oSIST prEN ISO 18134-2:2023

Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified method (ISO/DIS 18134-2:2023)

ISO 18134-2:2017 describes the method of determining the total moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on site. The method described in ISO 18134 (all parts) is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).

Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 2: Gesamtgehalt an Wasser - Vereinfachtes Verfahren (ISO/DIS 18134-2:2023)

Dieses Dokument beschreibt das Verfahren zur Bestimmung des Gesamtgehalts an Wasser einer Versuchsprobe von biogenen Festbrennstoffen durch Trocknen in einem Ofen und wird angewendet, wenn nicht die höchste Präzision erforderlich ist, z. B. zur routinemäßigen Produktionskontrolle im Betrieb. Das in ISO 18134 (alle Teile) beschriebene Verfahren ist auf alle biogenen Festbrennstoffe anwendbar. Der Wassergehalt von biogenen Festbrennstoffen (im Anlieferungszustand) wird immer bezogen auf die Gesamtmasse der Versuchsprobe (Bezugsbasis Feuchtmasse) angegeben.
ANMERKUNG   Biomassematerialien können geringe Mengen an flüchtigen organischen Verbindungen (VOC, en: volatile organic compounds) enthalten, die bei der Bestimmung des Wassergehaltes durch Ofentrocknung verdampfen können (siehe Literaturhinweise [1] und [2]). Die Freisetzung derartiger Verbindungen ist im Verhältnis zum Gesamtgehalt an Wasser, der mit diesem Verfahren bestimmt wird, verhältnismäßig gering und wird in diesem Dokument vernachlässigt.

Biocombustibles solides - Dosage de la teneur en humidité - Partie 2: Humidité totale - Méthode simplifiée (ISO/DIS 18134-2:2023)

ISO 18134-2:2017 décrit la méthode de détermination de la teneur en humidité totale d'un échantillon pour essai de biocombustibles solides par séchage à l'étuve. Cette méthode est utilisée lorsque la fidélité maximale n'est pas nécessaire, par exemple, pour un contrôle de routine de la production in situ. La méthode décrite dans l'ISO 18134 (toutes les parties) est applicable à l'ensemble des biocombustibles solides. La teneur en humidité des biocombustibles solides (à réception) est toujours rapportée à la masse totale de l'échantillon pour essai (base humide).

Trdna biogoriva - Določevanje vlage - 2. del: Celotna vlaga - Poenostavljena metoda (ISO/DIS 18134-2:2023)

General Information

• Status: Not Published
• Public Enquiry End Date: 31-May-2023
• ICS: 27.190 - Biological sources and alternative sources of energy
• ICS: 75.160.40 - Biofuels
• Technical Committee: AGO - Refuse derived fuel
• Current Stage: 4020 - Public enquire (PE) (Adopted Project)
• Start Date: 05-Apr-2023
• Due Date: 23-Aug-2023
• Completion Date: 02-Jun-2023
• Ref Project: prEN ISO 18134-2 - Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified method (ISO/DIS 18134‑2:2023)

Relations

• Revised: SIST EN ISO 18134-2:2017 - Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO 18134-2:2017)
• Effective Date: 01-May-2023

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 18134-2:2023
01-maj-2023
Trdna biogoriva - Določevanje vlage - 2. del: Celotna vlaga - Poenostavljena
metoda (ISO/DIS 18134-2:2023)
Solid biofuels - Determination of moisture content - Part 2: Total moisture - Simplified
method (ISO/DIS 18134-2:2023)
Biogene Festbrennstoffe - Bestimmung des Wassergehaltes - Teil 2: Gesamtgehalt an
Wasser - Vereinfachtes Verfahren (ISO/DIS 18134-2:2023)
Biocombustibles solides - Dosage de la teneur en humidité - Partie 2: Humidité totale -
Méthode simplifiée (ISO/DIS 18134-2:2023)
Ta slovenski standard je istoveten z: prEN ISO 18134-2
ICS:
75.160.40 Biogoriva Biofuels
oSIST prEN ISO 18134-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 18134-2:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 18134-2:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18134-2
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-03-24 2023-06-16
Solid biofuels — Determination of moisture content —
Part 2:
Total moisture — Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Partie 2: Humidité totale — Méthode simplifiée
ICS: 27.190; 75.160.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 18134-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 18134-2:2023
ISO/DIS 18134-2:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 18134-2
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:

Solid biofuels — Determination of moisture content —
Part 2:
Total moisture — Simplified method
Biocombustibles solides — Dosage de la teneur en humidité —
Partie 2: Humidité totale — Méthode simplifiée
ICS: 27.190; 75.160.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: [phone]
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: [e-mail]
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 18134-2:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 18134-2:2023
ISO/DIS 18134-2:2023(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 2
6 Sample preparation .2
6.1 Sample reduction . . 2
6.2 Pre-dried test sample . 2
6.3 Mass of test portion . . 2
7 Procedure .2
7.1 Handling of test portion . 2
7.2 Weighing of test portion . 3
8 Calculation . 3
8.1 General . 3
8.2 Moisture content on a wet basis . 3
8.3 Moisture content for pre-dried material . 4
9 Performance characteristics . 4
10 Test report . 4
Bibliography . 5
iii
© ISO 2023 – All rights reserved

---------------------- Page: 5 ----------------------
oSIST prEN ISO 18134-2:2023
ISO/DIS 18134-2:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 238, Solid biofuels, in collaboration with
the European Committee for Standardiz
...