iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 593:2000

(Main)

Industrial valves - Metallic butterfly valves

Industrial valves - Metallic butterfly valves

This standard specifies requirements for butterfly valves having metallic bodies of designations PN 2,5 to PN 40 and Class 125 to Class 300 inclusive, in the size range DN 40 to DN 2000 for use in flanged or butt welding piping systems and used for isolating, regulating or control applications.  For application as industrial process control valves, see prEN 1349 and EN 60534-2-1.

Industriearmaturen - Metallische Klappen

Diese Norm legt Anforderungen an Klappen mit metallischem Gehäuse PN 2,5 bis PN 40 und Class 125 bis einschließlich Class 300 von DN 40 bis DN 2000 fest, die für den Einbau in Rohrleitungen mit Flanschverbindungen oder Anschweißenden bestimmt sind und zum Absperren, Stellen oder Regeln benutzt werden. Bei Anwendung der Klappen als Regelarmaturen für die Prozeßregelung siehe prEN 1349 und EN 60534-2-1.

Robinetterie industrielle - Robinets métalliques a papillon

La présente norme donne les préscriptions des robinets a papillon a corps métallique désignés PN 2,5 a PN 40 et Class 125 a Class 300 inclus, de DN 40 a DN 2000 destinés a etre installés sur des canalisations munies de brides ou d'extrémités a souder en bout et utilisés en sectionnement, réglage ou régulation. Pour les applications en robinet de régulation des processus industriels voir prEN 1349 et l'EN 60534-2-1.

Industrijski ventili - Kovinske lopute

General Information

Status
Withdrawn
Publication Date
31-Aug-2000
Withdrawal Date
31-Aug-2004
ICS
23.060.30 - Gate valves
Technical Committee
IHPV - Hydraulics and pneumatics
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
01-Sep-2004
Due Date
01-Sep-2004
Completion Date
01-Sep-2004
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 593:1998 - Industrial valves - Metallic butterfly valves

Relations

Replaced By
SIST EN 593:2004 - Industrial valves - Metallic butterfly valves
Effective Date
01-Sep-2004

Buy Standard

EN 593:2000EN 593:2000
PreviousNext
Standard
EN 593:2000
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 593:2000
01-september-2000
Industrijski ventili - Kovinske lopute
Industrial valves - Metallic butterfly valves
Industriearmaturen - Metallische Klappen
Robinetterie industrielle - Robinets métalliques a papillon
Ta slovenski standard je istoveten z: EN 593:1998
ICS:
23.060.30 Zapirni ventili (zasuni) Gate valves
SIST EN 593:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 593:2000

---------------------- Page: 2 ----------------------

SIST EN 593:2000

---------------------- Page: 3 ----------------------

SIST EN 593:2000

---------------------- Page: 4 ----------------------

SIST EN 593:2000

---------------------- Page: 5 ----------------------

SIST EN 593:2000

---------------------- Page: 6 ----------------------

SIST EN 593:2000

---------------------- Page: 7 ----------------------

SIST EN 5
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 10434:2020(Main)
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2020)
EN ISO 10434:2020

This document specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for
petroleum refinery and related applications where corrosion, erosion and other service conditions can
indicate a need for full port openings, heavy wall sections and large stem diameters.
This document sets forth the requirements for the following gate valve features:
— bolted bonnet;
— outside screw and yoke;
— rising stems;
— non-rising handwheels;
— single or double gate;
— wedge or parallel seating;
— metallic seating surfaces;
— flanged or butt-welding ends.
It covers valves of the nominal sizes DN:
— 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600;
corresponding to nominal pipe sizes NPS:
— 1; 1¼; 1½; 2; 2½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24;
applies for pressure Class designations:
— 150; 300; 600; 900; 1 500; 2 500;
and applies for pressure PN designations:
— 16, 25, 40, 63, 100, 160, 250 and 400.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16139:2006/A1:2019(Amendment)
Industrial valves - Gate valves of thermoplastics materials - Amendment 1 (ISO 16139:2006/Amd 1:2019)
EN ISO 16139:2006/A1:2019
  • Amendment
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 593:2018(Main)
Industrial valves - Metallic butterfly valves for general purposes
EN 593:2017

This European Standard specifies minimum general requirements for butterfly valves having metallic bodies for use in wafer, lug, flange or butt welding piping systems and used for isolating, regulating or control applications.
The PN and Class ranges are:
-   PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160;
-   Class 150; Class 300; Class 600; Class 900.
The DN range is:
-   DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 100; DN 1 200; DN 1 400; DN 1 500; DN 1 600; DN 1 800; DN 2 000; DN 2 200; DN 2 400; DN 2 600; DN 2 800; DN 3 000; DN 3 200; DN 3 400; DN 3 600; DN 3 800; DN 4 000.
DN 750 is used only for Class 150 and Class 300.
NOTE   Intermediate DNs are allowed upon agreement between manufacturer and customer.
For valves subject to Pressure Equipment Directive, EN 16668 applies together with this European Standard.
For industrial process control valves, EN 1349 and EN 60534 2 1 apply together with this European Standard.
For water supply application, EN 1074 1 and EN 1074 2 apply together with this European Standard.
The correspondence between DN and NPS is given for information in Annex D.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    34 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1171:2015(Main)
Industrial valves - Cast iron gate valves
EN 1171:2015

This European Standard specifies the requirements for cast iron gate valves with flanged ends, socket ends or spigot ends.
This standard is applicable to cast iron gate valves mainly used for industrial and general-purpose applications. However, they can be used for other applications provided the requirements of the relevant performance standards are met.
The range of nominal sizes covered is:
DN 40 ; DN 50 ; DN 65 ; DN 80 ; DN 100 ; DN 125 ; DN 150 ; DN 200 ; DN 250 ; DN 300 ; DN 350 ; DN 400 ; DN 450 ; DN 500 ; DN 600 ; DN 700 ; DN 800 ; DN 900 ; DN 1 000.
The range of pressure designations covered is:
- isobaric PN 6; PN 10; PN 16; PN 25;
- isomorphic, PS 10 bar to PS 1 bar at room temperature.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 1984:2011(Main)
Industrial valves - Steel gate valves
EN 1984:2010

This European Standard specifies the requirements for steel gate valves which are wrought, cast or fabricated with end connections flanged, butt welding, socket welding or threaded.
This European Standard is applicable to steel gate valves mainly used for industrial and general purpose applications. However they can be used for other applications provided the requirements of the relevant performance standards are met.
The ranges of nominal sizes covered is:
DN  8; DN 10; DN 12; DN 15; DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1000.
DN 750 is used for Class designated valves only.
DN 8 and DN 12 are not used for flanged end connections.
Socket welding end valves and threaded end valves are limited to the range DN 8 to DN 65.
The range of pressure designations covered is:
a) for flanged valves
- PN 10; PN 16; PN 25; PN 40; PN 63; PN 100
- Class 150; Class 300; Class 600
b) for butt welding end valves
- PN 10, PN 16, PN 25, PN 40, PN 63, PN 100
- Class 150, Class 300, Class 600
c) for socket welding end valves and threaded end valves
- PN 10; PN 16; PN 25; PN 40; PN 63; PN 100
- Class 600; Class 800
NOTE 1 Socket welding end and threaded end valves are not normally manufactured with the pressure designations PN 10, PN 16, PN 25 and PN 40.
NOTE 2 Class 800 is an intermediate class designation widely used for socket welding and threaded end valves.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12288:2011(Main)
Industrial valves - Copper alloy gate valves
EN 12288:2010

This European Standard applies to copper alloy gate valves for general use having flanged, threaded, capillary, compression or loose nut/union body ends.
This European Standard specifies the design and performance requirements including materials, pressure/temperature ratings, dimensions, test procedures and marking.
For some specific fields of application, for example, drinking water or gas, valves to this European Standard can be used provided the requirements of the relevant performance standards are met. Approval by the relevant regulatory body may be required.
The range of nominal sizes is DN 8 to DN 500 and of nominal diameters is 8 mm to 110 mm.
The range of pressure designations covered is PN 6 ; PN 10 ; PN 16 ; PN 20 ; PN 25 ; PN 32 ; PN 40 ; PN 63 ; Class 150 and Class 300.
For the applicability of each nominal size/diameter and each pressure designation to the different types of valve end, see 4.1.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 16139:2006(Main)
Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
EN ISO 16139:2006

This EN specifies requirements for gate valves of thermoplastic material for isolating service. This standard applies to hand or power operated gate valves to be installed in industrial pipe systems, irrespective of the field of application and the fluids to be conveyed. For other and/or special applications special requirements may apply. The range of DN is: DN 40, DN 50, DN 65, DN 80, DN 100, DN 125, DN 150, DN 200, DN 250, DN 300 and DN 350. The range of PN and Class is: PN 2,5, PN 4, PN 6, PN 10, PN 16 and Class 150.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
oSIST prEN 593:2020(Main)
Industrial valves - Metallic butterfly valves
prEN 593

This European Standard specifies minimum general requirements for butterfly valves having metallic bodies for use with all type of pipe end connections (e.g. wafer, lug, flange, butt welding) and used for isolating, regulating or control applications.
The PN and Class ranges are:
-   PN 2,5; PN 6; PN 10; PN 16; PN 25; PN 40; PN 63; PN 100; PN 160;
-   Class 150; Class 300; Class 600; Class 900.
The size range is:
-   DN 20; DN 25; DN 32; DN 40; DN 50; DN 65; DN 80; DN 100; DN 125; DN 150; DN 200; DN 250; DN 300; DN 350; DN 400; DN 450; DN 500; DN 600; DN 700; DN 750; DN 800; DN 900; DN 1 000; DN 1 050; DN 1 100; DN 1 200; DN 1 400; DN 1 500; DN 1 600; DN 1 800; DN 2 000; DN 2 200; DN 2 400; DN 2 600; DN 2 800; DN 3 000; DN 3 200; DN 3 400; DN 3 600; DN 3 800; DN 4 000.
DN 750 and DN 1 050 are used only for Class 150 and Class 300.
Intermediate DNs are allowed upon agreement between manufacturer and customer.
For valves subject to European legislation on pressure equipment, EN 16668 applies together with this European Standard.
For industrial process control valves, EN 1349 and EN 60534 2 1 apply together with this European Standard.
For water supply application, EN 1074 1 and EN 1074 2 apply together with this European Standard.
NOTE 1   Butterfly valves for water supply application do not comply with Annex ZA and are not CE marked because they are excluded from the pressure equipment European legislation.
NOTE 2   The range of DN, applicable to each PN, for wafer and wafer lug valve types is as given in the appropriate part of EN 1092 for Type 11 flanges for the applicable material. The range of DN, applicable to each PN, for flanged valve types is as given in the appropriate part of EN 1092 for Type 21 flanges for the applicable material.
The correspondence between DN and NPS is given for information in Annex D.

  • Draft
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST ISO 6002:2022(Main)
Industrial valves - Bolted bonnet steel gate valves
ISO 6002:2021

This document specifies the requirements for bolted bonnet steel gate vales having the following features:
— bolted bonnet;
— outside screw and yoke;
— inside screw (alternative for PN 10, PN 16, Class 150, PN 25 and PN 40 only);
— single or double obturator;
— wedge or parallel seating;
— with or without non-metallic obturator or seat seals;
— flanged or butt-welding ends.
It covers valves of the nominal sizes DN:
— 10; 15; 20; 25; 32; 40; 50; 65; 80; 100; 125; 150; 200; 250; 300; 350; 400; 450; 500; 600; 700; 800; 900; 1 000;
corresponding to nominal pipe sizes NPS:
— ⅜; ˝; ; 1; 1 Ľ; 1 ˝; 2; 2 ˝; 3; 4; 5; 6; 8; 10; 12; 14; 16; 18; 20; 24; 28; 32; 36; 40;
and applies to valves of the following pressure designations:
— PN 10; 16; 25; 40; 63; 100;
— Class 150; 300; 600.
This document applies to bolted bonnet steel gate valves used for all industrial applications.
Additional requirements given in the relevant application standards can apply to bolted bonnet steel gate valves used for more specific applications (e.g. for the water industry, the chemical and petrochemical process industry, the oil and gas industry).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off
SIST
SIST EN ISO 10434:2020(Main)
Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries (ISO 10434:2020)
EN ISO 10434:2020

This document specifies the requirements for a heavy-duty series of bolted bonnet steel gate valves for
petroleum refinery and related applications where corrosion, erosion and other service conditions can
indicate a need for full port openings, heavy wall sections and large stem diameters.
This document sets forth the requirements for the following gate valve features:
— bolted bonnet;
— outside screw and yoke;
— rising stems;
— non-rising handwheels;
— single or double gate;
— wedge or parallel seating;
— metallic seating surfaces;
— flanged or butt-welding ends.
It covers valves of the nominal sizes DN:
— 25; 32; 40; 50; 65; 80; 100; 150; 200; 250; 300; 350; 400; 450; 500; 600;
corresponding to nominal pipe sizes NPS:
— 1; 1¼; 1½; 2; 2½; 3; 4; 6; 8; 10; 12; 14; 16; 18; 20; 24;
applies for pressure Class designations:
— 150; 300; 600; 900; 1 500; 2 500;
and applies for pressure PN designations:
— 16, 25, 40, 63, 100, 160, 250 and 400.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day