SIST EN ISO 17831-1:2016

Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)

This document aims to define the requirements and method used for testing the mechanical durability of pellets. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to such pellets, and to all persons and organisations involved in producing, purchasing, selling and utilising pellets.
The durability is the measure of the resistance of compressed fuels towards shocks and/or abrasion as a consequence of handling and transportation processes.

Feste Biobrennstoffe - Bestimmung der mechanischen Festigkeit von Pellets und Briketts - Teil 1: Pellets (ISO 17831-1:2015)

Dieser Teil von ISO 17831 definiert ein Bestimmungsverfahren zur Prüfung der mechanischen Festigkeit von Pellets. Die mechanische Festigkeit ist ein Maß für die Beständigkeit von gepressten Brennstoffen gegenüber Stoß und/oder Abrieb infolge von Handhabungs  und Transportprozessen.

Biocombustibles solides - Détermination de la résistance mécanique des granulés et des briquettes - Partie 1: Granulés (ISO 17831-1:2015)

ISO 17831-1:2015 définit une méthode de détermination de l'essai de la résistance mécanique des granulés. La résistance mécanique est la mesure de la résistance aux chocs et/ou à l'abrasion subis par les combustibles comprimés, à la suite de processus de manipulation et de transport.

Trdna biogoriva - Določevanje mehanske odpornosti peletov in briketov - 1. del: Peleti (ISO 17831-1:2015)

Cilj tega dokumenta je opredelitev zahtev in metod, ki se uporabljajo za preskušanje mehanske odpornosti peletov. Namenjen je osebam in organizacijami, ki proizvajajo, načrtujejo, prodajajo, sestavljajo ali uporabljajo stroje, opremo, orodja in celotne obrate, povezane s peleti ter osebam in organizacijam, ki se ukvarjajo s proizvajanjem, nakupom, prodajo in uporabo peletov. Odpornost je merilo odpornosti stisnjenega goriva na udarce in/ali obrabo, ki se pojavi pri prevozu goriva ali delu z njim.

General Information

• Status: Published
• Public Enquiry End Date: 04-Dec-2013
• Publication Date: 10-Feb-2016
• ICS: 75.160.40 - Biofuels
• Technical Committee: AGO - Refuse derived fuel
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Jan-2016
• Due Date: 02-Apr-2016
• Completion Date: 11-Feb-2016
• Directive: 2000/76/EC - Directive 2000/76/EC of the European Parliament and of the Council of 4 December 2000 on the incineration of waste
• Mandate: M/298 - Mandate to CEN for standardisation in the field of solid biofuels
• Ref Project: EN ISO 17831-1:2015 - Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)

Relations

• Replaces: SIST EN 15210-1:2010 - Solid biofuels - Methods for the determination of mechanical durability of pellets and briquettes - Part 1: Pellets
• Effective Date: 01-Mar-2016

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17831-1:2016
01-marec-2016
1DGRPHãþD
SIST EN 15210-1:2010
7UGQDELRJRULYD'RORþHYDQMHPHKDQVNHRGSRUQRVWLSHOHWRYLQEULNHWRYGHO
3HOHWL,62
Solid biofuels - Determination of mechanical durability of pellets and briquettes - Part 1:
Pellets (ISO 17831-1:2015)
Feste Biobrennstoffe - Bestimmung der mechanischen Festigkeit von Pellets und Briketts
- Teil 1: Pellets (ISO 17831-1:2015)
Biocombustibles solides - Détermination de la résistance mécanique des granulés et des
briquettes - Partie 1: Granulés (ISO 17831-1:2015)
Ta slovenski standard je istoveten z: EN ISO 17831-1:2015
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
SIST EN ISO 17831-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 17831-1:2016

---------------------- Page: 2 ----------------------

SIST EN ISO 17831-1:2016


EN ISO 17831-1
EUROPEAN STANDARD

NORME EUROPÉENNE

December 2015
EUROPÄISCHE NORM
ICS 75.160.10; 27.190 Supersedes EN 15210-1:2009
English Version

Solid biofuels - Determination of mechanical durability of
pellets and briquettes - Part 1: Pellets (ISO 17831-1:2015)
Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der
résistance mécanique des granulés et des briquettes - mechanischen Festigkeit von Pellets und Briketts - Teil
Partie 1: Granulés (ISO 17831-1:2015) 1: Pellets (ISO 17831-1:2015)
This European Standard was approved by CEN on 17 October 2015.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17831-1:2015 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 17831-1:2016
EN ISO 17831-1:2015 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 17831-1:2016
EN ISO 17831-1:2015 (E)
European foreword
This document (EN ISO 17831-1:2015) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 15210-1:2009.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17831-1:2015 has been approved by CEN as EN ISO 17831-1:2015 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 17831-1:2016

---------------------- Page: 6 ----------------------

SIST EN ISO 17831-1:2016
INTERNATIONAL ISO
STANDARD 17831-1
First edition
2015-12-15
Solid biofuels — Determination of
mechanical durability of pellets and
briquettes —
Part 1:
Pellets
Biocombustibles solides — Détermination de la résistance mécanique
des granulés et des briquettes —
Partie 1: Granulés
Reference number
ISO 17831-1:2015(E)
©
ISO 2015

---------------------- Page: 7 ----------------------

SIST EN ISO 17831-1:2016
ISO 17831-1:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 8 ----------------------

SIST EN ISO 17831-1:2016
ISO 17831-1:2015(E)

Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 1
5 Apparatus . 1
6 Sample preparation . 3
7 Procedure. 3
7.1 Tumbling procedure . 3
7.2 Sieving procedure . 3
8 Calculation of the mechanical durability . 4
9 Performance characteristics . 4
9.1 General . 4
9.2 Repeatability . 4
9.3 Reproducibility . 4
10 Test report . 4
Annex A (informative) Example of pellets tester with two boxes . 6
Bibliography . 7
© ISO 2015 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST EN ISO 17831-1:2016
ISO 17831-1:2015(E)

Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Det
...