iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN ISO 15611:2024

(Main)

Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024)

Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024)

This document gives the necessary information to explain the requirements referenced in ISO 15607 about
the qualification of welding procedures based on previous welding experience.
In addition, it gives the range of qualification.
The use of this document can be restricted by an application standard or a specification.

Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe - Qualifizierung aufgrund von vorliegender schweißtechnischer Erfahrung (ISO 15611:2024)

Dieses Dokument gibt die notwendigen Informationen wieder, um die Anforderungen in Bezug auf ISO 15607 für die Qualifizierung von Schweißverfahren aufgrund vorliegender schweißtechnischer Erfahrung zu erläutern.
Zusätzlich gibt es den Geltungsbereich und die Gültigkeit an.
Die Anwendung dieses Dokuments kann durch eine Anwendungsnorm oder durch eine Spezifikation beschränkt werden.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Qualification sur la base de l'expérience en soudage (ISO 15611:2024)

Le présent document donne les informations nécessaires pour expliquer les exigences référencées dans l’ISO 15607 concernant la qualification d'un mode opératoire de soudage sur la base de l'expérience en soudage.
De plus, il donne le domaine de validité de la qualification.
L'emploi du présent document peut être limité par une norme d'application ou une spécification.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Kvalifikacija na podlagi predhodnih varilskih izkušenj (ISO15611:2024)

Ta dokument podaja informacije, potrebne za razlago zahtev iz standarda ISO 15607 o kvalifikaciji varilnih postopkov na podlagi predhodnih varilskih izkušenj.
Poleg tega navaja tudi obseg kvalifikacije.
Uporabo tega dokumenta je mogoče omejiti s standardom za uporabo ali specifikacijo.

General Information

Status
Published
Public Enquiry End Date
01-Oct-2022
Publication Date
14-Feb-2024
ICS
25.160.10 - Welding processes
Technical Committee
VAR - Welding
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
17-Jan-2024
Due Date
23-Mar-2024
Completion Date
15-Feb-2024
Directive
2014/68/EU - Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN ISO 15611:2024 - Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2024)

Relations

Replaces
SIST EN ISO 15611:2004 - Specification and qualification of welding procedures for metallic materials - Qualification based on previous welding experience (ISO 15611:2003)
Effective Date
01-Mar-2024

Buy Standard

EN ISO 15611:2024EN ISO 15611:2024
PreviousNext
Standard
EN ISO 15611:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15611:2024
01-marec-2024
Nadomešča:
SIST EN ISO 15611:2004
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Kvalifikacija na
podlagi predhodnih varilskih izkušenj (ISO15611:2024)
Specification and qualification of welding procedures for metallic materials - Qualification
based on previous welding experience (ISO 15611:2024)
Anforderung und Qualifizierung von Schweißverfahren für metallische Werkstoffe -
Qualifizierung aufgrund von vorliegender schweißtechnischer Erfahrung (ISO
15611:2024)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Qualification sur la base de l'expérience en soudage (ISO 15611:2024)
Ta slovenski standard je istoveten z: EN ISO 15611:2024
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
SIST EN ISO 15611:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 15611:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 15611:2024


EN ISO 15611
EUROPEAN STANDARD

NORME EUROPÉENNE

January 2024
EUROPÄISCHE NORM
ICS 25.160.01 Supersedes EN ISO 15611:2003
English Version

Specification and qualification of welding procedures for
metallic materials - Qualification based on previous
welding experience (ISO 15611:2024)
Descriptif et qualification d'un mode opératoire de Anforderung und Qualifizierung von Schweißverfahren
soudage pour les matériaux métalliques - Qualification für metallische Werkstoffe - Qualifizierung aufgrund
sur la base de l'expérience en soudage (ISO von vorliegender schweißtechnischer Erfahrung (ISO
15611:2024) 15611:2024)
This European Standard was approved by CEN on 5 January 2024.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15611:2024 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 15611:2024
EN ISO 15611:2024 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 15611:2024
EN ISO 15611:2024 (E)
European foreword
This document (EN ISO 15611:2024) has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes" in collaboration with Technical Committee CEN/TC 121 “Welding and allied
processes” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2024, and conflicting national standards shall be
withdrawn at the latest by July 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 15611:2003.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN ISO 15614-13:2024(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 13: Upset (resistance butt) and flash welding (ISO 15614-13:2023)
EN ISO 15614-13:2023

This document specifies tests for the qualification of welding procedure specifications applicable to upset (resistance butt) welding and flash welding of metallic materials, e.g. with solid, tubular, flat or circular cross-section. Its basic principles can also be applied to other resistance welding processes when this is stated in the specification.
This document defines the conditions for carrying out tests and the limits of validity of a qualified welding procedure for all the practical welding operations that it covers.
It covers the following resistance welding processes, as defined in ISO 4063:
—    24 flash welding, using direct current or alternating current with various movement sequences, constant flashing and pulsed flashing;
—    25 resistance upset welding, using direct current or alternating current with various pressure sequences.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25980:2023(Main)
Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO 25980:2023)
EN ISO 25980:2023

This document specifies safety requirements for transparent welding curtains, strips and screens to be used in workplaces where arc welding is taking place. They are intended to provide protection against harmful levels of optical radiation and spatter for workers who are in the vicinity of arc welding processes but not involved in the welding itself. They are intended to reduce the discomfort glare from the arc but also allow sufficient luminous transmittance to permit a view into the workspace behind.
The transparent welding curtains can also be used in other applications as long as the UV- and blue-light emissions are less than in arc welding and the transmitted infrared irradiance is below applicable exposure limits. They are designed to be used at a distance from the arc of at least 1 m.
Welding curtains, strips and screens specified in this document are not intended to replace welding filters. For intentional viewing of welding arcs, other means of protection are used, see ISO 16321-1 and ISO 16321-2.
This document is not applicable to protection against laser radiation, for which ISO 19818-1 applies.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 17663:2023(Main)
Welding - Quality requirements for heat treatment in connection with welding and allied processes (ISO 17663:2023)
EN ISO 17663:2023

ISO 17663:2009 provides quality requirements for heat treatment in air or controlled atmospheres carried out in workshops and on site in connection with welding and forming. It applies mainly to ferritic steels, but can be used for other materials, as appropriate.
ISO 17663:2009 provides guidance for manufacturers that perform heat treatment or produce heat-treated products or components. ISO 17663:2009 can also be used as a basis for assessing the manufacturer in respect to its heat treatment capability.
ISO 17663:2009 is intended to be a flexible framework for the control of heat treatment processes. The fulfilment of a requirement can be waived where justification can be provided that a specific requirement is not applicable to a specific process.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15610:2023(Main)
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2023)
EN ISO 15610:2023

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607.
In addition, it gives the range of qualification.
Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service.
This document is limited to:
—    parent material thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2);
—    fillet welds with throat thickness a ≥ 1 mm.
This document is not applicable when any of the following is specified for the welded joint:
a)      hardness;
b)      impact properties;
c)       preheating;
d)      controlled heat input;
e)      interpass temperature;
f)       post-weld heat treatment.
The use of this document can also be restricted by an application standard, specification or other documents.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 25901-2:2023(Main)
Welding and allied processes - Vocabulary - Part 2: Health and safety (ISO 25901-2:2022)
EN ISO 25901-2:2023

This document contains terms and definitions applicable to health and safety in welding and allied processes. It is intended to be referenced in other documents dealing with this subject. In cases where such documents provide terms and definitions differing from those contained herein, the terms and definitions given in those documents apply.
In the main body of this document, terms are arranged in a systematic order. Annex A to C provide indexes in which all terms are listed alphabetically in English, French and German, with reference to the appropriate subclauses and translations of the terms in each and other languages.

  • Standard
    86 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 18278-1:2022(Main)
Resistance welding - Weldability - Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials (ISO 18278-1:2022)
EN ISO 18278-1:2022

This document specifies procedures for assessing the generic weldability for resistance spot, seam and
projection welding of uncoated and coated metals.
The purpose of the tests described in this document are to
a) compare the metallurgical weldability of different metals,
b) assess the weldability of differing component designs, e.g. dimensional configuration, stack-up,
projection geometry, etc.,
c) investigate the effect of changes in welding parameters such as welding current, weld time,
electrode force or complex welding schedules including pulse welding, current stepping etc. on
weldability, and/or
d) compare the performance of resistance welding equipment.
Precise details of the test procedure to be used depend on which aspect of items a) to d) will be
evaluated relative to the welding result obtained

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 15614-12:2022(Main)
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 12: Spot, seam and projection welding (ISO 15614-12:2021)
EN ISO 15614-12:2021

This document specifies the tests which can be used for qualification of welding procedure specifications
for spot, seam, and projection welding processes.
NOTE The procedures are written for embossed projection welding. They can be adapted for solid
projections as well, e.g. nut welding, stud welding. cross wire welding.
This document defines the conditions for carrying out tests and the limits of validity of a qualified
welding procedure for all practical welding operations covered by this document.
It covers the following resistance welding processes, as defined in ISO 4063:
— 21 – resistance spot welding;
— 211 – indirect spot welding;
— 212 – direct spot welding;
— 22 – resistance seam welding;
— 221 – lap seam welding;
— 222 – mash seam welding;
— 223 – Prep-lap seam welding;
— 224 – Wire seam welding;
— 225 – foil butt-seam welding;
— 226 – seam welding with strip;
— 23 – projection welding;
— 231 – indirect projection welding;
— 232 – direct projection welding

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3834-5:2022(Main)
Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 (ISO 3834-5:2021)
EN ISO 3834-5:2021

This document specifies the International Standards, including clauses and subclauses, with which
conformity to the quality requirements of ISO 3834-2, ISO 3834-3 or ISO 3834-4 can be claimed.
NOTE For brazing, see ISO 22688.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 13918:2018/A1:2021(Amendment)
Welding - Studs and ceramic ferrules for arc stud welding - Amendment 1 (ISO 13918:2017/Amd 1:2021)
EN ISO 13918:2018/A1:2021
  • Amendment
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3834-1:2021(Main)
Quality requirements for fusion welding of metallic materials - Part 1: Criteria for the selection of the appropriate level of quality requirements (ISO 3834-1:2021)
EN ISO 3834-1:2021

This document specifies a general outline of the ISO 3834 series and criteria to be taken into account for
the selection of the appropriate level of quality requirements for fusion welding of metallic materials,
among the three levels specified in ISO 3834-2, ISO 3834-3 and ISO 3834-4.
It is applicable to manufacturing, both in workshops and at field installation sites.
This document does not specify requirements for a total quality management system (QMS). However,
Clause 6 identifies QMS elements where their inclusion complements the ISO 3834 series.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day