SIST EN 61340-5-3:2010

Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices (IEC 61340-5-3:2010)

This part of IEC 61340 defines the ESD protective packaging properties needed to protect electrostatic discharge sensitive devices (ESDS) through all phases of production, transport and storage. Test methods are referenced to evaluate packaging and packaging materials for these product and material properties. Performance limits are provided. This standard does not address protection from electromagnetic interference (EMI), radio frequency interference (RFI), electromagnetic pulsing (EMP) nor protection of volatile materials.

Elektrostatik - Teil 5-3: Schutz von elektronischen Bauelementen gegen elektrostatische Phänomene - Eigenschaften und Anforderungen für die Klassifizierung von Verpackungen welche für Bauelemente verwendet werden, die gegen elektrostatische Entladungen empfindlich sind (IEC 61340-5-3:2010)

Electrostatique - Partie 5-3: Protection des dispositifs électroniques contre les phénomènes électrostatiques - Classifications des propriétés et des exigences relatives à l'emballage destiné aux dispositifs sensibles aux décharges électrostatiques (CEI 61340-5-3:2010)

La CEI 61340-5-3:2010 définit les propriétés des emballages de protection contre les ESD nécessaires pour protéger les dispositifs sensibles aux décharges électrostatiques (ESDS) pendant toutes les phases de production, de transport et de stockage. Les méthodes d'essai sont référencées pour évaluer les emballages et les matériaux d'emballages concernant les propriétés de ces produits et matériaux. Des limites de performance sont données. La présente norme ne traite pas de la protection contre les interférence électromagnétiques (EMI), les interférence radioélectriques (RFI), les impulsions électromagnétiques (EMP) ou la protection des matériaux volatiles.

Elektrostatika - 5-3. del: Zaščita elektronskih naprav pred elektrostatičnimi pojavi - Lastnosti in klasifikacija zahtev za embalažo naprav, ki so občutljive za elektrostatične razelektritve (IEC 61340-5-3:2010)

Ta del IEC 61340 določa lastnosti embalaže za zaščito pred elektrostatično razelektritvijo, ki je potrebna za zaščito naprav, ki so občutljive za elektrostatične razelektritve (ESDS) skozi vse faze proizvodnje, prevoza in skladiščenja.  Navaja se sklic na preskusne metode, s katerimi se ovrednoti embalaža in embalažni materiali za te proizvode, ter lastnosti materiala. Podane so meje učinkovitosti. Ta standard ne obravnava zaščite pred elektromagnetnimi motnjami (EMI), radiofrekvenčnimi motnjami (RFI), elektromagnetnimi udari (EMP) niti zaščite hlapnih materialov.

General Information

• Status: Withdrawn
• Publication Date: 18-Jul-2010
• Withdrawal Date: 16-Sep-2018
• ICS: 17.220.99 - Other standards related to electricity and magnetism
• Technical Committee: I09 - Imaginarni 09
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 13-Sep-2018
• Due Date: 06-Oct-2018
• Completion Date: 17-Sep-2018
• Ref Project: EN 61340-5-3:2010 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices

Relations

• Replaced By: SIST EN 61340-5-3:2015 - Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices
• Effective Date: 01-Dec-2015

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61340-5-3:2010
01-september-2010
(OHNWURVWDWLNDGHO=DãþLWDHOHNWURQVNLKQDSUDYSUHGHOHNWURVWDWLþQLPLSRMDYL
/DVWQRVWLLQNODVLILNDFLMD]DKWHY]DHPEDODåRQDSUDYNLVRREþXWOMLYH]D
HOHNWURVWDWLþQHUD]HOHNWULWYH,(&
Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena -
Properties and requirements classifications for packaging intended for electrostatic
discharge sensitive devices (IEC 61340-5-3:2010)
Elektrostatik - Teil 5-3: Schutz von elektronischen Bauelementen gegen elektrostatische
Phänomene - Eigenschaften und Anforderungen für die Klassifizierung von
Verpackungen welche für Bauelemente verwendet werden, die gegen elektrostatische
Entladungen empfindlich sind (IEC 61340-5-3:2010)
Electrostatique - Partie 5-3: Protection des dispositifs électroniques contre les
phénomènes électrostatiques - Classifications des propriétés et des exigences relatives
à l'emballage destiné aux dispositifs sensibles aux décharges électrostatiques (CEI
61340-5-3:2010)
Ta slovenski standard je istoveten z: EN 61340-5-3:2010
ICS:
17.220.99 Drugi standardi v zvezi z Other standards related to
elektriko in magnetizmom electricity and magnetism
SIST EN 61340-5-3:2010 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61340-5-3:2010

---------------------- Page: 2 ----------------------

SIST EN 61340-5-3:2010

EUROPEAN STANDARD
EN 61340-5-3

NORME EUROPÉENNE
May 2010
EUROPÄISCHE NORM

ICS 17.220.99; 29.020


English version


Electrostatics -
Part 5-3: Protection of electronic devices from electrostatic phenomena -
Properties and requirements classifications for packaging intended
for electrostatic discharge sensitive devices
(IEC 61340-5-3:2010)


Electrostatique -  Elektrostatik -
Partie 5-3: Protection des dispositifs Teil 5-3: Schutz von elektronischen
électroniques contre les phénomènes Bauelementen gegen elektrostatische
électrostatiques - Phänomene -
Classifications des propriétés Eigenschaften und Anforderungen
et des exigences relatives à l'emballage für die Klassifizierung von Verpackungen
destiné aux dispositifs sensibles welche für Bauelemente verwendet
aux décharges électrostatiques werden, die gegen elektrostatische
(CEI 61340-5-3:2010) Entladungen empfindlich sind
(IEC 61340-5-3:2010)


This European Standard was approved by CENELEC on 2010-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61340-5-3:2010 E

---------------------- Page: 3 ----------------------

SIST EN 61340-5-3:2010
EN 61340-5-3:2010 - 2 -
Foreword
The text of document 101/295/FDIS, future edition 1 of IEC 61340-5-3, prepared by IEC TC 101,
Electrostatics, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61340-5-3 on 2010-05-01.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-02-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2013-05-01
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61340-5-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
[2] IEC 61340-5-1 NOTE  Harmonized as EN 61340-5-1.
[3] IEC/TR 61340-5-2 NOTE  Harmonized as CLC/TR 61340-5-2.
[4] IEC 61340-3-1 NOTE  Harmonized as EN 61340-3-1.
[5] IEC 61340-3-2 NOTE  Harmonized as EN 61340-3-2.
__________

---------------------- Page: 4 ----------------------

SIST EN 61340-5-3:2010
- 3 - EN 61340-5-3:2010
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

IEC 61340-2-3 - Electrostatics - EN 61340-2-3 -
Part 2-3: Methods of test for determining the
resistance and resistivity of solid planar
materials used to avoid electrostatic charge
accumulation


IEC 61340-4-8 - Electrostatics - - -
Part 4-8: Standard test methods for specific
applications - Discharge shielding - Bags


ANSI/ESD STM 11.13 - Two-point resistance measurement - -

---------------------- Page: 5 ----------------------

SIST EN 61340-5-3:2010

---------------------- Page: 6 ----------------------

SIST EN 61340-5-3:2010
IEC 61340-5-3
®
Edition 1.0 2010-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Electrostatics –
Part 5-3: Protection of electronic devices from electrostatic phenomena –
Properties and requirements classification for packaging intended for
electrostatic discharge sensitive devices

Electrostatique –
Partie 5-3: Protection des dispositifs électroniques contre les phénomènes
électrostatiques – Classification des propriétés et des exigences relatives à
l'emballage destiné aux dispositifs sensibles aux décharges électrostatiques

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
R
CODE PRIX
ICS 17.220.99; 29.020 ISBN 2-8318-1383-7
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61340-5-3:2010
– 2 – 61340-5-3 © IEC:2010
CONTENTS
FOREWORD.3
INTRODUCTION.5
1 Scope.6
2 Normative references .6
3 Terms and definitions .6
4 Tailoring .7
5 Packaging application requirement .7
5.1 General .7
5.2 Inside an EPA .7
5.3 Outside an EPA.8
6 Classification of ESD packaging material properties .8
6.1 General .8
6.2 Material resistance properties .8
6.2.1 Resistance of conductive materials.8
6.2.2 Resistance of electrostatic field shielding materials .8
6.2.3 Resistance of dissipative materials.9
6.2.4 Resistance of insulative materials.9
6.3 Material electrostatic shielding properties.9
6.3.1 Electrostatic discharge shielding .9
6.3.2 Electrostatic field shielding .9
7 Technical requirements for ESD protective packaging .9
7.1 Packaging and material properties .9
7.2 Packaging marking .9
7.2.1 Classification symbol .9
7.2.2 Packaging classification .9
7.2.3 Traceability.9
Annex A (informative) ESD packaging material guidance .13
Annex B (informative) Device damage .17
Bibliography.18

Figure 1 – Example of packaging label.10
Figure 2 – Examples of EPA configurations .12
Figure A.1 – Application of ESD protective packaging.15

10
Table 1 – Test methods for electrostatic protective packaging .
Table 2 – Test methods and requirements for electrostatic discharge shielding
packaging .11
Table A.1 – Packaging characteristics for environmental consideration.13
Table A.2 – Examples for qualification and verification of packaging.16

---------------------- Page: 8 ----------------------

SIST EN 61340-5-3:2010
61340-5-3 © IEC:2010 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

ELECTROSTATICS –

Part 5-3: Protection of electronic devices from electrostatic phenomena –
Properties and requirements classification for packaging intended for
electrostatic discharge sensitive devices


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61340-5-3 has been prepared by IEC technical committee 101:
Electrostatics.
The text of this standard is based on the following documents:
FDIS Report on voting
101/295/FDIS 101/302/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 9 ----------------------

SIST EN 61340-5-3:2010
– 4 – 61340-5-3 © IEC:2010
1
This standard was written based on the ESD Association Standard ANSI/ESD S541-2003 [1]
with some modification in relation to IEC 61340-5-1:2007 [2] and IEC/TR 61340-5-2:2007 [3].
A list of all parts in the IEC 61340 series, under the general title Electrostatics, can be found
on the IEC website
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC web site under
"http://webstore.iec.ch" in the data related to the specific publication. At this date, the
publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

—————————
1
 References in square brackets refer to the bibliography.

---------------------- Page: 10 ----------------------

SIST EN 61340-5-3:2010
61340-5-3 © IEC:2010 – 5 –
INTRODUCTION
Packaging is necessary to protect electrostatic discharge sensitive devices (ESDS) from
physical and environmental damage during manufacture, transportation and storage.
Additionally, packaging for ESDS should also prevent damage from static electricity.

---------------------- Page: 11 ----------------------

SIST EN 61340-5-3:2010
– 6 – 61340-5-3 © IEC:2010
ELECTROSTATICS –

Part 5-3: Protection of electronic devices from electrostatic phenomena –
Properties and requirements classification for packaging intended for
electrostatic discharge sensitive devices



1 Scope
This part of IEC 61340 defines the ESD protective packaging properties needed to protect
electrostatic discharge sensitive devices (ESDS) through all phases of production, transport
and storage. Test methods are referenced to evaluate packaging and packaging materials for
these product and material properties. Performance limits are provided.
This standard does not address protection from electromagnetic interference (EMI), radio
frequency interference (RFI), electromagnetic pulsing (EMP) nor protection of volatile
materials.
2 Normative references
The following referenced documents are indispensable for the application of this document.
For dated references, only the edition cited applies. For undated references, the latest edition
of the referenced document (including any amendments) a
...