SIST EN ISO 15792-2:2008
(Main)Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000)
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run technique test specimens in steel (ISO 15792-2:2000)
This standard specifies preparation of butt weld test assembly and specimens. The purpose is to define the test methods in order to determine strength and impact strength of the welded joint when testing welding consumables used for submerged arc welding and tubular cored arc welding with single-run and two-run technique. This standard is applicable to welding consumables for arc welding of steel.
Schweißzusätze - Prüfverfahren - Teil 2: Vorbereitung eines Prüfstücks zur Prüfung von Einlagen- und Lage/Gegenlage-Schweißungen an Stahl (ISO 15792-2:2000)
Dieser Teil von ISO 15792 legt die Herstellung der Prüfstücke für Stumpfnähte und der Proben fest. Der
Zweck ist, Prüfmethoden zur Bestimmung von Festigkeit und Kerbschlagarbeit der Schweißverbindung festzulegen,
wenn Schweißzusätze in der Einlagen- und Lage/Gegenlage-Technik geprüft werden. Die Norm gilt
nicht für Elektroschlacke- oder Elektrogasschweißen.
Dieser Teil von ISO 15792 gilt für Schweißzusätze für das Lichtbogenschweißen von Stahl.
Produits consommables pour le soudage - Méthodes d'essai - Partie 2: Préparation d'éprouvettes en une ou deux passes en acier (ISO 15792-2:2000)
Dodajni materiali za varjenje - Preskusne metode - 2. del: Priprava preskušancev za preskus enovarkovnega in dvovarkovnega varjenja jekel (ISO 15792-2:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 15792-2:2008
01-september-2008
1DGRPHãþD
SIST EN 1597-2:1998
Dodajni materiali za varjenje - Preskusne metode - 2. del: Priprava preskušancev
za preskus enovarkovnega in dvovarkovnega varjenja jekel (ISO 15792-2:2000)
Welding consumables - Test methods - Part 2: Preparation of single-run and two-run
technique test specimens in steel (ISO 15792-2:2000)
Schweißzusätze - Prüfverfahren - Teil 2: Vorbereitung eines Prüfstücks zur Prüfung von
Einlagen- und Lage/Gegenlage-Schweißungen an Stahl (ISO 15792-2:2000)
Produits consommables pour le soudage - Méthodes d'essai - Partie 2: Préparation
d'éprouvettes en une ou deux passes en acier (ISO 15792-2:2000)
Ta slovenski standard je istoveten z: EN ISO 15792-2:2008
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
SIST EN ISO 15792-2:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN ISO 15792-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 25.160.20 Supersedes EN 1597-2:1997
English Version
Welding consumables - Test methods - Part 2: Preparation of
single-run and two-run technique test specimens in steel (ISO
15792-2:2000)
Produits consommables pour le soudage - Méthodes Schweißzusätze - Prüfverfahren - Teil 2: Vorbereitung
d'essai - Partie 2: Préparation d'éprouvettes en une ou eines Prüfstücks zur Prüfung von Einlagen- und
deux passes en acier (ISO 15792-2:2000) Lage/Gegenlage-Schweißungen an Stahl (ISO 15792-
2:2000)
This European Standard was approved by CEN on 5 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15792-2:2008: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN ISO 15792-2:2008 (E)
Contents Page
Foreword.3
2
---------------------- Page: 3 ----------------------
EN ISO 15792-2:2008 (E)
Foreword
The text of ISO 15792-2:2000 has been prepared by Technical Committee ISO/TC 44 “Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as EN ISO
15792-2:2008 by Technical Committee CEN/TC 121 “Welding” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by November 2008, and conflicting national standards shall be withdrawn
at the latest by November 2008.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 1597-2:1997.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 15792-2:2000 has been approved by CEN as a EN ISO 15792-2:2008 without any
modification.
3
---------------------- Page: 4 ----------------------
INTERNATIONAL ISO
STANDARD 15792-2
First edition
2000-12-15
Welding consumables — Test methods —
Part 2:
Preparation of single-run and two-run
technique test specimens in steel
Produits consommables pour le soudage — Méthodes d'essai —
Partie 2 : Préparation d'éprouvettes en une ou deux passes en acier
Reference number
ISO 15792-2:2000(E)
©
ISO 2000
---------------------- Page: 5 ----------------------
ISO 15792-2:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2000
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
---------------------- Page: 6 ----------------------
ISO 15792-2:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 15792 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 15792-2 was prepared by Technical Committee ISO/TC 44, Welding and allied
processes, Subcommittee SC 3, Welding consumables.
ISO 15792 consists of the following parts, under the general title Welding consumables — Test methods:
� Part 1: Test methods for all-weld metal test specimens in steel, n
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.