Semiconductor devices - Semiconductor interface for human body communication - Part 3: Functional type and its operational conditions (IEC 62779-3:2016)

This part of IEC 62779 series defines a functional type of a semiconductor interface for
human body communication (HBC). An interface for HBC includes an electrode that is
physical structure to transmit a data signal to the human body or receive a transmitted data
signal from the body. An electrode directly contacts with the human body in many cases, but it
cannot maintain the contact condition when an object, such as clothes, exists between the
interface and the body or a near field communication is required; hence, depending on the
contact condition, an interface for HBC can be categorized into a contact and non-contact
type as shown in Figure 1. This part includes the categorization of the interface for HBC
according to the contact condition; and performance parameters characterizing the interface
of each category.

Halbleiterbauelemente - Halbleiterschnittstelle zur Kommunikation über den menschlichen Körper - Teil 3: Funktionstyp und seine Betriebsbedingungen

Dispositifs à semiconducteurs - Interface à semiconducteurs pour les communications via le corps humain – Partie 3: Type fonctionnel et ses conditions d'utilisation

L'IEC 62779-3:2016 définit un type fonctionnel d'une interface à semiconducteurs utilisée pour les communications via le corps humain (HBC). La présente partie comprend la catégorisation de l'interface pour les communications via le corps humain selon les conditions de contact ainsi que les paramètres de performance qui caractérisent l'interface de chaque catégorie.

Polprevodniški elementi - Polprevodniški vmesnik za komuniciranje človeškega telesa - 3. del: Funkcijski tip in pogoji za njegovo delovanje (IEC 62779-3:2016)

Ta del skupine standardov IEC 62779 določa funkcijski tip polprevodniškega vmesnika za komuniciranje človeškega telesa (HBC). Vmesnik za komuniciranje človeškega telesa vključuje elektrodo, tj. fizično strukturo za oddajanje podatkovnega signala v človeško telo ali sprejemanje oddajanega podatkovnega signala iz telesa. Elektroda je v številnih primerih v neposrednem stiku s človeškim telesom, ne more pa ohranjati stanja stika, kadar je med vmesnikom in telesom predmet (npr. obleka) ali kadar je potrebna komunikacija bližnjega polja. Odvisno od stanja stika je tako mogoče vmesnik za komuniciranje s človeškim telesom opredeliti kot stični ali brezstični, kot je prikazano na sliki 1. Ta del vključuje opredelitev vmesnika za komuniciranje s človeškim telesom v skladu s stanjem stika in razvrstitev parametrov zmogljivosti, ki označujejo vmesnik posamezne kategorije.

General Information

Status
Published
Publication Date
04-Jul-2016
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
21-Jun-2016
Due Date
26-Aug-2016
Completion Date
05-Jul-2016

Buy Standard

Standard
SIST EN 62779-3:2016 - BARVE na PDF-str 10
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 62779-3:2016
01-september-2016
3ROSUHYRGQLãNLHOHPHQWL3ROSUHYRGQLãNLYPHVQLN]DNRPXQLFLUDQMHþORYHãNHJD
WHOHVDGHO)XQNFLMVNLWLSLQSRJRML]DQMHJRYRGHORYDQMH ,(&

Semiconductor devices - Semiconductor interface for human body communication - Part

3: Functional type and its operational conditions (IEC 62779-3:2016)
Ta slovenski standard je istoveten z: EN 62779-3:2016
ICS:
31.080.01 Polprevodniški elementi Semiconductor devices in
(naprave) na splošno general
SIST EN 62779-3:2016 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 62779-3:2016
---------------------- Page: 2 ----------------------
SIST EN 62779-3:2016
EUROPEAN STANDARD EN 62779-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2016
ICS 31.080.01
English Version
Semiconductor devices - Semiconductor interface for human
body communication - Part 3: Functional type and its operational
conditions
(IEC 62779-3:2016)

Dispositifs à semiconducteurs - Interface à Halbleiterbauelemente - Halbleiterschnittstelle zur

semiconducteurs pour les communications via le corps Kommunikation über den menschlichen Körper -

humain - Partie 3: Type fonctionnel et ses conditions Teil 3: Funktionstyp und seine Betriebsbedingungen

d'utilisation (IEC 62779-3:2016)
(IEC 62779-3:2016)

This European Standard was approved by CENELEC on 2016-05-31. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN 62779-3:2016 E
---------------------- Page: 3 ----------------------
SIST EN 62779-3:2016
EN 62779-3:2016
European foreword

The text of document 47/2282/FDIS, future edition 1 of IEC 62779-3, prepared by IEC/TC 47

"Semiconductor devices" was submitted to the IEC-CENELEC parallel vote and approved by

CENELEC as EN 62779-3:2016.
The following dates are fixed:
(dop) 2017-02-28
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-05-31
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such

patent rights.
Endorsement notice

The text of the International Standard IEC 62779-3:2016 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated :

IEC 62779 NOTE Harmonized in EN 62779 series.
---------------------- Page: 4 ----------------------
SIST EN 62779-3:2016
IEC 62779-3
Edition 1.0 2016-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Semiconductor devices – Semiconductor interface for human body
communication –
Part 3: Functional type and its operational conditions
Dispositifs à semiconducteurs – Interface à semiconducteurs pour les
communications via le corps humain –
Partie 3: Type fonctionnel et ses conditions d’utilisation
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 31.080.01 ISBN 978-2-8322-3298-9

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
SIST EN 62779-3:2016
– 2 – IEC 62779-3:2016 © IEC 2016
CONTENTS

FOREWORD ......................................................................................................................... 3

INTRODUCTION ................................................................................................................... 5

1 Scope ............................................................................................................................ 6

2 Normative references..................................................................................................... 6

3 Terms and definitions .................................................................................................... 6

3.1 Interface type ........................................................................................................ 7

3.2 Detection of HBC interface .................................................................................... 7

3.3 Electromagnetic field coupling ............................................................................... 7

3.4 Essential rating and characteristics........................................................................ 7

3.4.1 Signal transmission ........................................................................................ 7

3.4.2 Signal radiation .............................................................................................. 8

3.5 Other terms and definitions ................................................................................... 8

4 Interface type ................................................................................................................ 9

4.1 General specifications ........................................................................................... 9

4.1.1 Function ........................................................................................................ 9

4.1.2 Implementation ............................................................................................ 10

4.1.3 Compatibility ................................................................................................ 10

4.2 Electrical specifications ....................................................................................... 10

4.2.1 Coupling specifications ................................................................................ 10

4.2.2 Directional specifications .............................................................................. 10

4.2.3 Transient specifications ................................................................................ 11

4.3 Limiting values .................................................................................................... 11

4.3.1 Details to be stated ...................................................................................... 11

4.3.2 Electrical limiting values ............................................................................... 11

4.3.3 Temperatures .............................................................................................. 11

4.3.4 Humidity ...................................................................................................... 11

Bibliography ....................................................................................................................... 12

Figure 1 – HBC interfaces ..................................................................................................... 6

Figure 2 – Block diagram of interface .................................................................................... 9

Table 1 – Coupling specifications of a HBC interface ........................................................... 10

Table 2 – Direction specifications of a HBC interface ........................................................... 11

Table 3 – Transient specifications of a HBC electrode ......................................................... 11

---------------------- Page: 6 ----------------------
SIST EN 62779-3:2016
IEC 62779-3:2016 © IEC 2016 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SEMICONDUCTOR DEVICES –
SEMICONDUCTOR INTERFACE FOR HUMAN BODY COMMUNICATION –
Part 3: Functional type and its operational conditions
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 62779-3 has been prepared by IEC technical committee 47:

Semiconductor devices.
The text of this standard is based on the following documents:
FDIS Report on voting
47/2282/FDIS 47/2292/RVD

Full information on the voting for the approval of this standard can be found in the report on

voting indicated in the above table.

This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.

---------------------- Page: 7 ----------------------
SIST EN 62779-3:2016
– 4 – IEC 62779-3:2016 © IEC 2016

A list of all parts in the IEC 62779 series, published under the general title Semiconductor

devices – Semiconductor interface for human body communication, can be found on the IEC

website.

The committee has decided that the contents of this publication will remain unchanged until

the stability date indicated on the IEC website under "http://webstore.iec.ch" in the data

related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publicati
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.