SIST HD 60364-7-706:2007/A1:2021
(Amendment)Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
Low-voltage electrical installations - Part 7-706: Requirements for special installations or locations - Conducting locations with restricted movement
The particular requirements of this part apply to fixed equipment in conducting locations where movement of persons is restricted by the location, and to supplies for portable equipment for use in such locations. A conducting location with restricted movement is comprised mainly of metallic or other conductive surrounding parts, within which it is likely that a person will come in contact through a substantial portion of his body with the metallic or other conductive surrounding parts and where the possibility of interrupting this contact is limited.
Errichten von Niederspannungsanlagen - Teil 7-706: Anforderungen für Betriebsstätten, Räume und Anlagen besonderer Art - Leitfähige Bereiche mit begrenzter Bewegungsfreiheit
Installations électriques basse tension - Partie 7-706: Exigences pour les installations ou emplacements spéciaux - Enceintes conductrices exiguës
Les exigences particulières de la présente partie s'appliquent aux matériels fixes des enceintes conductrices exiguës et à l'alimentation des appareils portatifs à l'intérieur de ces enceintes. Une enceinte conductrice exiguë est un local ou emplacement de travail dont les parois sont essentiellement constituées de parties métalliques ou conductrices, à l'intérieur duquel une personne peut venir en contact, sur une partie importante de son corps, avec les parties conductrices environnantes et dont l'exiguïté limite les possibilités d'interrompre ce contact.
Nizkonapetostne električne inštalacije - 7-706. del: Zahteve za posebne inštalacije ali lokacije - Omejeni prevodni prostori - Dopolnilo A1
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST HD 60364-7-706:2007/A1:2021
01-januar-2021
Nizkonapetostne električne inštalacije - 7-706. del: Zahteve za posebne inštalacije
ali lokacije - Omejeni prevodni prostori - Dopolnilo A1
Low-voltage electrical installations - Part 7-706: Requirements for special installations or
locations - Conducting locations with restricted movement
Errichten von Niederspannungsanlagen - Teil 7-706: Anforderungen für Betriebsstätten,
Räume und Anlagen besonderer Art - Leitfähige Bereiche mit begrenzter
Bewegungsfreiheit
Installations électriques basse tension - Partie 7-706: Exigences pour les installations ou
emplacements spéciaux - Enceintes conductrices exiguës
Ta slovenski standard je istoveten z: HD 60364-7-706:2007/A1:2020
ICS:
91.140.50 Sistemi za oskrbo z elektriko Electricity supply systems
SIST HD 60364-7-706:2007/A1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST HD 60364-7-706:2007/A1:2021
---------------------- Page: 2 ----------------------
SIST HD 60364-7-706:2007/A1:2021
HARMONIZATION DOCUMENT HD 60364-7-706:2007/A1
DOCUMENT D'HARMONISATION
HARMONISIERUNGSDOKUMENT
November 2020
ICS 29.020; 91.140.50
English Version
Low-voltage electrical installations - Part 7-706: Requirements
for special installations or locations - Conducting locations with
restricted movement
(IEC 60364-7-706:2005/A1:2019)
Installations électriques basse tension - Partie 7-706: Errichten von Niederspannungsanlagen - Teil 7-706:
Exigences pour les installations ou emplacements spéciaux Anforderungen für Betriebsstätten, Räume und Anlagen
- Enceintes conductrices exigües besonderer Art - Leitfähige Bereiche mit begrenzter
(IEC 60364-7-706:2005/A1:2019) Bewegungsfreiheit
(IEC 60364-7-706:2005/A1:2019)
This amendment A1 modifies the Harmonization Document HD 60364-7-706:2007; it was approved by CENELEC on 2019-10-31.
CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for implementation of
this amendment at national level.
Up-to-date lists and bibliographical references concerning such national implementations may be obtained on application to the CEN-
CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German).
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. HD 60364-7-706:2007/A1:2020 E
---------------------- Page: 3 ----------------------
SIST HD 60364-7-706:2007/A1:2021
HD 60364-7-706:2007/A1:2020 (E)
European foreword
The text of document 64/2380/FDIS, future IEC 60364-7-706/A1, prepared by IEC/TC 64 "Electrical
installations and protection against electric shock" was submitted to the IEC-CENELEC parallel vote
and approved by CENELEC as HD 60364-7-706:2007/A1:2020.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-05-06
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2023-11-06
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 60364-7-706:2005/A1:2020 was approved by CENELEC as
a European Standard without any modification.
2
---------------------- Page: 4 ----------------------
SIST HD 60364-7-706:2007/A1:2021
HD 60364-7-706:2007/A1:2020 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60364-4-41 (mod) 2005 Low-voltage electrical installations - Part HD 60364-4-41 2017
4-41: Protection for safety - Protection
against electric shock
+ A1 2017 - -
- - + A11 2017
- - + A12 2019
3
---------------------- Page: 5 ----------------------
SIST HD 60364-7-706:2007/A1:2021
HD 60364-7-706:2007/A1:2020 (E)
Annex ZB
(normative)
Special national conditions
Special national condition: National characteristic or practice that cannot be changed even over a
long period, e.g. climatic conditions, electrical earthing conditions.
NOTE If it affects harmonization, it forms part of the Harmonization Document.
For the countries in which the relevant special national conditions apply these provisions are
normative, for other countries they are informative.
Clause Special national condition
706.1 United Kingdom
In United Kingdom (GB), this Part does not apply to electrical systems as
defined in BS 7909 used in structures, sets, mobile units, etc., as used for
public or private events, touring shows, theatrical, radio, TV or film
productions and similar activities of the entertainment industry.”
706.1 Germany
In Germany, the use of welding power sources in conducting location with
restricted movement is specified in IEC 60974-9.
706.3.1 Germany
In Germany, the definition of conducting location with restricted movement
is replaced by:
location comprised mainly of metallic or other conductive surrounding parts,
within which it is likely that a person will come in contact through a
substantial portion of his body with this parts and where the possibility of
interrupting this contact is limited.
706.410.3.3 France
In France, PELV is not allowed in conducting locations with restricted
movement.
706.414 Germany
In Germany PELV is not allowed in conducting locations with restricted
movement.
706.414 France
In France, PELV is not allowed in conducting locations with restricted
movement.
706.522.6 Austria
In Austria, the following requirements are added:
For flexible cables at least types H07RN-R or equivalent like H07BQ-F,
XYMM_K35 or NSSHöu are required.
For the supply to handlamps at least H05RN-F or equivalent is required.
4
---------------------- Page: 6 ----------------------
SIST HD 60364-7-706:2007/A1:2021
HD 60364-7-706:2007/A1:2020 (E)
Annex ZC
(normative)
A-deviations
A-deviation: National deviation due to regulations, the alteration of which is for the time being outside
the competence of the CEN-CENELEC national member.
This European Standard does not fall under any Directive/Regulation of the EU.
In the relevant CEN-CENELEC countries, these A-deviations are valid instead of the respective
provisions of the European Standard until the national situation causing the A-deviation has changed.
Clause Special national condition
706.522.6 Austria
In Autria the following requirement is mandatory in Austria.by the
Regulations for electrical low voltage installations, statutory order BGBl.
II/223/2010, issued 12. July 2010
706.522.6 Impact (AG)
Flexible cord extension shall be designed as heavy-duty cables H07RN-F
or H07BQ-F according to EN 50525-2-21. Furthermore, hand tools and
portable electrical equipment with equivalent cord set shall be used.
Handlamps with flexible cord set with an ordinary duty cables – H05RN-F
according to EN 50525-2-21 or equivalent shall be used.
5
---------------------- Page: 7 ----------------------
SIST HD 60364-7-706:2007/A1:2021
---------------------- Page: 8 ----------------------
SIST HD 60364-7-706:2007/A1:2021
IEC 60364-7-706
®
Edition 2.0 2019-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
A MENDMENT 1
AM ENDEMENT 1
Low-voltage electrical installations –
Part 7-706: Requirements for special installations or locations – Conducting
locations with restricted movement
Installations électriques basse tension –
Partie 7-706: Exigences pour les installations ou emplacements spéciaux –
Enceintes conductrices exiguës
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 91.140.50; 29.020 ISBN 978-2-8322-7333-3
Warning! Make sure that you obtained this publication from an authorized distributor.
Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST HD 60364-7-706:2007/A1:2021
– 2 – IEC 60364-7-706:2005/AMD1:2019
© IEC 2019
FOREWORD
This amendment has been prepared by IEC technical committee 64: Electrical installations
and protection against electric shock.
The text of this amendment is based on the following documents:
FDIS Report on voting
64/2380/FDIS 64/2394/RVD
Full information on the voting for the approval of this amendment can be found in the report
on voting indicated in the above table.
The committee has decided that the contents of this amendment and the base publication will
remain unchanged until the stability date indicated on the IEC website under
"http://webstore.iec.ch" in the data rel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.