SIST EN ISO 4136:2013
(Main)Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
This International Standard specifies the sizes of test specimen and the procedure for carrying out transverse tensile tests in order to determine the tensile strength and the location of fracture of a welded butt joint. This International Standard applies to metallic materials in all forms of product with joints made by any fusion welding process. Unless otherwise specified for specific points in this International Standard, the general principles of ISO 6892-1 and ISO 6892-2 apply.
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen - Querzugversuch (ISO 4136:2012)
Diese Internationale Norm legt die Probenmaße und das Verfahren für die Durchführung von Querzug-versuchen fest, mit denen die Zugfestigkeit und die Lage des Bruches einer Stumpfschweißverbindung ermittelt werden.
Diese Internationale Norm gilt für metallische Werkstoffe jeder Herstellungsart, deren Verbindung mit einem beliebigen Schmelzschweißprozess hergestellt wurde.
Falls nicht anders in dieser Internationalen Norm angegeben, gelten die allgemeinen Festlegungen nach ISO 6892-1 und ISO 6892-2.
Essais destructifs des soudures sur matériaux métalliques - Essai de traction transversale (ISO 4136:2012)
L'ISO 4136:2012 spécifie les dimensions des éprouvettes et le mode opératoire d'essai de traction transversale dans le but de déterminer la résistance à la traction et l'emplacement de la cassure d'un assemblage soudé bout à bout.
L'ISO 4136:2012 s'applique aux assemblages soudés à partir de matériaux métalliques sous toute forme de livraison, réalisés par tout procédé de soudage par fusion.
Sauf spécifications contraires concernant des points particuliers dans l'ISO 4136:2012, les principes généraux de l'ISO 6892‑1 et de l'ISO 6892‑2 s'appliquent.
Porušitveni preskusi zvarov na kovinskih materialih - Prečni natezni preskus (ISO 4136:2012)
Ta mednarodni standard določa velikosti preskusnega vzorca in postopke za izvajanje prečnih nateznih preskusov, da bi se določila natezna trdnost ali mesto zloma zvarjenega soležnega spoja. Ta mednarodni standard se uporablja za kovinske materiale v vseh oblikah izdelkov s spoji, ki so izdelani s postopkom talilnega varjenja. Če ni navedeno drugače za določene točke v tem mednarodnem standardu, se uporabljajo splošna načela standardov ISO 6892-1 in ISO 6892-2.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4136:2013
01-december-2013
1DGRPHãþD
SIST EN ISO 4136:2011
3RUXãLWYHQLSUHVNXVL]YDURYQDNRYLQVNLKPDWHULDOLK3UHþQLQDWH]QLSUHVNXV ,62
Destructive tests on welds in metallic materials - Transverse tensile test (ISO 4136:2012)
Zerstörende Prüfung von Schweißverbindungen an metallischen Werkstoffen -
Querzugversuch (ISO 4136:2012)
Essais destructifs des soudures sur matériaux métalliques - Essai de traction
transversale (ISO 4136:2012)
Ta slovenski standard je istoveten z: EN ISO 4136:2012
ICS:
25.160.40 Varjeni spoji in vari Welded joints
SIST EN ISO 4136:2013 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4136:2013
---------------------- Page: 2 ----------------------
SIST EN ISO 4136:2013
EUROPEAN STANDARD
EN ISO 4136
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2012
ICS 25.160.40 Supersedes EN ISO 4136:2011
English Version
Destructive tests on welds in metallic materials - Transverse
tensile test (ISO 4136:2012)
Essais destructifs des soudures sur matériaux métalliques - Zerstörende Prüfung von Schweißverbindungen an
Essai de traction transversale (ISO 4136:2012) metallischen Werkstoffen - Querzugversuch (ISO
4136:2012)
This European Standard was approved by CEN on 31 October 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4136:2012: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4136:2013
EN ISO 4136:2012 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4136:2013
EN ISO 4136:2012 (E)
Foreword
This document (EN ISO 4136:2012) has been prepared by Technical Committee ISO/TC 44 “Welding and
allied processes” in collaboration with Technical Committee CEN/TC 121 “Welding” the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2013, and conflicting national standards shall be withdrawn at the
latest by May 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 4136:2011.
According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 4136:2012 has been approved by CEN as a EN ISO 4136:2012 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 4136:2013
---------------------- Page: 6 ----------------------
SIST EN ISO 4136:2013
INTERNATIONAL ISO
STANDARD 4136
Third edition
2012-11-01
Destructive tests on welds in metallic
materials — Transverse tensile test
Essais destructifs des soudures sur matériaux métalliques ― Essai de
traction transversale
Reference number
ISO 4136:2012(E)
©
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 4136:2013
ISO 4136:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the
address below or ISO’s member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4136:2013
ISO 4136:2012(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Principle . 1
4 Symbols and abbreviated terms . 1
5 Preparation of test specimens . 2
5.1 Location . 2
5.2 Marking . 2
5.3 Heat treatment and/or ageing . 2
5.4 Extraction . 3
5.5 Machining . 3
6 Test procedure . 7
7 Test results . 7
7.1 General . 7
7.2 Location of fracture . 7
7.3 Examination of fracture surfaces . 7
8 Test report . 7
Annex A (informative) Example of a test report . 9
© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4136:2013
ISO 4136:2012(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International
Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies
casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 4136 was prepared by Technical Committee ISO/TC 44, Welding and allied processes, Subcommittee
SC 5, Testing and inspection of welds.
This third edition cancels and replaces the second edition (ISO 413
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.