Railway applications - Tank wagons - Part 7: Platforms and ladders

This European Standard applies to ladders, platforms and walkways on tank wagons fitted with top devices. It does not apply to crossing gangways nor to steps in so far as they are covered by UIC leaflets. This European Standard defines the important dimensions for manufacturers and operators of such tank wagons and takes into consideration the relevant and applicable construction and safety guidelines.

Bahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnen und Leitern

Applications ferroviaires - Wagons-citernes - Partie 7 : Plates-formes et échelles

Cette Norme européenne s'applique aux échelles, plates-formes et passerelles montées sur les wagons citernes pourvus d'équipement en haut de la citerne. Elle ne s'applique pas aux plates-formes de franchissement et aux marchepieds lorsque ceux-ci font l'objet d'une fiche UIC. Elle définit les dimensions essentielles pour les constructeurs et les exploitants de ces wagons-citernes et tient compte des recommandations de construction et de sécurité applicables et en vigueur.

Železniške naprave - Vagoni-cisterne - 7. del: Delovni odri (ploščadi) in lestve

General Information

Status
Withdrawn
Publication Date
31-Aug-2004
Withdrawal Date
12-Sep-2011
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
06-Sep-2011
Due Date
29-Sep-2011
Completion Date
13-Sep-2011

Relations

Buy Standard

Standard
EN 12561-7:2004
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnen und LeiternApplications ferroviaires - Wagons-citernes - Partie 7 : Plates-formes et échellesRailway applications - Tank wagons - Part 7: Platforms and ladders45.060.20Železniški vagoniTrailing stockICS:Ta slovenski standard je istoveten z:EN 12561-7:2004SIST EN 12561-7:2004en01-september-2004SIST EN 12561-7:2004SLOVENSKI
STANDARD



SIST EN 12561-7:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12561-7February 2004ICS 45.060.20English versionRailway applications - Tank wagons - Part 7: Platforms andladdersApplications ferroviaires - Wagons-citernes - Partie 7 :Plates-formes et échellesBahnanwendungen - Kesselwagen - Teil 7: Arbeitsbühnenund LeiternThis European Standard was approved by CEN on 3 November 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12561-7:2004: ESIST EN 12561-7:2004



EN 12561-7:2004 (E)2ContentspageForeword.31Scope.52Normative references.53Terms and definitions.54Ladders.54.1General.54.2Main dimensions.64.3Design values.74.4Marking.75Platforms.95.1General.95.2Main dimensions.95.3Design values.96Walkways.106.1General.106.2Main dimensions.106.3Design values.107Characteristics of the grating.107.1Resistance to friction.107.2Grating structure.108Fixing.10Bibliography.11SIST EN 12561-7:2004



EN 12561-7:2004 (E)3ForewordThis document (EN 12561-7:2004) has been prepared by Technical Committee CEN /TC 256 "RailwayApplications", the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identicaltext or by endorsement, at the latest by August 2004, and conflicting national standards shall be withdrawnat the latest by August 2004.This document has been prepared under a mandate given to CEN by the European Commission and theEuropean Free Trade Association, and supports the objectives of the framework Directives on Transport ofDangerous Goods.This European Standard has been submitted for reference into the RID and/or in the technical annexes ofthe ADR.
Therefore in this context the standards listed in the normative references and covering basicrequirements of the RID/ADR not addressed within the present standard are normative only when thestandards themselves are referred to in the RID and/or in the technical annexes of the ADR.This document is in compliance with the following regulations being in force on the date of approval of thisEN:¾ Regulations concerning the International carriage of Dangerous goods by rail (RID) 1)¾ Regulations governing the reciprocal use of wagons in international traffic (RIV) 2)This document therefore supports essential requirements of¾ Council Directive 96/49/EC of 23 July 1996 on the approximation of the laws of the Member States withregard to the transport of dangerous goods by rail 3) due to the fact that RID forms an integral part of thisDirective.¾ Council Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-european highspeed railsystem 4)¾ Council Directive 93/38/EEC of 14 June 1993 co-ordinating the procurement procedures of entitiesoperating in the water, energy, transport and telecommunications sectors 5)¾ Council Directive 91/440/EEC of 29 July 1991 on the development of the community railways 6)
1)May be purchased from: OTIF, Gryphenhübeliweg 30, CH-3006 Bern2)May be purchased from: UIC Bureau RIV-RIC, 16 rue Jean Rey, F-75015 Paris3)Official Journal of the European Communities N° L 235 of 17.09.964)Official Journal of the European Communities N° L 235 of 17.9.965)Official Journal of the European Communities N° L 199 of 09.08.936)Official Journal of the European Communities N° L 237 of 24.08.91SIST EN 12561-7:2004



EN 12561-7:2004 (E)4This series of European Standards "Railway applications - Tank wagons" consists of:¾ Part 1:Marking of tank wagons for the carriage of dangerous goods¾ Part 2:Bottom emptying devices for liquid products including vapour return¾ Part 3:Bottom filling and emptying devices for gases liquefied under pressure¾ Part 4:Top devices for top emptying and filling of liquid products¾ Part 5:Top devices for bottom emptying and top filling of liquid products¾ Part 6:Manholes¾ Part 7:Platforms and ladders¾ Part 8:Heating connectionsAccording to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,Denmark, Estonia,
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.