Powered pedestrian doors - Safety in use of power pedestrian doors - Requirements and test methods

This European Standard specifies requirements regarding design and test methods for external and internal power operated pedestrian doorsets. Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically. This European Standard covers safety in use of power operated pedestrian doorsets used for normal access as well as in escape routes and as fire resistance and/or smoke control doorsets. The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets, including balanced doorsets and folding doorsets with a horizontally moving leaf. Power operated pass doorsets incorporated in other doorsets for which the main intended use is giving safe access for persons are covered by the scope of this European Standard. This European Standard deals with all significant hazards, hazardous situations and events relevant to power operated doorsets when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

Kraftbetätigte Türen - Nutzungssicherheit an kraftbetätigten Türen - Anforderungen und Prüfverfahren

1.1   Allgemeines
Die vorliegende Europäische Norm legt Anforderungen an die Gestaltung von sowie Prüfverfahren für kraftbetätigte Innen- und Außentüren fest. Derartige Türkonstruktionen können elektromechanisch, elektro-hydraulisch oder pneumatisch betrieben sein.
Diese Europäische Norm deckt die Nutzungssicherheit an kraftbetätigten Türen ab, die für den üblichen Zugang sowie in Fluchtwegen und als Feuer- und/oder Rauchschutztüren eingesetzt werden.
Die abgedeckten Türbauarten umfassen kraftbetätigte Schiebe-, Drehflügel- und Karusselltüren, einschließlich Drehschiebetüren und Falttüren mit einem horizontal bewegten Flügel.
Kraftbetätigte Schlupftüren, die Teil anderer Türen sind und deren bestimmungsgemäßer Hauptverwen-dungszweck darin besteht, einen sicheren Zugang für Personen zu bieten, werden durch den Anwen-dungsbereich dieser Europäischen Norm abgedeckt.
Die vorliegende Europäische Norm behandelt alle für kraftbetätigte Türen relevanten signifikanten Gefährdungen, Gefährdungssituationen und Gefährdungsereignisse für den Fall, dass die Türen bestimmungsgemäß sowie unter nach normalem Ermessen durch den Hersteller vorhersehbaren Fehlanwendungsbedingungen benutzt werden (siehe Anhang J).
1.2   Ausschlüsse
Diese Europäische Norm gilt nicht für:
   vertikal bewegte Türen;
   Aufzugstüren;
   Fahrzeugtüren;
   kraftbetätigte Türen oder Tore, die vorwiegend für den Fahrzeugverkehr oder den Zugang für Güter vorgesehen sind;
   Türen für den Einsatz in industriellen Prozessen;
   Trennwände;
   Türen und Tore außerhalb der Reichweite von Personen (wie z. B. Schutzgitter für Portalkrane);
   Verkehrssperren;
   Drehkreuze;
   Bahnsteigtüren.
Diese Europäische Norm behandelt keine spezifischen Funktionen von Türen, wie z. B. Sicherheit in Banken, auf Flughäfen usw. oder Türen für Brandabschnitte, bei denen die Übereinstimmung der spezifischen Funktion mit den anwendungsbezogenen Anforderungen Vorrang hat.
Diese Europäische Norm behandelt nicht den Betrieb in Umgebungen, in denen elektromagnetische Störungen außerhalb des Bereichs der in EN 61000 6 3 festgelegten Störungen liegen.
Die vorliegende Europäische Norm behandelt nicht den Funkteil der Betriebseinrichtungen von Türen. Wird eine funkbetriebene Einrichtung eingesetzt, sollten zusätzlich die zutreffenden ETSI-Normen angewendet werden.
Diese Europäische Norm enthält keine auf die Maschinenrichtlinie bezogenen speziellen Anforderungen an die durch eine kraftbetätigte Tür abgegebenen Geräusche, da diese nicht als signifikante Gefährdung angesehen werden.
Die vorliegende Europäische Norm ist nicht auf kraftbetätigte Türen anwendbar, die vor dem Datum der Veröffentlichung dieses Dokuments durch CEN hergestellt wurden.
Diese Europäische Norm behandelt nicht den Betrieb in Umgebungen, in denen ein Explosionsrisiko besteht.

Portes motorisées pour piétons - Utilisation sûre des portes motorisées pour piétons - Exigences et méthodes d'essai

Généralités
La présente Norme spécifie les exigences concernant la conception et les méthodes d’essai applicables aux portes motorisées pour piétons, extérieures et intérieures. Ces constructions de portes peuvent être actionnées de manière électromécanique, électrohydraulique ou pneumatique.
La présente Norme couvre la sécurité d’utilisation des portes motorisées pour piétons utilisées pour un accès normal, ainsi que celles utilisées comme issues de secours et comme portes coupe-feu ou pare-flamme.
Le type de portes couvert inclut les portes motorisées pour piétons coulissantes, battantes va-et-vient, battantes et tournantes, y compris les portes pivotantes-coulissantes (éclipsables) et portes accordéons, avec un tablier se déplaçant horizontalement.
La présente Norme européenne ne couvre pas l’exploitation dans des environnements où des perturbations électromagnétiques sont hors de la plage spécifiée dans l’EN 61000-6-3.
Exclusions
La présente Norme européenne ne s’applique pas :
-   aux portes à déplacement vertical,
-   aux portes d’ascenseurs,
-   aux portes de véhicules,
-   aux portes ou portails motorisés destinés au trafic de véhicules ou à l’accès de marchandises,
-   aux portes utilisées dans des processus industriels,
-   aux cloisons,
-   aux portes hors d’atteinte des personnes (comme par exemple les clôtures de grues à portique),
-   aux barrières,
-   aux tourniquets,
-   aux portes de plateformes.
La présente Norme ne couvre pas les fonctions spéciales des portes, comme la sécurité dans les banques, aéroports, etc. ou les compartiments étanches au feu, pour lesquelles la conformité de la fonction spécifique aux exigences de l’application doit être prioritaire.
La présente Norme européenne ne couvre pas la partie radio des portes. Si un dispositif radio est utilisé, il convient d’appliquer en sus les normes ETSI pertinentes.

Avtomatska električna vhodna vrata - Varnost pri uporabi avtomatskih vhodnih vrat - Zahteve in preskusne metode

Ta evropski standard določa zahteve glede oblike in preskusnih metod za zunanja in notranja avtomatska električna vhodna vrata. Takšna vrata se lahko upravljajo elektromehansko, elektrohidravlično ali pnevmatsko. Ta evropski standard zajema varnost pri uporabi avtomatskih električnih vhodnih vrat, ki se uporabljajo za običajne vhode, evakuacijske poti ter kot vrata za požarno odpornost ali/in nadzor dima. Vrste vhodnih vrat, ki jih zajema, so tudi avtomatična električna drsna, nihajoča ali vrteča se vrata, vključno z uravnoteženimi vrati in zložljivimi vrati z vodoravno premikajočimi krili. Ta standard zajema tudi avtomatska električna vrata, ki so vključena v druga vrata, katerih cilj je zagotavljanje varnega dostopa za osebe. Ta evropski standard opisuje vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi z avtomatskimi električnimi vhodnimi vrati, kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec.

General Information

Status
Published
Public Enquiry End Date
29-Jan-2010
Publication Date
04-Feb-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
04-Feb-2013
Due Date
11-Apr-2013
Completion Date
05-Feb-2013

Relations

Buy Standard

Standard
SIST EN 16005:2013
English language
58 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kraftbetätigte Türen - Nutzungssicherheit an kraftbetätigten Türen - Anforderungen und PrüfverfahrenPortes motorisées pour piétons - Utilisation sûre des portes motorisées pour piétons - Exigences et méthodes d'essaiPowered pedestrian doors - Safety in use of power pedestrian doors - Requirements and test methods97.120Avtomatske krmilne naprave za domAutomatic controls for household use91.060.50Vrata in oknaDoors and windowsICS:Ta slovenski standard je istoveten z:EN 16005:2012SIST EN 16005:2013en,fr,de01-marec-2013SIST EN 16005:2013SLOVENSKI

STANDARD
SIST EN 16005:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16005
October 2012 ICS 91.060.50 English Version

Power operated pedestrian doorsets - Safety in use - Requirements and test methods

Blocs-portes motorisés pour piétons - Sécurité d'utilisation -Exigences et méthodes d'essai

Kraftbetätigte Türen - Nutzungssicherheit - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 11 August 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16005:2012: ESIST EN 16005:2013

EN 16005:2012 (E) 2 Contents Page Foreword .............................................................................................................................................................. 4Introduction ......................................................................................................................................................... 51 Scope ...................................................................................................................................................... 61.1 General .................................................................................................................................................... 6 1.2 Exclusions .............................................................................................................................................. 6 2 Normative references ............................................................................................................................ 73 Terms and definitions ........................................................................................................................... 84 Safety requirements and protective measures ................................................................................ 104.1 General .................................................................................................................................................. 10 4.2 Information for use .............................................................................................................................. 11 4.2.1 General .................................................................................................................................................. 11 4.2.2 Marking ................................................................................................................................................. 12 4.3 Drive ...................................................................................................................................................... 12 4.3.1 General .................................................................................................................................................. 12 4.3.2 Switching off the drive ........................................................................................................................ 12 4.3.3 Electrical equipment ............................................................................................................................ 12 4.3.4 Hydraulic drives ................................................................................................................................... 13 4.3.5 Pneumatic drives ................................................................................................................................. 13 4.4 Doorset ................................................................................................................................................. 13 4.4.1 General .................................................................................................................................................. 13 4.4.2 Materials ............................................................................................................................................... 13 4.4.3 Shape of leaves .................................................................................................................................... 13 4.4.4 Leaf travel limiting device ................................................................................................................... 13 4.4.5 Manual operation ................................................................................................................................. 13 4.5 Activation.............................................................................................................................................. 14 4.5.1 Automatic activation ........................................................................................................................... 14 4.5.2 Manual activation ................................................................................................................................. 15 4.5.3 Remote activation ................................................................................................................................ 15 4.6 Avoidance of danger points and protection at danger points ........................................................ 15 4.6.1 General .................................................................................................................................................. 15 4.6.2 Power operated sliding doorsets ....................................................................................................... 16 4.6.3 Power operated swing doorsets ........................................................................................................ 17 4.6.4 Low energy movement ........................................................................................................................ 18 4.6.5 Power operated balanced doorsets ................................................................................................... 19 4.6.6 Power operated folding doorsets ...................................................................................................... 19 4.6.7 Limitation of impact forces ................................................................................................................. 20 4.6.8 Protective devices ............................................................................................................................... 21 4.6.9 Guards .................................................................................................................................................. 22 4.6.10 Barriers ................................................................................................................................................. 22 4.6.11 Safety distances .................................................................................................................................. 22 4.7 Additional requirements ..................................................................................................................... 23 4.7.1 Additional requirements for revolving doorsets .............................................................................. 23 4.7.2 Additional requirements for doorsets in escape routes and emergency exits ............................. 24 5 Tests ...................................................................................................................................................... 265.1 General .................................................................................................................................................. 26 5.2 Test conditions .................................................................................................................................... 26 5.2.1 General .................................................................................................................................................. 26 5.2.2 Impact force measuring equipment ................................................................................................... 26 5.2.3 Field impact force measuring equipment ......................................................................................... 27 5.2.4 On site measurement .......................................................................................................................... 27 5.3 Product information for installation, operation and maintenance ................................................. 27 5.4 Drive ...................................................................................................................................................... 27 SIST EN 16005:2013

EN 16005:2012 (E) 3 5.5 Doorset ................................................................................................................................................. 27 5.5.1 Materials ............................................................................................................................................... 27 5.5.2 Shape of leaves ................................................................................................................................... 27 5.5.3 Leaf travel limiting device .................................................................................................................. 27 5.6 Manual operation ................................................................................................................................. 28 5.7 Activation ............................................................................................................................................. 28 5.8 Durability test ....................................................................................................................................... 28 5.8.1 General ................................................................................................................................................. 28 5.8.2 Testing under normal conditions ...................................................................................................... 28 5.9 Special tests for hazards of revolving doorsets .............................................................................. 29 5.10 Test results .......................................................................................................................................... 30 Annex A (informative)

Illustration of some essential terms for various types of doorsets ...................... 31Annex B (normative)

Measuring points .......................................................................................................... 32Annex C (normative)

Tests for protective devices ........................................................................................ 35Annex D (informative)

Disabled person sign ................................................................................................. 42Annex E (informative)

Emergency break-out sign ......................................................................................... 43Annex F (normative)

Low energy doorsets .................................................................................................... 44Annex G (normative)

Safeguarding of power operated swing doorsets .................................................... 46Annex H (informative)

Danger points at revolving doorsets ........................................................................ 48Annex I (normative)

Log book ......................................................................................................................... 51Annex J (informative)

List of hazards, hazardous situations and hazardous events covered by this standard ............................................................................................................................................... 52Annex ZA (informative)

Relationship between this European Standard and the Essential Requirements of EU Directive 2006/42/EC ........................................................................................ 57Bibliography ...................................................................................................................................................... 57

SIST EN 16005:2013

EN 16005:2012 (E) 4 Foreword This document (EN 16005:2012) has been prepared by Technical Committee CEN/TC 33 “Doors, windows, shutters, building hardware and curtain walling”, the secretariat of which is held by AFNOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by April 2013, and conflicting national standards shall be withdrawn at the latest by April 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. This document is a supporting standard of the relevant product standard(s) for power operated pedestrian doorsets with or without fire resistance or smoke control characteristics. According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.SIST EN 16005:2013

EN 16005:2012 (E) 5 Introduction This standard is a type C standard as stated in EN ISO 12100. The machinery concerned and the extent to which hazards, hazardous situations and hazardous events are covered are indicated in the scope of this document. When provisions of this type C standard are different from those which are stated in type A or B standards, the provisions of this type C standard take precedence over the provisions of the other standards, for machines that have been designed and built according to the provisions of this type C standard. SIST EN 16005:2013

EN 16005:2012 (E) 6 1 Scope

1.1 General This European Standard specifies requirements regarding design and test methods for external and internal power operated pedestrian doorsets. Such doorset constructions may be operated electro-mechanically, electro-hydraulically or pneumatically.

This European Standard covers safety in use of power operated pedestrian doorsets used for normal access as well as in escape routes and as fire resistance and/or smoke control doorsets. The type of doorsets covered include power operated pedestrian sliding, swing and revolving doorsets, including balanced doorsets and folding doorsets with a horizontally moving leaf. Power operated pass doorsets incorporated in other doorsets for which the main intended use is giving safe access for persons are covered by the scope of this European Standard. This European Standard deals with all significant hazards, hazardous situations and events relevant to power operated doorsets when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex J). 1.2 Exclusions This European Standard does not apply to:  vertically moving doors;  doors on lifts;  doors on vehicles;  power operated doors or gates mainly intended for vehicular traffic or access for goods;  doors used in industrial processes;  partition walls;  doors outside the reach of people (such as crane gantry fences);  traffic barriers;  turnstiles;  platform doors. This European Standard does not cover special functions of doorsets, such as security in banks, airports, etc. or fire compartments, where conformity of the specific function with requirements of the application shall have the preference. This European Standard does not cover operation in environments where the electromagnetic disturbances are outside the range of those specified in EN 61000-6-3. This European Standard does not cover the radio part of operating devices of doorsets. If a radio-operating device is used, the relevant ETSI standards should be applied in addition. This European Standard does not contain any specific requirement regarding noise emitted by a power operated doorset in relation to the Machinery Directive as it is not considered to be a significant hazard. SIST EN 16005:2013

EN 16005:2012 (E) 7 This European Standard is not applicable to power operated pedestrian doorsets in use before the date of publication of this document by CEN. This European Standard does not cover operation in environments where there is a risk of explosion. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 349 Safety of machinery — Minimum gaps to avoid crushing of parts of the human body EN 1760-1, Safety of machinery — Pressure sensitive protective devices — Part 1: General principles for the design and testing of pressure sensitive mats and pressure sensitive floors EN 1760-2, Safety of machinery — Pressure sensitive protective devices — Part 2: General principles for the design and testing of pressure sensitive edges and pressure sensitive bars EN 12150-1, Glass in building — Thermally toughened soda lime silicate safety glass — Part 1: Definition and description EN 12433-1:1999, Industrial, commercial and garage doors and gates — Terminology — Part 1: Types of doors EN 12433-2:1999, Industrial, commercial and garage doors and gates — Terminology — Part 2: Parts of doors EN 12519:2004, Windows and pedestrian doors — Terminology EN 12978, Industrial, commercial and garage doors and gates — Safety devices for power operated doors and gates — Requirements and test methods EN 14351-1:2006+A1:2010, Windows and doors — Product standard, performance characteristics — Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics EN 60335-2-103, Household and similar electrical appliances — Safety — Part 2-103: Particular requirements for drives for gates, doors and windows EN 60529, Degrees of protection provided by enclosures (IP Code) EN ISO 4413:2010, Hydraulic fluid power — General rules and safety requirements for systems and their components (ISO 4413:2010) EN ISO 4414:2010, Pneumatic fluid power — General rules and safety requirements for systems and their components (ISO 4414:2010) EN ISO 12100:2010, Safety of machinery — General principles for design — Risk assessment and risk reduction (ISO 12100:2010) EN ISO 12543-1, Glass in building — Laminated glass and laminated safety glass — Part 1: Definitions and description of component parts (ISO 12543-1) EN ISO 12543-2, Glass in building — Laminated glass and laminated safety glass — Part 2: Laminated safety glass (ISO 12543-2) SIST EN 16005:2013

EN 16005:2012 (E) 8 EN ISO 13849-1, Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design (ISO 13849-1) EN ISO 13850, Safety of machinery — Emergency stop — Principles for design (ISO 13850) EN ISO 17025, General requirements for the competence of testing and calibration laboratories

(ISO/IEC 17025) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010, EN 12433-1:1999 (definitions from 2.1 to 3.11), EN 12433-2:1999, EN 12519:2004 and EN 14351-1:2006+A1:2010 and the following apply. 3.1 power operated pedestrian doorset doorset for pedestrian passage only with one or more leaves that is moved, at least in one direction, by an external energy supply (e.g. electrically) instead of manual or stored mechanical energy

Note 1 to entry: It includes drive, leaves, protective devices and any components needed for its safe operation. 3.2 revolving doorset power operated pedestrian doorset with one or more leaves connected to a common vertical axis of rotation within an enclosure Note 1 to entry: There is a wide range of design variations in this product group. See Figure 1 for examples. Note 2 to entry: Figure 1 refers to any rotation. The shown anticlockwise rotation is only the more common one.

a) b) c)
d) e) f)
g) h) i) j) Figure 1 — Revolving doorsets SIST EN 16005:2013
EN 16005:2012 (E) 9 3.3
balanced doorset

power operated pedestrian doorset with a pivot point allowing the leaf/leaves to slide sideways whilst simultaneously rotating 3.4

swing doorset power operated pedestrian doorset with a leaf which is hinged or pivoted at one side 3.5 folding doorset doorset with two or more leaves hinged together with one side of the leaf hinged or pivoted at the doorset jamb 3.6

sliding doorset

power operated pedestrian doorset with one or more leaves, moving horizontally in its guides parallel to the adjacent structure 3.7 low energy power operated doorset

power operated pedestrian doorset with a limited kinetic energy

3.8 break-out system whereby doorset leaves and side screens can be pushed open manually in the direction of escape 3.9 monitoring system system that checks and verifies the correct functioning of another system and in the event of any malfunctioning of that system switches the power operated doorset to a selected safe mode of operation 3.10 activator

means by which the power operation of the doorset is started 3.11 cycle
movement consisting of an opening and closing movement

Note 1 to entry: For sliding and swing doorsets, a cycle consists of a complete opening and closing movement. For revolving doorsets, a cycle means one passage. 3.12 lintel horizontal structural member spanning an opening at its head to carry a load above the opening 3.13 side screen side wall fixed or with a break out function that can be part of a power operated pedestrian doorset

3.14 track component or assembly designed to guide or support a doorset leaf when it moves 3.15 leading mullion doorset mullion at the first point at which a leaf of a power operated revolving doorset passes the curved screens SIST EN 16005:2013

EN 16005:2012 (E) 10 Note 1 to entry: See Annex A. 3.16 trailing mullion doorset mullion at the last point at which a leaf of a power operated revolving doorset passes the curved screens Note 1 to entry: See Annex A. 3.17 fire doorset generic term used in this European Standard for fire resistance doorsets and/or smoke control doorsets Note 1 to entry: For a complete definition of Fire Resisting Doorset and Smoke Control Doorset see EN 14600. 3.18 main closing edge edge of a doorset leaf, whose distance from the parallel opposing edge or surface determines the usable aperture [SOURCE: EN 12433-2:1999, definition 3.1.1] 3.19 opposing closing edge edge formed by the main closing edge of a counter closing leaf, a fixed edge or a surface against which the doorset leaf is moving (e.g. frame, floor) [SOURCE: EN 12433-2:1999, definition 3.1.2] 3.20 secondary closing edge any other closing edge of a doorset leaf, which is not the main closing edge or the opposing closing edge [SOURCE: EN 12433-2:1999, definition 3.1.3] 4 Safety requirements and protective measures 4.1 General

Power operated pedestrian doorsets shall comply with the safety requirements and/or protective measures of this clause. In addition, the machine shall be designed according to the principles of EN ISO 12100 for relevant but not significant hazards, which are not dealt with by this document. Power operated pedestrian doorsets as specified in this European Standard, including conversion of manual doorsets to power operation, shall be designed, constructed, installed, operated and properly maintained to meet the requirements of this European Standard. Warning signs shall be used to draw the users' attention to residual risks, if any. Power operated pedestrian doorsets shall be designed and installed in such a way that they do not have any sharp edges that could result in injuries due to cuts or grazes. Power operated pedestrian doorsets shall be designed in such a way that they can be installed, used, inspected, maintained and dismantled safely. NOTE When used in this standard, the term “manufacturer” is intended as defined in the Machinery Directive. SIST EN 16005:2013

EN 16005:2012 (E) 11 4.2 Information for use 4.2.1

General The manufacturer shall provide with the machine an instruction handbook in accordance with

EN ISO 12100:2010, 6.4. In particular, the following shall be included. The manufacturer shall provide information on operation, maintenance and inspection. Documents with instructions on how to correctly install and dismantle the power operated pedestrian doorset shall be provided where appropriate. Particular importance is attached to the description of danger points, the appropriate protective devices and residual risks. All documentation relevant to the doorset, the installation, the maintenance requirements and any incorporated diagrams, shall be legible and written in a language acceptable in the country in which the product is to be installed. Installation instructions to be used solely by the professional installer and which are not intended to be handed over to the owner, may be written in any official language used in Europe and agreed upon between manufacturer and purchaser. The documentation shall include all the necessary warning, advisory or cautionary notices. All symbols and diagrams incorporated into the documentation shall be in accordance with relevant European Standards. The installation instructions shall detail all operations to be carried out to safely install or dismantle the doorset and shall clearly state when the specified procedure can be adequately completed by non-professionals. The installation instruction shall specify all verifications needed after installation of the doorset. Proper operating instructions including routine maintenance instructions shall be provided to the final user after installation/upgrading of the doorset. User instructions shall at least include the following, as far as applicable: a) correct methods for operating the doorset; b) operating conditions: e.g. operating hours per day, automatic/manual operation, indication of the operating mode(s); c) explanation of the warning signs of the doorset; d) information about the safe use of manual emergency and/or manual release; e) range of intended environmental conditions (e.g. temperature, relative humidity, electromagnetic fields, and when applicable, warning against use in windy conditions); f) restrictions of use. Details of safety functions, list and location of protective devices shall also be provided. The documentation shall also contain information on prohibited use such as dashing through a closing doorset. Routine maintenance instructions shall highlight that to ensure safe operation, long term reliability and working efficiency, a power operated pedestrian doorset (including protective devices and safety systems) shall be regularly maintained according to the manufacturer's specification. They shall also detail frequency of maintenance to be carried out (recommended frequency for checking the correct operation of safety function and devices is, at least, once a year) and give simple general instructions for those that can be SIST EN 16005:2013

EN 16005:2012 (E) 12 undertaken by the owner without any specific competence, highlighting all other maintenance is to be carried out by professionals. The maintenance instructions shall inform the owner about the importance of re

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.