This document specifies terms and definitions related to forage harvesters and their component parts. This document identifies dimensions and other characteristics aimed at allowing comparison of operations of the machines and to improve communication among engineers and researchers, in association with ISOÂ 8909-2, which lays down methods of measuring characteristics and performance requirements for the term defined.

  • Standard
    14 pages
    English language
    sale 15% off
  • Draft
    13 pages
    English language
    sale 15% off

This document specifies test methods for evaluations of forage harvester function and performance, covering forage harvesters which cut the crop directly at full width or from spaced-apart plant rows, or which pick up pre-cut crop. It applies to forage harvesters with driven knives for chopping and which deliver the chopped crop into a container or a separate vehicle or trailer. The forage harvesters can be tractor-mounted, trailed or self-propelled.

  • Standard
    15 pages
    English language
    sale 15% off
  • Draft
    15 pages
    English language
    sale 15% off

This document specifies the methods and requirements in assessing the dimensions and performance of a forage harvester, as defined in ISOÂ 8909-1, and its functional components. It also allows comparison of forage harvester performance through comparative testing.

  • Standard
    5 pages
    English language
    sale 15% off
  • Draft
    5 pages
    English language
    sale 15% off

2019-11-12 JF TC is reviewing editorially the Annex ZA and is preparing the information on significant changes to be put in the Foreword

  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

2019-11-12 JF TC is reviewing editorially the Annex ZA and is preparing the information on significant changes to be put in the Foreword

  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    12 pages
    English language
    sale 15% off
  • Standard
    12 pages
    French language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This European Standard specifies safety requirements and their verification for design and construction of pedestrian controlled motor mowers with rotary or reciprocating cutting means used in agricultural, forestry and landscaping to cut and/or mulch grass or similar plants or scrub and woody vegetation.
For the purposes of this standard the following types of pedestrian controlled machines are considered to be motor mowers:
-   flail mowers;
-   grassland mowers;
-   scrub clearing machines;
-   sickle bar mowers.
This standard applies also to multipurpose machines when used for cutting or mulching grass or scrub.
Note   When they are used for other operations (e.g. soil working) other standards can apply.
This standard does not cover lawn mowers (see EN ISO 5395 1, EN ISO 5395 2), engine driven brush cutters and grass trimmers (see EN ISO 11806) or other lawn maintenance equipment.
This document deals with significant hazards, hazardous situations and events, as listed in Annex A, relevant to pedestrian controlled motor mowers when used as intended and under conditions of misuse foreseeable by the manufacturer during normal operation and service. Additionally, it specifies the type of information to be provided by the manufacturer on safe working practices.
Environmental aspects (except noise) have not been considered in this standard.
This document is not applicable to motor mowers manufactured before the date of its publication.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a preferred method for determining and designating the capacity and unloading rate of combine harvester grain tanks and unloading systems.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This document, when used together with ISO 4254-1, specifies the safety requirements and their
verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters
and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising
from the intended use of these machines by one person (the operator) in the course of normal operation
and service. In addition, it specifies the type of information on safe working practices to be provided by
the manufacturer.
When provisions of this document are different from those which are stated in ISO 4254-1, the
provisions of this document take precedence over the provisions of ISO 4254-1 for machines that have
been designed and built according to the provisions of this document.
This document, taken together with ISO 4254-1, deals with all the significant hazards (as listed in
Table A.1), hazardous situations and events relevant to combine harvesters, forage harvesters, cotton
harvesters and sugar cane harvesters, when they are used as intended and under the conditions of
misuse that are reasonably foreseeable by the manufacturer (see Annex A). It is not applicable to hazards
arising from the presence of persons other than the operator, cleaning of the grain tank, and hazards
related to vibrations and moving parts for power transmission, except for strength requirements for
guards and barriers. In respect of braking and steering, it is applicable only to the ergonomic aspects
(e.g. location of brake pedal and steering wheel); no other aspects related to braking and steering are
covered. In the case of trailed harvesters, it is applicable only to hazards related to the working process.
Design requirements for roll-over protective structures (if applicable) are not specified in this
document.
Performance levels (or categories) for safety-related parts of control systems in accordance with
ISO 25119 or ISO 13849 are not given in this document.
NOTE Specific requirements related to road traffic regulations are not taken into account in this document.
This document is not applicable to machines manufactured before the date of its publication.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-7:2017, when used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
When provisions of ISO 4254-7:2017 are different from those which are stated in ISO 4254‑1, the provisions of ISO 4254-7:2017 take precedence over the provisions of ISO 4254‑1 for machines that have been designed and built according to the provisions of ISO 4254-7:2017.
ISO 4254-7:2017, taken together with ISO 4254‑1, deals with all the significant hazards (as listed in Table A.1), hazardous situations and events relevant to combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A). It is not applicable to hazards arising from the presence of persons other than the operator, cleaning of the grain tank, and hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers. In respect of braking and steering, it is applicable only to the ergonomic aspects (e.g. location of brake pedal and steering wheel); no other aspects related to braking and steering are covered. In the case of trailed harvesters, it is applicable only to hazards related to the working process.
Design requirements for roll-over protective structures (if applicable) are not specified in ISO 4254-7:2017.
Performance levels (or categories) for safety-related parts of control systems in accordance with ISO 25119 or ISO 13849 are not given in ISO 4254-7:2017.
NOTE Specific requirements related to road traffic regulations are not taken into account in ISO 4254-7:2017.
ISO 4254-7:2017 is not applicable to machines manufactured before the date of its publication.

  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    58 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-7:2017, when used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. When provisions of ISO 4254-7:2017 are different from those which are stated in ISO 4254‑1, the provisions of ISO 4254-7:2017 take precedence over the provisions of ISO 4254‑1 for machines that have been designed and built according to the provisions of ISO 4254-7:2017. ISO 4254-7:2017, taken together with ISO 4254‑1, deals with all the significant hazards (as listed in Table A.1), hazardous situations and events relevant to combine harvesters, forage harvesters, cotton harvesters and sugar cane harvesters, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Annex A). It is not applicable to hazards arising from the presence of persons other than the operator, cleaning of the grain tank, and hazards related to vibrations and moving parts for power transmission, except for strength requirements for guards and barriers. In respect of braking and steering, it is applicable only to the ergonomic aspects (e.g. location of brake pedal and steering wheel); no other aspects related to braking and steering are covered. In the case of trailed harvesters, it is applicable only to hazards related to the working process. Design requirements for roll-over protective structures (if applicable) are not specified in ISO 4254-7:2017. Performance levels (or categories) for safety-related parts of control systems in accordance with ISO 25119 or ISO 13849 are not given in ISO 4254-7:2017. NOTE Specific requirements related to road traffic regulations are not taken into account in ISO 4254-7:2017. ISO 4254-7:2017 is not applicable to machines manufactured before the date of its publication.

  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    45 pages
    English language
    sale 15% off
  • Standard
    45 pages
    French language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

This standard, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted and trailed bale wrappers for forage bales. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-14:2016 intended to be used together with ISO 4254‑1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed, and stationary bale wrapper for bales of agricultural harvesting products including wrappers which are combined or integrated with pick-up balers.
It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
NOTE 1 Requirements for self-propelled bale wrappers may be added during the next revision of this part of ISO 4254.
NOTE 2 Examples of these machines are given in Annex A.
NOTE 3 Requirements for pick-up balers are specified in ISO 4254‑11.
When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254‑1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254‑1 for machines that have been designed and built according to the requirements of this part of ISO 4254.
This part of ISO 4254, taken together with ISO 4254‑1, deals with all the significant hazards (as listed in Table 1), hazardous situations, and events relevant to mounted, semi-mounted, and trailed bale wrappers including wrappers which are combined with pick-up balers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4).
ISO 4254-14:2016 is not applicable to the following:
- non-mobile fixed bale wrappers;
- tube/inline wrappers;
- wrapping process that concerns only the circumferential part of the bale and that occurs in the bale chamber;
- the integrity of safety related parts of control systems with regard to the specification of performance levels;
- environmental hazards (except noise), road safety, and hazards related to moving parts for power transmission;
- hazards related to maintenance or repairs carried out by professional service personnel.
NOTE 4 Specific requirements related to road traffic regulations are not taken into account in this part of ISO 4254.
ISO 4254-14:2016 is not applicable to machines manufactured before the date of its publication.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    English language
    sale 15% off
  • Standard
    1 page
    French language
    sale 15% off

This part of IS0 6689 specifies terms and definitions
relating to combines and their component parts. In
association with IS0 6689-2, which lays down
methods of measuring characteristics and
performance requirements for the terms defined, this
part of IS0 6689 identifies dimensions and other
characteristics aimed at allowing comparison of
operations of the component parts.

  • Standard
    24 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day

This part of IS0 6689 specifies the methods and requirements in assessing the dimensions and performance of a
combine and its functional components as defined in IS0 6689-l. It also allows comparison of combine
performance through comparative testing.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

ISO 5718:2013 specifies requirements for blades used on rotary disk mowers and rotary drum mowers, mounted, semi-mounted, trailed, or self-propelled, as used for forage crop harvesting in agriculture only. It specifies requirements for testing and marking of such blades. A bend test and impact test for checking the brittleness and toughness of the material is also included. It does not specify dimensional requirements.

  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    8 pages
    French language
    sale 15% off

This part of ISO 4254, to be used together with ISO/FDIS 4254-1:2004, specifies safety requirements and their verification for the design and construction of rotary mowers and flail-mowers with one or several vertical axes or a horizontal axis, mounted, semi-mounted,trailed or self-propelled. In addition, this document specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-12:2012, where used with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary disc mowers, rotary drum mowers, as used for forage crop harvesting in agriculture only, and flail mowers with a horizontal axis for use in agriculture only, that are mounted, semi-mounted, trailed or self-propelled. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
Flail mowers with a horizontal axis that can be opened at the rear only for maintenance reasons are included.
ISO 4254-12:2012 is also applicable to mowers equipped with a conditioning device and only to mowers intended to work at ground level.
ISO 4254-12:2012, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events (with the exception of noise and vibrations) relevant to rotary disc mowers, rotary drum mowers and flail mowers, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer.
It is not applicable to flail mowers that have the rear part which can be opened for particular field use operations, mowers with an articulated arm, mowers with one or more vertical axes designed for mulching, pedestrian-controlled motor mowers, lawn mowers, inter-row mowing units and machines specifically designed for highway and road maintenance.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-12:2012, where used with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary disc mowers, rotary drum mowers, as used for forage crop harvesting in agriculture only, and flail mowers with a horizontal axis for use in agriculture only, that are mounted, semi-mounted, trailed or self-propelled. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. Flail mowers with a horizontal axis that can be opened at the rear only for maintenance reasons are included. ISO 4254-12:2012 is also applicable to mowers equipped with a conditioning device and only to mowers intended to work at ground level. ISO 4254-12:2012, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events (with the exception of noise and vibrations) relevant to rotary disc mowers, rotary drum mowers and flail mowers, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer. It is not applicable to flail mowers that have the rear part which can be opened for particular field use operations, mowers with an articulated arm, mowers with one or more vertical axes designed for mulching, pedestrian-controlled motor mowers, lawn mowers, inter-row mowing units and machines specifically designed for highway and road maintenance.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off

ISO 17101-2:2012 gives specifications and acceptance criteria for the thrown-object testing of flail mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: large rotary mowers; rotary mowers; mowers with an articulated arm; mowers with one or more vertical axis designed for mulching; pedestrian controlled motor mowers; lawn mowers or machines designed as lawn mowers; inter-row mowing units; machines designed for highway and road maintenance only; flail mowers that have the rear part which can be opened for particular field use operations (e.g. row-crop mowers).

  • Standard
    30 pages
    English language
    sale 15% off
  • Standard
    30 pages
    French language
    sale 15% off

ISO 17101-1:2012 gives specifications and acceptance criteria for thrown-object testing of rotary mowers used in agriculture. Examples of machines are shown. It is not applicable to the following: flail mowers; mowers with an articulated arm; mowers with one or more vertical axis designed for mulching; pedestrian-controlled motor mowers; lawn mowers or machines designed as lawn mowers; inter-row mowing units; machines designed for highway and road maintenance only.

  • Standard
    28 pages
    English language
    sale 15% off
  • Standard
    28 pages
    French language
    sale 15% off

ISO 11806-2:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a back-pack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
ISO 11806-2:2011 is not applicable to lawn-edge trimmers or to brush-cutters equipped with metallic blades consisting of more than one part, e.g. pivoting chain.
ISO 11806-2:2011, taken together with the relevant clauses of ISO 11806-1, deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the back-pack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 11806-1:2011 gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
ISO 11806-1:2011 deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
ISO 11806-1:2011 is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, e.g. pivoting chains or flail blades.
ISO 11806-1:2011 is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4254, to be used together with ISO/FDIS 4254-1:2004, specifies safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers independent of the shape or size of the bales formed. In addition, this document specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

TC - Editorial modifications to the Foreword of the EN ISO text.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-11:2010, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, independent of the shape or size of the bales formed. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
ISO 4254-11:2010, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer.
ISO 4254-11:2010 is not applicable to pedestrian-controlled round balers, environmental hazards, road safety, vibration and hazards related to moving parts for power transmission. It is not applicable to hazards related to maintenance or repairs carried out by professional service personnel.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-11:2010, intended to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, independent of the shape or size of the bales formed. It describes methods for the elimination or reduction of hazards arising from the intended use and reasonably foreseeable misuse of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. ISO 4254-11:2010, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to self-propelled and trailed pick-up balers, including the combination of pick-up balers with wrappers, when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer. ISO 4254-11:2010 is not applicable to pedestrian-controlled round balers, environmental hazards, road safety, vibration and hazards related to moving parts for power transmission. It is not applicable to hazards related to maintenance or repairs carried out by professional service personnel.

  • Standard
    15 pages
    English language
    sale 15% off
  • Standard
    17 pages
    French language
    sale 15% off

TC - Editorial modifications to the Foreword of the EN ISO text.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This part of ISO 4254, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary tedders, rotary rakes and rotary tedder-rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer. This part of ISO 4254 is not applicable to: a) machines with ground-driven tines or ground-wheel-driven tines (e.g. sunflower rakes); b) parallel bar rakes; c) chain or endless belt type rakes; d) pedestrian-controlled tedders and rakes; e) machines equipped with a pick-up device. When requirements of this part of ISO 4254 are different from those which are stated in ISO 4254-1, the requirements of this part of ISO 4254 take precedence over the requirements of ISO 4254-1 for machines that have been designed and built according to the provisions of this part of ISO 4254. This part of ISO 4254, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to rotary tedders, rotary rakes and rotary tedder-rakes when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4), excepting the hazards arising from: - the environment, other than noise; - electromagnetic compatibility; - vibration; - overturning in regard to the protection of the operator at the driving station of a self-propelled machine; - moving parts for power transmission except strength requirements for guards and barriers; - safety and reliability of control systems.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies specific safety requirements and their verification for the design and construction of all sugar beet and fodder beet harvesting machines trailed, mounted or self-propelled which carry out one or more of the following operations: leaf stripping, topping, lifting, picking-up, cleaning, conveying and unloading of beet. This standard is not applicable to cleaner-loaders which operate from a heap of beet. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with. Environmental aspects have not been considered in this standard. This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the safety requirements and test methods for the design and construction of inter-row mowing units with vertical spindles mounted on grass cutting machines such as flail mowers, used in agriculture, forestry and landscaping to cut the grass in the area between two successive obstruction. It describes methods for elimination or reduction of risks arising from their use. In addition, it specifies the type of information on safe working practices to be provided by the manufacturer. This standard is not applicable to rotary mowers and flail-mowers which are covered by EN 745. Environmental aspects have not been considered in this standard. This European Standard is not applicable to inter-row mowing units which are manufactured before the date of publication of this document by CEN.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-10:2009, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary tedders, rotary rakes and rotary tedder–rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer.
ISO 4254-10:2009 is not applicable to: machines with ground­‑driven tines or ground‑wheel–driven tines (e.g. sunflower rakes); parallel bar rakes; chain or endless belt type rakes; pedestrian‑controlled tedders and rakes; machines equipped with a pick-up device.
ISO 4254-10:2009, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to rotary tedders, rotary rakes and rotary tedder­–rakes when they are used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from: the environment, other than noise; electromagnetic compatibility; vibration; overturning in regard to the protection of the operator at the driving station of a self-propelled machine; moving parts for power transmission except strength requirements for guards and barriers; safety and reliability of control systems.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4254-10:2009, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of rotary tedders, rotary rakes and rotary tedder–rakes, including rotary drum rakes, used by one person (the operator) only, having one or several powered rotors, mounted, semi-mounted, trailed or self-propelled. In addition, it specifies the type of information on safe working practices, including residual risks, to be provided by the manufacturer. ISO 4254-10:2009 is not applicable to: machines with ground­‑driven tines or ground‑wheel–driven tines (e.g. sunflower rakes); parallel bar rakes; chain or endless belt type rakes; pedestrian‑controlled tedders and rakes; machines equipped with a pick-up device. ISO 4254-10:2009, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to rotary tedders, rotary rakes and rotary tedder­–rakes when they are used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from: the environment, other than noise; electromagnetic compatibility; vibration; overturning in regard to the protection of the operator at the driving station of a self-propelled machine; moving parts for power transmission except strength requirements for guards and barriers; safety and reliability of control systems.

  • Standard
    34 pages
    English language
    sale 15% off
  • Standard
    35 pages
    French language
    sale 15% off

ISO 17103:2009 specifies requirements and acceptance criteria for testing the protective skirts of rotary disc mowers, rotary drum mowers and flail mowers used in agriculture.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off

This standard specifies specific safety requirements and their verification for the design and construction of all sugar beet and fodder beet harvesting machines trailed, mounted or self-propelled which carry out one or more of the following operations: leaf stripping, topping, lifting, picking-up, cleaning, conveying and unloading of beet.
This standard is not applicable to cleaner-loaders which operate from a heap of beet.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the safety requirements and test methods for the design and construction of inter-row mowing units with vertical spindles mounted on grass cutting machines such as flail mowers, used in agriculture, forestry and landscaping to cut the grass in the area between two successive obstruction.
It describes methods for elimination or reduction of risks arising from their use.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This standard is not applicable to rotary mowers and flail-mowers which are covered by EN 745.
Environmental aspects have not been considered in this standard.
This European Standard is not applicable to inter-row mowing units which are manufactured before the date of publication of this document by CEN.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies specific safety requirements and their verification for the design and construction of potato harvesting machines trailed, mounted or self-propelled which carry out one or more of the following operations: haulm chopping, lifting, picking-up, cleaning, conveying and unloading of potatoes.
This standard is applicable for machines which can be used without modification for harvesting of other crops.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies safety requirements and their verification for design and construction of self-propelled, mounted or semi-mounted vine shoot tipping machines. These mobile machines are used for trimming vineyard and other fruit tress that grow in the same way (trellising plants) and similar applications. Their cutting tools are either:
-   High speed rotative blades (which cut by impact), or
-   Rotative blade and counter blade (which cut by shearing), or
-   Reciprocating cutting bar (which cuts by shearing).
This standard does not apply to:
-   Tipping machines for free standing fruit bushes,
-   Walk-behind pedestrian controlled machines,
-   Machines intended to be mounted on walk-behind pedestrian controlled machines,
-   Hand-held machines.
NOTE 1   Machines intended to be mounted on walk-behind pedestrian controlled machines will be dealt with in the next revision of this standard.
This standard describes methods for the elimination or reduction of risks which need specific requirements for vine shoot tipping machines. It does not deal with general hazards, particularly general hazards related to mobility, including those specific to self-propelled machines. These aspects will be dealt with in another standard produced by CEN/TC 144 (see introduction).
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.
NOTE 2   This standard does not deal with:
-   the location and the operation of the controls;
-   the adaptability and the setting up of mounted machines on tractors or other vehicles.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies specific safety requirements and their verification for the design and construction of potato harvesting machines trailed, mounted or self-propelled which carry out one or more of the following operations: haulm chopping, lifting, picking-up, cleaning, conveying and unloading of potatoes.
This standard is applicable for machines which can be used without modification for harvesting of other crops.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
The list of significant hazards dealt with in this standard is given in Annex A. Annex A also indicates the hazards which have not been dealt with.
Environmental aspects have not been considered in this standard.
This standard applies primarily to machines which are manufactured after the date of issue of the standard.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 15% off
  • Draft
    18 pages
    French language
    sale 15% off
  • Standard
    8 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This part of IS0 6689 specifies terms and definitions
relating to combines and their component parts. In
association with IS0 6689-2, which lays down
methods of measuring characteristics and
performance requirements for the terms defined, this
part of IS0 6689 identifies dimensions and other
characteristics aimed at allowing comparison of
operations of the component parts.

  • Standard
    24 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day

This part of IS0 6689 specifies the methods and requirements in assessing the dimensions and performance of a
combine and its functional components as defined in IS0 6689-l. It also allows comparison of combine
performance through comparative testing.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    4 pages
    French language
    sale 15% off
  • Standard
    4 pages
    French language
    sale 15% off