SIST EN 60763-3-1:1998

Specification for laminated pressboard -- Part 3: Specifications for individual materials -- Sheet 1: Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2

Gives the requirements for laminated precompressed board comprised of 100 % sulphate wood pulp or a mixture of sulphate wood pulp and cotton, bonded with two bonding agents; casein and non-aqueous.

Bestimmung für Blockspan -- Teil 3: Anforderungen für einzelne Werkstoffe -- Blatt 1: Bestimmung für heißgepreßten Blockspan - Typen LB 3.1.1, 3.1.2, 3.3.1 und 3.3.2

Spécification pour cartons comprimés et contrecollés -- Partie 3: Spécifications pour matériaux particuliers -- Feuille 1: Types LB 3.1.1, 3.1.2, 3.3.1 et 3.3.2 - Carton précomprimé contrecollé

Contient les prescriptions applicables aux cartons précomprimés et contrecollés composés soit de 100 % de pâte de bois au sulfate, soit d'un mélange de pâte de bois au sulfate et de coton, encollés avec deux types d'adhésif: caséine et non acqueux.

Specification for laminated pressboard - Part 3: Specifications for individual materials - Sheet 1: Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2 (IEC 60763-3-1:1992)

General Information

• Status: Withdrawn
• Publication Date: 31-May-1998
• Withdrawal Date: 06-Jan-2014
• ICS: 29.035.10 - Paper and board insulating materials
• Technical Committee: IIZS - Insulating materials and systems
• Current Stage: 9900 - Withdrawal (Adopted Project)
• Start Date: 06-Jan-2014
• Due Date: 29-Jan-2014
• Completion Date: 07-Jan-2014
• Ref Project: EN 60763-3-1:1996 - Specification for laminated pressboard - Part 3: Specifications for individual materials - Sheet 1: Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2

Relations

• Revised: SIST EN 60763-3-1:2011 - Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
• Effective Date: 07-Jan-2014
• Replaced By: SIST EN 60763-3-1:2011 - Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
• Effective Date: 29-Jan-2023
• Replaced By: SIST EN 60763-3-1:2011 - Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
• Effective Date: 07-Jun-2022
• Replaced By: SIST EN 60763-3-1:2011 - Laminated pressboard for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Requirements for laminated precompressed pressboard, Types LB 3.1A.1 and LB3.1A.2 (IEC 60763-3-1:2010)
• Effective Date: 01-Jan-2014

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60763-3-1:1998
01-junij-1998
Specification for laminated pressboard - Part 3: Specifications for individual
materials - Sheet 1: Specifications for laminated precompressed board - Types LB
3.1.1, 3.1.2, 3.3.1 and 3.3.2 (IEC 60763-3-1:1992)
Specification for laminated pressboard -- Part 3: Specifications for individual materials --
Sheet 1: Specifications for laminated precompressed board - Types LB 3.1.1, 3.1.2, 3.3.1
and 3.3.2
Bestimmung für Blockspan -- Teil 3: Anforderungen für einzelne Werkstoffe -- Blatt 1:
Bestimmung für heißgepreßten Blockspan - Typen LB 3.1.1, 3.1.2, 3.3.1 und 3.3.2
Spécification pour cartons comprimés et contrecollés -- Partie 3: Spécifications pour
matériaux particuliers -- Feuille 1: Types LB 3.1.1, 3.1.2, 3.3.1 et 3.3.2 - Carton
précomprimé contrecollé
Ta slovenski standard je istoveten z: EN 60763-3-1:1996
ICS:
29.035.10 Papirni in kartonski izolacijski Paper and board insulating
materiali materials
SIST EN 60763-3-1:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60763-3-1:1998

---------------------- Page: 2 ----------------------

SIST EN 60763-3-1:1998

---------------------- Page: 3 ----------------------

SIST EN 60763-3-1:1998

---------------------- Page: 4 ----------------------

SIST EN 60763-3-1:1998

---------------------- Page: 5 ----------------------

SIST EN 60763-3-1:1998

---------------------- Page: 6 ----------------------

SIST EN 60763-3-1:1998
CEI
NORME
IEC
INTERNATIONALE
763-3-1
INTERNATIONAL
Première édition
STANDARD
First edition
1992-09
pour cartons comprimés
Spécification
contrecollés
et
Partie 3:
Spécifications pour matériaux particuliers
Feuille 1: Types LB 3.1.1, 3.1.2, 3.3.1 et 3.3.2
Carton précomprimé contrecollé
Specification for laminated pressboard
Part 3:
Specifications for individual materials
Sheet 1: Specifications for laminated
precompressed board
Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2
1992 Droits de reproduction réservés — Copyright - all rights reserved
© CEI
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized
utilisée sous quelque forme que ce soit et par aucun procédé, in any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and mic film, without permission
ro
microfilms, sans l'accord écrit de l'éditeur. in writing from the publisher
Suisse
Bureau central de la Commission Electrotechnique Internationale 3, rue de Varembé Genève
Commission Electrotechnique Internationale CODE PRIX
E
International Electrotechnical Commission PRICE CODE
IEC
Mem,ayuapottrian 3nettrporexrtNVecnan
HOMNCCNSi
• vigueur
Pour prix, voir catalogue en
•
For price, see current catalogue

---------------------- Page: 7 ----------------------

SIST EN 60763-3-1:1998
- 3 -
763-3-1 © IEC
INTERNATIONAL ELECTROTECHNICAL COMMISSION
SPECIFICATION FOR LAMINATED PRESSBOARD
Part 3: Specifications for individual materials
Sheet 1: Specifications for laminated precompressed board
Types LB 3.1.1, 3.1.2, 3.3.1 and 3.3.2
FOREWORD
1) The formal decisions or agreements of the IEC on technical matters, prepared by Technical Committees on
which all the National Committees having a special interest therein are represented, express, as nearly as
possible, an international consensus of opinion on the subjects dealt with.
They have the form of recommendations for international use and they are accepted by the National
2)
Committees in that sense.
In order to promote international unification, the IEC expresses the wish that all National Committees
3)
should adopt the text of the IEC recommendation for their national rules in so far as national conditions will
permit. Any divergence between the IEC recommendation and the corresponding national rules should, as
far as possible, be clearly indicated in the latter.
This sheet of International Stand
...