SIST EN ISO 25745-1:2013

Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification (ISO 25745-1:2012)

This part of ISO 25745 specifies: a) methods of measuring actual energy consumption of lifts, escalators and moving walks on a single unit basis; b) methods of carrying out periodic energy verification checks on lifts, escalators and moving walks in operation. This part of ISO 25745 only considers the energy performance during the operational portion of the life cycle of the lifts, escalators or moving walks. For lifts, this part of ISO 25745 does not cover energy aspects, such as: a) hoistway lighting; b) heating and cooling equipment in the lift car; c) machine room lighting; d) machine room heating, ventilation and air conditioning; e) non-lift, display systems, closed circuit television security cameras, etc.; f) non-lift, monitoring systems (building management systems, etc.); g) the effect of lift group dispatching on energy consumption; h) consumption through the power sockets. For escalators and moving walks, this part of ISO 25745 covers energy aspects of the ancillary equipment, such as: a) lighting with the exception of comb plate lighting and step gap lighting and traffic light; b) cooling and heating; c) alarm devices and emergency battery supplies equipment, etc.

Energieeffizienz von Aufzügen, Fahrtreppen und Fahrsteigen - Teil 1: Energiemessung und Konformität (ISO 25745-1:2012)

Dieser Teil der ISO 25745 legt Folgendes fest:
a) Verfahren zur Messung des tatsächlichen Energieverbrauchs von Aufzügen, Fahrtreppen und Fahrsteigen
auf der Grundlage von Messungen an Einzelanlagen;
b) Verfahren zur Durchführung von regelmäßigen Überprüfungen des Energieverbrauchs von Aufzügen,
Fahrtreppen und Fahrsteigen im Betrieb.
Dieser Teil der ISO 25745 behandelt nur die Energieprofile während der Betriebsphase innerhalb des
Lebenszyklus von Aufzügen, Fahrtreppen und Fahrsteigen.
1.2 Aufzüge
Bezüglich der Aufzüge behandelt dieser Teil der ISO 25745 keine energierelevanten Aspekte wie:
a) Beleuchtung des Schachtes;
b) Einrichtungen für die Heizung und Kühlung im Fahrkorb;
c) Beleuchtung des Triebwerksraumes;
d) Heizung, Lüftung und Klimatisierung des Triebwerksraumes;
e) nicht-aufzugsrelevante Anzeigesysteme, Videoüberwachungskameras usw.;
f) nicht-aufzugsrelevante Überwachungssysteme (Gebäudemanagementsysteme usw.);
g) Auswirkungen einer Gruppensteuerung auf den Energieverbrauch;
h) Verbrauch über Steckdosen.

Performance énergétique des ascenseurs, escaliers mécaniques et trottoirs roulants - Partie 1: Mesurage de l'énergie et vérification (ISO 25745-1:2012)

L'ISO 25745-1:2012 spécifie: a) des méthodes de mesure de la consommation énergétique réelle des ascenseurs, escaliers mécaniques et trottoirs roulants sur la base d'unités individuelles, et b) des méthodes de vérification énergétique périodique des ascenseurs, escaliers mécaniques et trottoirs roulants en service.
Pour les ascenseurs, l'ISO 25745-1:2012 ne traite pas des aspects énergétiques tels que: l'éclairage de la gaine d'ascenseur; les équipements de chauffage et de refroidissement installés dans la cabine d'ascenseur; l'éclairage du local des machines; le chauffage, la ventilation et le conditionnement d'air du local des machines; les systèmes d'affichage, les caméras de vidéosurveillance, etc. qui ne concernent pas l'ascenseur; les systèmes de surveillance qui ne concernent pas l'ascenseur (systèmes de gestion technique du bâtiment, etc.); l'incidence sur la consommation énergétique du mode de distribution des cabines d'un groupe d'ascenseurs; la consommation par le biais des prises de courant.
Pour les escaliers mécaniques et les trottoirs roulants, l'ISO 25745-1:2012 traite des aspects énergétiques des équipements auxiliaires tels que: l'éclairage, à l'exception de l'éclairage de la plaque porte-peignes, de l'éclairage de l'interstice entre les marches et des feux de signalisation; le refroidissement et le chauffage; les dispositifs d'alarme et les équipements d'alimentation de secours à batterie, etc.

Energetska učinkovitost dvigal (liftov), tekočih stopnic in tekočih stez - 1. del: Merjenje energije in preverjanje (ISO 25745-1:2012)

Ta del standarda ISO 25745 določa: a) metode merjenja dejanske energetske porabe dvigal, tekočih stopnic in tekočih stez na podlagi posamezne enote; b) metode za izvajanje periodičnega preverjanja energetskega delovanja dvigal, tekočih stopnic in tekočih stez. Ta del standarda ISO 25745 upošteva samo energetsko učinkovitost med obdobjem delovanja življenjskega cikla dvigal, tekočih stopnic ali tekočih stez. Ta del standarda ISO 25745 za dvigala ne krije energetskih vidikov, kot so: a) osvetlitev jaška; b) oprema za ogrevanje in hlajenje kletke dvigala; c) osvetlitev strojnice; d) ogrevanje, prezračevanje in klimatizacija strojnice; e) prikazni sistemi, ki niso del dvigala, npr. varnostne kamere zaprtega kroga idr.; f) nadzorne kamere, ki niso del dvigala (sistemi upravljanja zgradbe idr.); g) vpliv odziva skupine dvigal na klic na energetsko porabo; h) poraba skozi vtičnice. Pri tekočih stopnicah in tekočih stezah ta del standarda ISO 25745 zajema energetske vidike pomožne opreme, kot so: a) osvetlitev, razen osvetlitve plošče grebena, osvetlitve reže za korak in osvetlitve semaforja; b) hlajenje in ogrevanje; c) alarmne naprave in oprema za nujnostno napajanje itd.

General Information

• Status: Withdrawn
• Public Enquiry End Date: 29-Sep-2008
• Publication Date: 13-May-2013
• Withdrawal Date: 07-Nov-2023
• ICS: 91.140.90 - Lifts. Escalators
• Technical Committee: DTN - Lift and transport appliances
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 07-Nov-2023
• Due Date: 30-Nov-2023
• Completion Date: 08-Nov-2023
• Ref Project: EN ISO 25745-1:2012 - Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification (ISO 25745-1:2012)

Relations

• Revises: SIST EN ISO 25745-1:2023 - Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement and verification (ISO 25745-1:2023)
• Effective Date: 03-Aug-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 25745-1:2013
01-junij-2013
(QHUJHWVNDXþLQNRYLWRVWGYLJDOOLIWRYWHNRþLKVWRSQLFLQWHNRþLKVWH]GHO
0HUMHQMHHQHUJLMHLQSUHYHUMDQMH,62
Energy performance of lifts, escalators and moving walks - Part 1: Energy measurement
and verification (ISO 25745-1:2012)
Energieeffizienz von Aufzügen, Fahrtreppen und Fahrsteigen - Teil 1: Energiemessung
und Konformität (ISO 25745-1:2012)
Performance énergétique des ascenseurs, escaliers mécaniques et trottoirs roulants -
Partie 1: Mesurage de l'énergie et vérification (ISO 25745-1:2012)
Ta slovenski standard je istoveten z: EN ISO 25745-1:2012
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
SIST EN ISO 25745-1:2013 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 25745-1:2013

---------------------- Page: 2 ----------------------

SIST EN ISO 25745-1:2013


EUROPEAN STANDARD
EN ISO 25745-1

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2012
ICS 91.140.90
English Version
Energy performance of lifts, escalators and moving walks - Part
1: Energy measurement and verification (ISO 25745-1:2012)
Performance énergétique des ascenseurs, escaliers Energieeffizienz von Aufzügen, Fahrtreppen und
mécaniques et trottoirs roulants - Partie 1: Mesurage de Fahrsteigen - Teil 1: Energiemessung und Konformität (ISO
l'énergie et vérification (ISO 25745-1:2012) 25745-1:2012)
This European Standard was approved by CEN on 29 September 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25745-1:2012: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 25745-1:2013
EN ISO 25745-1:2012 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 25745-1:2013
EN ISO 25745-1:2012 (E)
Foreword
This document (EN ISO 25745-1:2012) has been prepared by Technical Committee ISO/TC 178 "Lifts,
escalators and moving walks" in collaboration with Technical Committee CEN/TC 10 “Lifts, escalators and
moving walks” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the
latest by April 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 25745-1:2012 has been approved by CEN as a EN ISO 25745-1:2012 without any
modification.

3

---------------------- Page: 5 ----------------------

SIST EN ISO 25745-1:2013

---------------------- Page: 6 ----------------------

SIST EN ISO 25745-1:2013
INTERNATIONAL ISO
STAN
...

SLOVENSKI STANDARD
oSIST prEN ISO 25745-1:2008
01-september-2008
(QHUJHWVNDXþLQNRYLWRVWGYLJDOOLIWRYLQWHNRþLKVWRSQLFGHO0HUMHQMHSRUDEH
HQHUJLMHLQVNODGQRVW,62',6
Energy performance of lifts and escalators - Part 1: Energy measurement and
conformance (ISO/DIS 25745-1:2008)
Mesure de l'énergie des ascenseurs et escaliers mécaniques - Partie 1: Mesure de
l'énergie et de la conformité (ISO/DIS 25745-1:2008)
Ta slovenski standard je istoveten z: prEN ISO 25745-1
ICS:
91.140.90 'YLJDOD7HNRþHVWRSQLFH Lifts. Escalators
oSIST prEN ISO 25745-1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 25745-1:2008

---------------------- Page: 2 ----------------------
oSIST prEN ISO 25745-1:2008
EUROPEAN STANDARD
DRAFT
prEN ISO 25745-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2008
ICS 91.140.90

English Version
Energy performance of lifts and escalators - Part 1: Energy
measurement and conformance (ISO/DIS 25745-1:2008)
Mesure de l'énergie des ascenseurs et escaliers
mécaniques - Partie 1: Mesure de l'énergie et de la
conformité (ISO/DIS 25745-1:2008)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 10.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 25745-1:2008: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN ISO 25745-1:2008
prEN ISO 25745-1:2008 (E)
Contents Page
Foreword.3

2

---------------------- Page: 4 ----------------------
oSIST prEN ISO 25745-1:2008
prEN ISO 25745-1:2008 (E)
Foreword
This document (prEN ISO 25745-1:2008) has been prepared by Technical Committee ISO/TC 178 "Paving
units and kerbs" in collaboration with Technical Committee CEN/TC 10 “Lifts, escalators and moving walks”
the secretariat of which is held by AFNOR.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO/DIS 25745-1:2008 has been approved by CEN as a prEN ISO 25745-1:2008 without any
modification.

3

---------------------- Page: 5 ----------------------
oSIST prEN ISO 25745-1:2008

---------------------- Page: 6 ----------------------
oSIST prEN ISO 25745-1:2008
DRAFT INTERNATIONAL STANDARD ISO/DIS 25745-1
ISO/TC 178 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2008-06-26 2008-11-26
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Energy performance of lifts and escalators —
Part 1:
Energy measurement and conformance
Mesure de l'énergie des ascenseurs et escaliers mécaniques —
Partie 1: Mesure de l'énergie et de la conformité
ICS 91.140.90

ISO/CEN PARALLEL ENQUIRY
The CEN Secretary-General has advised the ISO Secretary-General that this ISO/DIS covers a subject
of interest to European standardization. In accordance with the ISO-lead mode of collaboration as
defined in the Vienna Agreement, consultation on this ISO/DIS has the same effect for CEN
members as would a CEN enquiry on a draft European Standard. Should this draft be accepted, a
final draft, established on the basis of comments received, will be submitted to a par
...