SIST EN 572-5:2012

Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass

This European Standard specifies dimensional and minimum quality requirements (in respect of visual and pattern faults) for patterned glass as defined in FprEN 572-1:2011, for use in building. This European Standard applies only to patterned glass supplied in rectangular panes and in stock sizes. EN 572-8 gives information on patterned glass in sizes other than those covered by this European Standard.

Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 5: Ornamentglas

Diese Europäische Norm legt die Anforderungen an Maße und Mindestqualität (in Bezug auf sichtbare Fehler und Fehler im Dessin) für Ornamentglas für das Bauwesen, wie es in FprEN 572 1:2011 definiert ist, fest.
Diese Europäische Norm gilt nur für Ornamentglas, das in rechtwinkligen Scheiben und Standardab-messungen geliefert wird.
EN 572 8 informiert über Ornamentglas in anderen als in dieser Europäischen Norm aufgeführten Abmessungen.

Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 5: Verre imprimé

La présente Norme européenne détermine les spécifications dimensionnelles et les spécifications qualitatives minimales (concernant les défauts d'aspect et de dessin) du verre imprimé, tel que défini dans le EN 572-1:2012, pour l'utilisation dans la construction.
La présente Norme européenne ne s'applique qu'au verre imprimé fourni en feuilles rectangulaires et en dimensions standard.
L’EN 572-8 fournit des informations sur le verre imprimé dans des dimensions autres que celles couvertes par la présente Norme européenne.

Steklo v gradbeništvu - Osnovni izdelki iz natrij-kalcijevega silikatnega stekla - 5. del: Vzorčasto steklo

Ta evropski standard določa zahteve glede mer in minimalne kakovosti (v zvezi z optičnimi in vizualnimi napakami) za vzorčasto steklo, kot je določeno v standardu FprEN 572-1:2011, za uporabo v gradbeništvu. Ta evropski standard se nanaša le na vzorčasto steklo, dobavljeno kot pravokotno steklo in v velikostih na zalogi. EN 572-8 vsebuje informacije o vzorčastem steklu, razen za velikosti, vključene v tem evropskem standardu.

General Information

• Status: Published
• Public Enquiry End Date: 28-Feb-2012
• Publication Date: 25-Sep-2012
• ICS: 81.040.20 - Glass in building
• Technical Committee: STV - Steklo, svetloba in razsvetljava v gradbeništvu
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 27-Jul-2012
• Due Date: 01-Oct-2012
• Completion Date: 26-Sep-2012
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: EN 572-5:2012 - Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass

Relations

• Replaces: SIST EN 572-5:2004 - Glass in Building - Basic soda lime silicate glass products - Part 5: Patterned glass
• Effective Date: 01-Oct-2012
• Replaces: SIST EN 572-5:2004 - Glass in Building - Basic soda lime silicate glass products - Part 5: Patterned glass
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 572-5:2012
01-oktober-2012
1DGRPHãþD
SIST EN 572-5:2004
6WHNORYJUDGEHQLãWYX2VQRYQLL]GHONLL]QDWULMNDOFLMHYHJDVLOLNDWQHJDVWHNOD
GHO9]RUþDVWRVWHNOR
Glass in building - Basic soda lime silicate glass products - Part 5: Patterned glass
Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 5: Ornamentglas
Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 5:
Verre imprimé
Ta slovenski standard je istoveten z: EN 572-5:2012
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN 572-5:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 572-5:2012

---------------------- Page: 2 ----------------------

SIST EN 572-5:2012


EUROPEAN STANDARD
EN 572-5

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2012
ICS 81.040.20 Supersedes EN 572-5:2004
English Version
Glass in building - Basic soda lime silicate glass products - Part
2: Patterned glass
Verre dans la construction - Produits de base: verre de Glas im Bauwesen - Basiserzeugnisse aus Kalk-
silicate sodo-calcique - Partie 5: Verre imprimé Natronsilicatglas - Teil 5: Ornamentglas
This European Standard was approved by CEN on 11 May 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 572-5:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 572-5:2012
EN 572-5:2012 (E)
Contents Page
Foreword .3
1 Scope .4
2 Normative references .4
3 Terms and definitions .4
4 Dimensional requirements .5
4.1 Thickness .5
4.1.1 General .5
4.1.2 Tolerances .5
4.2 Length, width and squareness .6
5 Quality requirements .7
5.1 General .7
5.2 Methods of observation and measurement .7
5.2.1 Spot and linear/extended faults .7
5.2.2 Pattern faults .7
5.3 Acceptance levels .8
5.3.1 Spot faults .8
5.3.2 Linear/extended faults .8
5.3.3 Pattern faults .8
6 Designation .9
Bibliography . 10

2

---------------------- Page: 4 ----------------------

SIST EN 572-5:2012
EN 572-5:2012 (E)
Foreword
This document (EN 572-5:2012) has been prepared by Technical Committee CEN/TC 129 “Glass in building”,
the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by January 2013, and conflicting national standards shall be withdrawn at
the latest by January 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 572-5:2004.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This edition is a revision of EN 572-5:2004. The main change in this edition is a new method of determination
of squareness.
This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following
parts:
 Part 1: Definitions and general physical and mechanical properties;
 Part 2: Float glass;
 Part 3: Polished wired glass;
 Part 4: Drawn sheet glass;
 Part 5: Patterned glass;
 Part 6: Wired patterned glass;
 Part 7: Wired or unwired channel shaped glass;
 Part 8: Supplied and final cut sizes;
 Part 9: Evaluation of conformity/Product standard.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Sloven
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 5: OrnamentglasVerre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 5: Verre impriméGlass in building - Basic soda lime silicate glass products - Part 5: Patterned glass81.040.20Steklo v gradbeništvuGlass in buildingICS:Ta slovenski standard je istoveten z:FprEN 572-5kSIST FprEN 572-5:2012en,fr,de01-januar-2012kSIST FprEN 572-5:2012SLOVENSKI
STANDARD



kSIST FprEN 572-5:2012



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 572-5
November 2011 ICS 81.040.20 Will supersede EN 572-5:2004English Version
Glass in building - Basic soda lime silicate glass products - Part 2: Patterned glass
Verre dans la construction - Produits de base: verre de silicate sodo-calcique - Partie 5: Verre imprimé
Glas im Bauwesen - Basiserzeugnisse aus Kalk-Natronsilicatglas - Teil 5: Ornamentglas This draft European Standard is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee CEN/TC 129.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. FprEN 572-5:2011: EkSIST FprEN 572-5:2012



FprEN 572-5:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Dimensional requirements .54.1 Thickness .54.1.1 General .54.1.2 Tolerances .64.2 Length, width and squareness .65 Quality requirements .75.1 General .75.2 Methods of observation and measurement .75.2.1 Spot and linear/extended faults .75.2.2 Pattern faults .85.3 Acceptance levels .85.3.1 Spot faults .85.3.2 Linear/extended faults .85.3.3 Pattern faults .86 Designation .9Bibliography . 10 kSIST FprEN 572-5:2012



FprEN 572-5:2011 (E) 3 Foreword This document (FprEN 572-5:2011) has been prepared by Technical Committee CEN/TC 129 “Glass in building”, the secretariat of which is held by NBN. This document is currently submitted to the Unique Acceptance Procedure. This document will supersede EN 572-5:2004. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). This European Standard “Glass in building — Basic soda lime silicate glass products” consists of the following parts:  Part 1: Definitions and general physical and mechanical properties;  Part 2: Float glass;  Part 3: Polished wired glass;  Part 4: Drawn sheet glass;  Part 5: Patterned glass;  Part 6: Wired patterned glass;  Part 7: Wired or unwired channel shaped glass;  Part 8: Supplied and final cut sizes;  Part 9: Evaluation of conformity/Product standard.
kSIST FprEN 572-5:2012



FprEN 572-5:2011 (E) 4 1 Scope This European Standard specifies dimensional and
...