SIST EN 62386-102:2015
(Main)Digital addressable lighting interface - Part 102: General requirements - Control gear
Digital addressable lighting interface - Part 102: General requirements - Control gear
This Part of IEC 62386 is applicable to control gear in a bus system for control by digital
signals of electronic lighting equipment. This electronic lighting equipment should be in line
with the requirments of IEC 61347, with the addition of d.c. supplies.
NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are
not included.
Digital adressierbare Schnittstelle für die Beleuchtung - Teil 102: Allgemeine Anforderungen - Betriebsgeräte
Interface d’éclairage adressable numérique - Partie 102: Exigences générales - Appareillages de commande
L'IEC 62386-102:2014 est applicable aux appareillages de commande dans un système à bus de commande par signaux numériques des équipements d'éclairage électroniques. Il convient que ces équipements soient conformes aux exigences de l'IEC 61347, avec l'ajout des sources d'alimentation en courant continu. Cette deuxième édition annule et remplace la première édition parue en 2009. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
a) suppression de toutes les définitions non associées aux appareillages de commande,
b) amélioration des exigences pour les appareillages de commande par une clarification de la description,
c) amélioration des itérations de commandes d'essai pour une meilleure compatibilité,
d) addition de nouvelles commandes, et
e) suppression des exigences pour:
1) le cadencement;
2) les dispositifs de commande. Les exigences pour le cadencement sont désormais incluses dans la Partie 101 et les exigences pour les dispositifs de commande le sont dans la Partie 103.
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje (IEC 62386-102:2014)
Ta del standarda IEC 62386 se uporablja za krmilje v sistemu vodil za krmiljenje elektronske opreme
za razsvetljavo z digitalnimi signali. Ta elektronska oprema za razsvetljavo bi morala biti v skladu
z zahtevami iz standarda IEC 61347, z dodatkom enosmernega napajanja.
OPOMBA: Preskusi, obravnavani v tem standardu, so tipski preskusi. Zahteve za preskušanje posameznega krmilja med proizvodnjo niso vključene.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62386-102:2015
01-junij-2015
1DGRPHãþD
SIST EN 62386-102:2009
Digitalni naslovljivi vmesnik za razsvetljavo - 102. del: Splošne zahteve - Krmilje
(IEC 62386-102:2014)
Digital addressable lighting interface - Part 102: General requirements - Control gear
Ta slovenski standard je istoveten z: EN 62386-102:2014
ICS:
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
SIST EN 62386-102:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62386-102:2015
---------------------- Page: 2 ----------------------
SIST EN 62386-102:2015
EUROPEAN STANDARD EN 62386-102
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2014
ICS 29.140; 29.140.50 Supersedes EN 62386-102:2009
English Version
Digital addressable lighting interface -
Part 102: General requirements - Control gear
(IEC 62386-102:2014)
Interface d'éclairage adressable numérique - Digital adressierbare Schnittstelle für die Beleuchtung -
Partie 102: Exigences générales - Appareillages de Teil 102: Allgemeine Anforderungen - Betriebsgeräte
commande (IEC 62386-102:2014)
(CEI 62386-102:2014)
This European Standard was approved by CENELEC on 2014-12-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 62386-102:2014 E
---------------------- Page: 3 ----------------------
SIST EN 62386-102:2015
EN 62386-102:2014 - 2 -
Foreword
The text of document 34C/1099/FDIS, future edition 2 of IEC 62386-102, prepared by
SC 34C "Auxiliaries for lamps" of IEC/TC 34 "Lamps and related equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62386-102:2014.
The following dates are fixed:
(dop) 2015-09-12
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2017-12-12
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62386-102:2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 62386-102:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60598-1 NOTE Harmonized as EN 60598-1.
IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1.
IEC 60921 NOTE Harmonized as EN 60921.
IEC 60923 NOTE Harmonized as EN 60923.
1) 1)
IEC 60925 NOTE Harmonized as EN 60925 .
IEC 61547 NOTE Harmonized as EN 61547.
IEC 62386-102:2009 NOTE Harmonized as EN 62386-102:2009.
CISPR 15 NOTE Harmonized as EN 55015.
1)
Withdrawn publication.
---------------------- Page: 4 ----------------------
SIST EN 62386-102:2015
- 3 - EN 62386-102:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu
Publication Year Title EN/HD Year
IEC 61347 Series Lamp controlgear EN 61347 Series
IEC 62386-101 2014 Digital addressable lighting interface - EN 62386-101 2014
Part 101: General requirements - System
Components
IEC 62386-103 2014 Digital addressable lighting interface - EN 62386-103 2014
Part 103: General requirements - Control
devices
---------------------- Page: 5 ----------------------
SIST EN 62386-102:2015
---------------------- Page: 6 ----------------------
SIST EN 62386-102:2015
IEC 62386-102
®
Edition 2.0 2014-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Digital addressable lighting interface –
Part 102: General requirements – Control gear
Interface d’éclairage adressable numérique –
Partie 102: Exigences générales – Appareillages de commande
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XH
ICS 29.140, 29.140.50 ISBN 978-2-8322-1906-5
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN 62386-102:2015
– 2 – IEC 62386-102:2014 © IEC 2014
CONTENTS
FOREWORD . 12
INTRODUCTION . 14
1 Scope . 15
2 Normative references . 15
3 Terms and definitions . 15
4 General . 18
4.1 General . 18
4.2 Version number . 18
5 Electrical specification . 18
6 Interface power supply . 18
7 Transmission protocol structure . 19
7.1 General . 19
7.2 16 bit forward frame encoding . 19
7.2.1 General . 19
7.2.2 Address byte . 19
7.2.3 Opcode byte . 19
8 Timing . 19
9 Method of operation . 20
9.1 General . 20
9.2 Control gear . 20
9.3 Dimming curve . 20
9.4 Calculating “targetLevel” . 23
9.5 Fading . 23
9.5.1 General . 23
9.5.2 Fade time . 24
9.5.3 Fade rate . 25
9.5.4 Extended fade time . 26
9.5.5 Using the fade time . 28
9.5.6 Using the fade rate . 28
9.5.7 Behaviour during a fade . 28
9.5.8 Behaviour during startup . 28
9.5.9 Stopping a fade . 28
9.6 Min and max level . 29
9.7 Commands . 29
9.7.1 General . 29
9.7.2 Level instructions without fade . 30
9.7.3 Level instructions initiating a fade . 30
9.7.4 Configuration instructions . 30
9.7.5 Queries . 30
9.7.6 Special commands . 31
9.7.7 Application extended commands. 31
9.8 Command iterations . 31
9.8.1 General . 31
9.8.2 Command iteration of “UP” and “DOWN” commands . 31
9.8.3 DAPC SEQUENCE (deprecated) . 31
---------------------- Page: 8 ----------------------
SIST EN 62386-102:2015
IEC 62386-102:2014 © IEC 2014 – 3 –
9.9 Modes of operation . 32
9.9.1 General . 32
9.9.2 Operating mode 0x00: standard mode . 32
9.9.3 Operating mode 0x01 to 0x7F: reserved . 32
9.9.4 Operating mode 0x80 to 0xFF: manufacturer specific modes . 32
9.10 Memory banks . 33
9.10.1 General . 33
9.10.2 Memory map . 33
9.10.3 Selecting a memory bank location . 34
9.10.4 Memory bank reading . 34
9.10.5 Memory bank writing . 34
9.10.6 Memory bank 0 . 35
9.10.7 Memory bank 1 . 37
9.10.8 Manufacturer specific memory banks . 39
9.10.9 Reserved memory banks . 39
9.11 Reset . 39
9.11.1 Reset operation . 39
9.11.2 Reset memory bank operation . 39
9.12 System failure . 39
9.13 Power on . 40
9.14 Assigning short addresses . 41
9.14.1 General . 41
9.14.2 Random address allocation . 41
9.14.3 Identification of a device . 42
9.14.4 Direct address allocation . 43
9.15 Failure state behaviour . 43
9.16 Status information . 43
9.16.1 General . 43
9.16.2 Bit 0: Control gear failure . 43
9.16.3 Bit 1: Lamp failure . 44
9.16.4 Bit 2: Lamp on . 44
9.16.5 Bit 3: Limit error . 44
9.16.6 Bit 4: Fade running . 44
9.16.7 Bit 5: Reset state . 44
9.16.8 Bit 6: Missing short address . 44
9.16.9 Bit 7: Power cycle seen . 45
9.17 Non-volatile memory . 45
9.18 Device types and features . 45
9.19 Using scenes . 46
10 Declaration of variables . 47
11 Definition of commands . 49
11.1 General . 49
11.2 Overview Sheets . 49
11.3 Level instructions . 55
11.3.1 DAPC (level) . 55
11.3.2 OFF . 55
11.3.3 UP . 55
11.3.4 DOWN . 55
11.3.5 STEP UP . 55
---------------------- Page: 9 ----------------------
SIST EN 62386-102:2015
– 4 – IEC 62386-102:2014 © IEC 2014
11.3.6 STEP DOWN . 56
11.3.7 RECALL MAX LEVEL . 56
11.3.8 RECALL MIN LEVEL . 56
11.3.9 STEP DOWN AND OFF . 57
11.3.10 ON AND STEP UP . 57
11.3.11 ENABLE DAPC SEQUENCE . 57
11.3.12 GO TO LAST ACTIVE LEVEL . 58
11.3.13 GO TO SCENE (sceneNumber) . 58
11.4 Configuration instructions . 58
11.4.1 General . 58
11.4.2 RESET . 58
11.4.3 STORE ACTUAL LEVEL IN DTR0 . 58
11.4.4 SAVE PERSISTENT VARIABLES . 58
11.4.5 SET OPERATING MODE (DTR0) . 59
11.4.6 RESET MEMORY BANK (DTR0) . 59
11.4.7 IDENTIFY DEVICE . 59
11.4.8 SET MAX LEVEL (DTR0) . 60
11.4.9 SET MIN LEVEL (DTR0) . 60
11.4.10 SET SYSTEM FAILURE LEVEL (DTR0) . 60
11.4.11 SET POWER ON LEVEL (DTR0) . 61
11.4.12 SET FADE TIME (DTR0) . 61
11.4.13 SET FADE RATE (DTR0) . 61
11.4.14 SET EXTENDED FADE TIME (DTR0) . 61
11.4.15 SET SCENE (DTR0, sceneX) . 62
11.4.16 REMOVE FROM SCENE (sceneX) . 62
11.4.17 ADD TO GROUP (group) . 62
11.4.18 REMOVE FROM GROUP (group) . 62
11.4.19 SET SHORT ADDRESS (DTR0) . 62
11.4.20 ENABLE WRITE MEMORY . 63
11.5 Queries . 63
11.5.1 General . 63
11.5.2 QUERY STATUS . 63
11.5.3 QUERY CONTROL GEAR PRESENT . 63
11.5.4 QUERY CONTROL GEAR FAILURE . 63
11.5.5 QUERY LAMP FAILURE . 63
11.5.6 QUERY LAMP POWER ON . 63
11.5.7 QUERY LIMIT ERROR . 63
11.5.8 QUERY RESET STATE . 63
11.5.9 QUERY MISSING SHORT ADDRESS . 63
11.5.10 QUERY VERSION NUMBER . 64
11.5.11 QUERY CONTENT DTR0 . 64
11.5.12 QUERY DEVICE TYPE . 64
11.5.13 QUERY NEXT DEVICE TYPE . 64
11.5.14 QUERY PHYSICAL MINIMUM . 64
11.5.15 QUERY POWER FAILURE . 64
11.5.16 QUERY CONTENT DTR1 . 64
11.5.17 QUERY CONTENT DTR2 . 64
11.5.18 QUERY OPERATING MODE . 65
11.5.19 QUERY LIGHT SOURCE TYPE . 65
---------------------- Page: 10 ----------------------
SIST EN 62386-102:2015
IEC 62386-102:2014 © IEC 2014 – 5 –
11.5.20 QUERY ACTUAL LEVEL . 65
11.5.21 QUERY MAX LEVEL . 65
11.5.22 QUERY MIN LEVEL . 66
11.5.23 QUERY POWER ON LEVEL . 66
11.5.24 QUERY SYSTEM FAILURE LEVEL . 66
11.5.25 QUERY FADE TIME/FADE RATE . 66
11.5.26 QUERY EXTENDED FADE TIME . 66
11.5.27 QUERY MANUFACTURER SPECIFIC MODE . 66
11.5.28 QUERY SCENE LEVEL (sceneX) . 66
11.5.29 QUERY GROUPS 0-7 . 66
11.5.30 QUERY GROUPS 8-15 . 66
11.5.31 QUERY RANDOM ADDRESS (H) . 67
11.5.32 QUERY RANDOM ADDRESS (M) . 67
11.5.33 QUERY RANDOM ADDRESS (L) . 67
11.5.34 READ MEMORY LOCATION (DTR1, DTR0) . 67
11.6 Application extended commands . 67
11.6.1 General . 67
11.6.2 QUERY EXTENDED VERSION NUMBER . 67
11.7 Special commands . 68
11.7.1 General . 68
11.7.2 TERMINATE . 68
11.7.3 DTR0 (data) . 68
11.7.4 INITIALISE (device) . 68
11.7.5 RANDOMISE . 68
11.7.6 COMPARE . 69
11.7.7 WITHDRAW . 69
11.7.8 SEARCHADDRH (data) . 69
11.7.9 SEARCHADDRM (data) . 69
11.7.10 SEARCHADDRL (data) . 69
11.7.11 PROGRAM SHORT ADDRESS (data) . 70
11.7.12 VERIFY SHORT ADDRESS (data) . 70
11.7.13 QUERY SHORT ADDRESS . 70
11.7.14 ENABLE DEVICE TYPE (data) . 70
11.7.15 DTR1 (data) . 71
11.7.16 DTR2 (data) . 71
11.7.17 WRITE MEMORY LOCATION (DTR1, DTR0, data) . 71
11.7.18 WRITE MEMORY LOCATION – NO REPLY (DTR1, DTR0, data) . 71
11.7.19 PING . 72
12 Test procedures . 72
12.1 General notes on test. 72
12.1.1 Abbreviations. 72
12.1.2 Test execution . 72
12.1.3 Data transmission . 72
12.1.4 Test setup . 73
12.1.5 Test output . 73
12.1.6 Fade time measurements based on light output . 73
12.1.7 Description of test scheme for fast fade times on PWM dimmer . 74
12.1.8 Test notation . 75
12.1.9 Test execution limitation . 75
---------------------- Page: 11 ----------------------
SIST EN 62386-102:2015
– 6 – IEC 62386-102:2014 © IEC 2014
12.1.10 Test results . 75
12.1.11 Exception handling .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.