thermostats controlling the gas flow directly or indirectly through an integral gas valve, and which do not require external electrical energy for their operation.
This European Standard only applies to thermostats used with gas appliances which are not installed in the open air.
Thermostats dealt with in this European Standard are intended for control functions.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1434-6:2022(Main)
Thermal energy meters - Part 6: Installation, commissioning, operational monitoring and maintenance
EN 1434-6:2022

This document specifies commissioning, operational monitoring and maintenance and applies to thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units.
Electrical safety requirements are not covered by this document.
Pressure safety requirements are not covered by this document.
Surface mounted temperature sensors are not covered by this document.
This document covers meters for closed systems only, where the differential pressure over the thermal load is limited.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1434-2:2022(Main)
Thermal energy meters - Part 2: Constructional requirements
EN 1434-2:2022

This document specifies the constructional requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units.
Electrical safety requirements are not covered by this document.
Pressure safety requirements are not covered by this document.
Surface mounted temperature sensors are not covered by this document.
This document covers meters for closed systems only, where the differential pressure over the thermal load is limited.

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1434-5:2022(Main)
Thermal energy meters - Part 5: Initial verification tests
EN 1434-5:2022

This document specifies initial verification tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units.
Electrical safety requirements are not covered by this document.
Pressure safety requirements are not covered by this document.
Surface mounted temperature sensors are not covered by this document.
This document covers meters for closed systems only, where the differential pressure over the thermal load is limited.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1434-4:2022(Main)
Thermal energy meters - Part 4: Pattern approval tests
EN 1434-4:2022

This document specifies pattern approval tests for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units.
Electrical safety requirements are not covered by this document.
Pressure safety requirements are not covered by this document.
Surface mounted temperature sensors are not covered by this document.
This standard covers meters for closed systems only, where the differential pressure over the thermal load is limited.

  • Standard
    77 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1434-1:2022(Main)
Thermal energy meters - Part 1: General requirements
EN 1434-1:2022

This document specifies the general requirements for thermal energy meters. Thermal energy meters are instruments intended for measuring the energy which in a heat-exchange circuit is absorbed (cooling) or given up (heating) by a liquid called the heat-conveying liquid. The thermal energy meter indicates the quantity of thermal energy in legal units.
Electrical safety requirements are not covered by this document.
Pressure safety requirements are not covered by this document.
Surface mounted temperature sensors are not covered by this document.
This document covers meters for closed systems only, where the differential pressure over the thermal load is limited.

  • Standard
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-11:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part 11: Effectiveness of residual current monitors (RCM) in TT, TN and IT systems (IEC 61557-11:2020)
EN IEC 61557-11:2022

IEC 61557-11:2009 specifies the requirements for testing equipment applied to the testing of the effectiveness of residual current monitors (RCMs) of type A and type B, which are already installed in distribution systems. This test equipment can be used in any kind of network like a TN, TT or IT system. The test equipment may also be used for testing directionally discriminating RCMs in IT-Systems.This part is to be used in conjunction with IEC 61557-1:2007, Part 1: General requirements.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 60751:2022(Main)
Industrial platinum resistance thermometers and platinum temperature sensors (IEC 60751:2022)
EN IEC 60751:2022

This International Standard specifies the requirements, in addition to the resistance versus
temperature relationship, for both industrial platinum resistance thermometers (later referred to
as "thermometers") and industrial platinum resistance temperature sensors (later referred to as
"platinum resistors") whose electrical resistance is derived from defined functions of
temperature.
Values of temperature in this document are in terms of the International Temperature Scale of
1990, ITS-90. A temperature in the unit °C of this scale is denoted by the symbol t, except in
Table A.1 where the full nomenclature t90 /°C is used.
This document applies to platinum resistors whose temperature coefficient α, defined as
is conventionally written as α = 3,851⋅10-3 °C-1, where R100 is the resistance at t = 100 °C and R0 is the resistance at t = 0 °C.
This document covers platinum resistors and thermometers for the temperature range −200 °C
to +850 °C with different tolerance classes. It can also cover particular platinum resistors or
thermometers for a part of this temperature range.
For resistance versus temperature relationships with uncertainties less than 0,1 °C, which are
possible only for platinum resistors or thermometers with exceptionally high stability and
individual calibration, a more complex interpolation equation than is presented in this document
can be necessary. The specification of such equations is outside the scope of this document.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61557-6:2022(Main)
Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 6: Effectiveness of residual current devices (RCD) in TT, TN and IT systems (IEC 61557-6:2019)
EN IEC 61557-6:2021

This part of IEC 61557 specifies the requirements applicable to measuring equipment for
testing the effectiveness of protective measures of residual current devices (RCD) installed in
TT, TN and IT systems.
It is not the purpose of this document to verify the RCD according to their product standards.
NOTE Applicable tripping tests for time and current of RCD are listed in Annex A, Table A.1

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN IEC 61757-2-1:2021(Main)
Fibre Optic Sensors - Part 2-1: Temperature measurement - Temperature sensors based on fibre Bragg gratings (IEC 61757-2-1:2021)
EN IEC 61757-2-1:2021

This part of IEC 61757 specifies the terminology, characteristic performance parameters and
related test methods of optical temperature sensors based on fibre Bragg gratings (FBG) that
carry out temperature measurements in the temperature range between –260 °C and 600 °C.
Generic specifications for fibre optic sensors are defined in IEC 61757.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day