SIST EN ISO 4254-17:2022
(Main)Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)
Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)
This part of ISO 4254, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of trailed, mounted or self-propelled machines for:
- potato harvesting which carry out one or more of the following operations: haulm chopping, lifting, picking-up, cleaning, conveying and unloading of potatoes,
and
- sugar beet and fodder beet harvesting which carry out one or more of the following operations: leaf stripping, topping, extracting ((lifting)), picking-up, cleaning, conveying and unloading of beet.
Landmaschinen - Sicherheit - Teil 17: Hackfruchterntemaschinen (ISO 4254-17:2022)
Dieses Dokument, das zusammen mit ISO 4254 1 anzuwenden ist, legt die Sicherheitsanforderungen und ihre Überprüfung für die Auslegung und Konstruktion der folgenden Typen von gezogenen, angebauten oder selbstfahrenden Hackfruchterntemaschinen fest:
Siebroder,
Rübenroder,
Köpfroder,
die mindestens eine der folgenden Tätigkeiten durchführen können: Kraut-/Blattköpfen, Graben/Aufnehmen/Roden, Reinigen, Fördern und Entladen von Hackfrüchten.
Dieses Dokument ist auch für einzeln verwendete Kraut-/Blattköpfer anwendbar.
Dieses Dokument ist nicht anwendbar für Reinigungslader, die an der Rübenmiete arbeiten, da bei diesen Maschinentypen zusätzliche Gefährdungen vorhanden sind, die in diesem Dokument nicht behandelt werden.
Zusätzlich legt es fest, welche Informationen über sicheres Arbeiten vom Hersteller zur Verfügung zu stellen sind.
Die Liste der in diesem Dokument behandelten signifikanten Gefährdungen ist Anhang A zu entnehmen. Dieser gibt außerdem die Gefährdungen an, die nicht behandelt wurden.
Umweltaspekte sind in diesem Dokument nicht in Betracht gezogen worden. Geräusche sind in dieser Norm teilweise in Betracht gezogen worden.
Dieses Dokument ist hauptsächlich für Maschinen, die nach dem Erscheinungsdatum dieses Dokuments hergestellt wurden, anwendbar.
Matériel agricole - Sécurité - Partie 17: Matériel de récolte de pommes de terre, de betteraves à sucre et fourragères (ISO 4254-17:2022)
Le présent document, destiné à être utilisé conjointement avec l’ISO 4254-1, spécifie les exigences de sécurité ainsi que leur vérification pour la conception et la construction des types suivants de machines de récolte racines et tubercules, qu’elles soient traînées, portées ou autotractées:
— arracheuses par tamisage;
— arracheuses par levage;
— arracheuses par préhension;
qui exécutent l’une ou plusieurs des opérations suivantes: décolletage de fanes/feuilles, creusement/reprise/arrachage, nettoyage, convoyage et déchargement de racines.
Le présent document s’applique également aux machines de décolletage de fanes/feuilles utilisées individuellement.
Le présent document ne s’applique pas aux chargeuses-nettoyeuses utilisées sur un tas de betteraves, ces types de machines présentent d’autres phénomènes dangereux qui ne sont pas couverts par la présente norme.
En outre, elle spécifie le type d’informations que le fabricant doit fournir sur les pratiques d’utilisation sûre.
La liste des phénomènes dangereux significatifs traités dans le présent document est fournie dans l’Annexe A. L’Annexe A indique également les phénomènes dangereux qui n’ont pas été traités.
Les aspects liés à l’environnement n’ont pas été pris en compte dans la présente norme. Le bruit a été partiellement pris en considération dans le présent document.
Le présent document s’applique avant tout aux machines fabriquées après la date de publication de la norme.
Kmetijski stroji - Varnost - 17. del: Stroji za pobiranje gomoljnic (ISO 4254-17:2022)
Ta del standarda ISO 4254, ki je namenjen za uporabo skupaj s standardom ISO 4254-1, določa varnostne zahteve in njihovo preverjanje za načrtovanje ter konstrukcijo priklopnih, vgrajenih ali samognanih strojev za: – spravilo krompirja z enim ali več od naštetih postopkov: sekljanje stebel, dviganje, pobiranje, čiščenje, transport in razkladanje krompirja; ter – spravilo sladkorne in krmne pese z enim ali več od naštetih postopkov: odstranjevanje listja, rezanje stebel, ekstrakcija (dvig), pobiranje, čiščenje, transport in razkladanje pese.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 4254-17:2022
01-junij-2022
Nadomešča:
SIST EN 13118:2001+A1:2009
SIST EN 13140:2001+A1:2010
Kmetijski stroji - Varnost - 17. del: Stroji za pobiranje gomoljnic (ISO 4254-17:2022)
Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO 4254-17:2022)
Landmaschinen - Sicherheit - Teil 17: Hackfruchterntemaschinen (ISO 4254-17:2022)
Matériel agricole - Sécurité - Partie 17: Matériel de récolte de pommes de terre, de
betteraves à sucre et fourragères (ISO 4254-17:2022)
Ta slovenski standard je istoveten z: EN ISO 4254-17:2022
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
SIST EN ISO 4254-17:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 4254-17:2022
---------------------- Page: 2 ----------------------
SIST EN ISO 4254-17:2022
EN ISO 4254-17
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2022
EUROPÄISCHE NORM
ICS 65.060.50 Supersedes EN 13118:2000+A1:2009, EN
13140:2000+A1:2009
English Version
Agricultural machinery - Safety - Part 17: Root crop
harvesters (ISO 4254-17:2022)
Matériel agricole - Sécurité - Partie 17: Matériel de Landmaschinen - Sicherheit - Teil 17:
récolte de racines et tubercules (ISO 4254-17:2022) Hackfruchterntemaschinen (ISO 4254-17:2022)
This European Standard was approved by CEN on 17 January 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-17:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4254-17:2022
EN ISO 4254-17:2022 (E)
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
2
---------------------- Page: 4 ----------------------
SIST EN ISO 4254-17:2022
EN ISO 4254-17:2022 (E)
European foreword
This document (EN ISO 4254-17:2022) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2022, and conflicting national standards shall
be withdrawn at the latest by October 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13118:2000+A1:2009 and EN 13140:2000+A1:2009.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countr
...
SLOVENSKI STANDARD
oSIST prEN ISO 4254-17:2018
01-december-2018
Kmetijski stroji - Varnost - 17. del: Stroji za pobiranje gomoljnic (ISO/DIS 4254-
17:2018)
Agricultural machinery - Safety - Part 17: Root crop harvesters (ISO/DIS 4254-17:2018)
Landmaschinen - Sicherheit - Teil 17: Hackfruchterntemaschinen (ISO/DIS 4254-
17:2018)
Matériel agricole - Sécurité - Partie 17: Matériel de récolte de pommes de terre, de
betteraves à sucre et fourragères (ISO/DIS 4254-17:2018)
Ta slovenski standard je istoveten z: prEN ISO 4254-17
ICS:
65.060.50 Oprema za spravilo pridelkov Harvesting equipment
oSIST prEN ISO 4254-17:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 4254-17:2018
---------------------- Page: 2 ----------------------
oSIST prEN ISO 4254-17:2018
DRAFT INTERNATIONAL STANDARD
ISO/DIS 4254-17
ISO/TC 23/SC 7 Secretariat: UNI
Voting begins on: Voting terminates on:
2018-09-18 2018-12-11
Agricultural machinery — Safety —
Part 17:
Root crop harvesters
Matériel agricole — Sécurité —
Partie 17: Matériel de récolte de pommes de terre, de betteraves à sucre et fourragères
ICS: 65.060.40
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 4254-17:2018(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2018
---------------------- Page: 3 ----------------------
oSIST prEN ISO 4254-17:2018
ISO/DIS 4254-17:2018(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 4254-17:2018
ISO/DIS 4254-17:2018(E)
Contents Page
Foreword .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective/risk reduction measures for all machines .3
4.1 General . 3
4.2 Controls . 4
4.3 Visibility . 4
4.4 Haulm/leaf topping device . 4
4.4.1 Protection against unintentional contact with the rotating tools . 4
4.4.2 Haulm/leaf conveying dev
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.