SIST EN 14149:2003

Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop

This European Standard specifies methods for carrying out a rotational impact test on complete, filled transport packages or unit loads, by dropping.  It can be performed either as a single test to investigate the effects of rotational impact or as part of a sequence of tests designed to measure the ability of a package or unit load to withstand a distribution system that includes a rotational impact hazard.

Verpackung - Versandfertige Packstücke und Ladeeinheiten - Vertikale Stoßprüfung durch Kippen

1 Anwendungsbereich
Diese Europäische Norm legt Verfahren fest, um an versandfertigen Pack-stücken oder Ladeeinheiten Stoßprüfungen durch Kippen vorzunehmen. Die Prüfung kann entweder als Einzelprüfung durchgeführt werden, um die Einwirkung des Kipp-stoßes auf den Prüfgegenstand festzustellen, oder als Teil einer Sequenz von Prüfungen, um das Widerstandsvermögen eines Packstückes oder einer Ladeeinheit auf Kippstöße zu messen, die in einem Verteilsystem (Transport) auftreten können.

Emballages - Emballages d'expédition et charges unitaires complets et pleins - Essai de choc par chute par basculement

La présente Norme européenne prescrit des méthodes d'essai de choc par chute par basculement sur des emballages d'expédition ou des charges unitaires complets et pleins. Un tel essai peut etre effectué comme essai simple dans le but d'examiner les effets d'un choc par basculement, ou il peut faire partie d'une série d'essais destinés a mesurer la résistance d'un emballage ou d'une charge unitaire dans un systeme de distribution qui comprend un risque de choc par basculement.

Embalaža - Celovita, napolnjena transportna embalaža – Preskus s prevračanjem

General Information

• Status: Published
• Publication Date: 30-Sep-2003
• ICS: 55.180.40 - Complete, filled transport packages
• Technical Committee: EPO - Packaging - sales and grouped
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 01-Oct-2003
• Due Date: 01-Oct-2003
• Completion Date: 01-Oct-2003
• Directive: 80/232/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packaged products
• Directive: 87/356/EEC - Ranges of nominal quantities and nominal capacities permitted for certain pre-packged products (Dir. 80/232/EEC amendment)
• Ref Project: EN 14149:2003 - Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Verpackung - Versandfertige Packstücke und Ladeeinheiten - Vertikale Stoßprüfung durch KippenEmballages - Emballages d'expédition et charges unitaires complets et pleins - Essai de choc par chute par basculementPackaging - Complete, filled transport packages and unit loads - Impact test by rotational drop55.180.40Celovita, napolnjena transportna embalažaComplete, filled transport packagesICS:Ta slovenski standard je istoveten z:EN 14149:2003SIST EN 14149:2003en01-oktober-2003SIST EN 14149:2003SLOVENSKI
STANDARD



SIST EN 14149:2003



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14149August 2003ICS 55.180.40English versionPackaging - Complete, filled transport packages and unit loads -Impact test by rotational dropEmballages - Emballages d'expédition et charges unitairescomplets et pleins - Essai de choc par chute parbasculementVerpackung - Versandfertige Packstücke undLadeeinheiten - Vertikale Stoßprüfung durch KippenThis European Standard was approved by CEN on 10 July 2003.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14149:2003 ESIST EN 14149:2003



EN 14149:2003 (E)2ContentsPageForeword.31Scope.42Normative reference(s).43Terms and definitions.44Principle.45Apparatus.46Test item preparation.57Conditioning.58Procedure.59Test report.9Bibliography.11SIST EN 14149:2003



EN 14149:2003 (E)3ForewordThis document (EN 14149:2003) has been prepared by Technical Committee CEN /TC 261, "Packaging", thesecretariat of which is held by AFNOR.This European Standard shall be given the status of a national standard, either by publication of an identical text orby endorsement, at the latest by February 2004, and conflicting national standards shall be withdrawn at the latestby February 2004.According to the CEN/CENELEC Internal Regulations, the national standards organizations of the followingcountries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,Slovakia, Spain, Sweden, Switzerland and the United Kingdom.SIST EN 14149:2003



EN 14149:2003 (E)41 ScopeThis European Standard specifies methods for carrying out a rotational impact test on complete, filled transportpackages or unit loads, by dropping.
It can be performed either as a single test to investigate the effects ofrotational impact or as part of a sequence of tests designed to measure the ability of a package or unit load towithstand a distribution system that includes a rotational impact hazard.2 Normative reference(s)This European Standard incorporates by dated or undated reference, provisions from other publications.
Thesenormative references are cited at the appropriate places in the text and the publications are listed hereafter.
Fordated references, subsequent amendments to or revision of any of these publications apply to this EuropeanStandard only when incorporated in it by amendment or revision.
For undated references the latest edition of thepublication referred to applies (including amendments).EN 22206, Packaging - Complete, filled transport packages - Identification of parts when testing (ISO 2206:1987)EN ISO 2233, Packaging - Complete, filled transport packages and unit loads - Conditioning for testing (ISO2233:2000)3 Terms and definitionsFor the purposes of this European Standard, the following terms and definitions apply3.1test itemcomplete, filled transport package or unit load4 PrincipleOne edge or corner of the test item is raised to a predetermined height above a rigid impact surface, the oppositeedge or corner resting either on the impact surface, or on one or two blocks of specifi
...