SIST EN IEC 62343:2023/oprA1:2025
(Amendment)Amendment 1 - Dynamic modules - Generic specification
Amendment 1 - Dynamic modules - Generic specification
Dynamische Module - Fachgrundspezifikation
Amendement 1 - Modules dynamiques - Spécification générique
Dinamični moduli - Splošna specifikacija - Dopolnilo A1
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-oktober-2025
Dinamični moduli - Splošna specifikacija - Dopolnilo A1
Amendment 1 - Dynamic modules - Generic specification
Dynamische Module - Fachgrundspezifikation
Amendement 1 - Modules dynamiques - Spécification générique
Ta slovenski standard je istoveten z: EN IEC 62343:2023/prA1:2025
ICS:
33.180.01 Sistemi z optičnimi vlakni na Fibre optic systems in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
86C/1983/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62343/AMD1 ED3
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-08-08 2025-10-31
SUPERSEDES DOCUMENTS:
86C/1971/CD, 86C/1981/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS, SENSING AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries”
clauses to be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for
submitting ISC clauses. (SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Amendment 1 - Dynamic modules - Generic specification
PROPOSED STABILITY DATE: 2029
NOTE FROM TC/SC OFFICERS:
this electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee
positions. You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other
purpose without permission in writing from IEC.
IEC CDV 62343/AMD1 © IEC 2025
1 INTERNATIONAL ELECTROTECHNICAL COMMISSION
2 ____________
4 DYNAMIC MODULES – GENERIC SPECIFICATION
6 AMENDMENT 1
8 FOREWORD
9 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
10 national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
11 operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
12 to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
13 Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
14 entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
15 this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
16 participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
17 in accordance with conditions determined by agreement between the two organizations.
18 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
19 consensus of opinion on the relevant subjects since each technical committee has representation from all interested
20 IEC National Committees.
21 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
22 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
23 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
24 by any end user.
25 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
26 transparently to the maximum extent possible in their national and regional publications. Any divergence between any
27 IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
28 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
29 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
30 carried out by independent certification bodies.
31 6) All users should ensure that they have the latest edition of this publication.
32 7) No liability sha
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.