SIST EN 62246-1:2011
(Main)Reed switches - Part 1: Generic specification
Reed switches - Part 1: Generic specification
IEC 62246-1:2011 applies to all types of reed switches including magnetically biased reed switches of assessed quality for use in general and industrial applications. It lists the tests and measurement procedures which may be selected for use in detail specifications for such reed switches. It also specifies the quality assessment procedures to be followed. This new edition includes the following significant technical changes with respect to the previous one: - inclusion of the generic specifications for all types of reed switches, but mercury wetted reed switches have been removed from the scope due to their potential for environmental impact; - inclusion of three fundamental conformity assessment procedures for quality assessment.
Reedschalter - Teil 1: Fachgrundspezifikation
Contacts à lames souples - Partie 1: Spécification générique
La CEI 62246-1:2011 s'applique à tous les types de contacts à lames souples, y compris les contacts à lames souples polarisés magnétiquement ayant une qualité assurée pour être utilisés dans des applications générales et industrielles. Elle énumère les essais et les procédures de mesure qui peuvent être sélectionnés pour être utilisés dans des spécifications particulières relatives à de tels contacts à lames souples. Elle spécifie également les procédures d'évaluation de la qualité devant être suivies. La présente nouvelle édition comporte les modifications techniques significatives suivantes par rapport à l'édition précédente: - ajout de spécifications génériques pour tous les types de contacts à lames souples, mais les contacts à lames souples mouillés au mercure ont été retirés du domaine d'application en raison de leur potentiel d'impact sur l'environnement; - ajout de trois procédures fondamentales d'évaluation de la conformité pour l'évaluation de la qualité.",PE
Stikala reed - 1. del: Splošne zahteve
Ta del serije IEC 62246, ki je splošna specifikacija, velja za vse vrste stikal reed, vključno z magnetno usmerjenimi stikali reed ocenjene kakovosti za uporabo pri splošnih in industrijskih aplikacijah.
OPOMBA 1: Stikala reed, navlažena z živim srebrom, zaradi svojega morebitnega učinka na okolje niso zajeta v tem standardu.
Navaja preskuse in merilne postopke, ki se lahko izberejo za uporabo v podrobnih specifikacijah za taka stikala reed. Ta standard prav tako določa postopke ocenjevanja kakovosti, ki jih je treba upoštevati.
Ta standard velja za stikala reed, ki delujejo na uporabljeno magnetno polje; ni omejen na konkretno vrsto stične obremenitve.
OPOMBA 2: Priporoča se, da se ta standard pri osnovnih relejih s stikali reed uporablja skupaj s standardi IEC 61810-1 in IEC 61811-1, kot je primerno.
OPOMBA 3: Aplikacije stikal reed lahko zajemajo specifični standardi za proizvode in uporaba serije IEC 62246 ne zagotavlja skladnosti s temi standardi.
OPOMBA 4: Kadar iz katerega koli razloga pride do neujemanja, so dokumenti razvrščeni v naslednjem vrstnem redu veljavnosti:
a) podrobna specifikacija,
b) področna specifikacija,
c) splošna specifikacija,
d) kateri koli drug mednarodni dokument (na primer IEC), na katerega je narejen sklic.
Isti prednostni vrstni red velja za enakovredne nacionalne dokumente.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62246-1:2011
01-december-2011
1DGRPHãþD
SIST EN 62246-1:2003
SIST EN 62246-2:2008
Stikala reed - 1. del: Splošne zahteve
Reed switches - Part 1: Generic specification
Reedschalter - Teil 1: Fachgrundspezifikation
Contacts à lames souples - Partie 1: Spécification générique
Ta slovenski standard je istoveten z: EN 62246-1:2011
ICS:
29.120.70 Releji Relays
SIST EN 62246-1:2011 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 62246-1:2011
---------------------- Page: 2 ----------------------
SIST EN 62246-1:2011
EUROPEAN STANDARD
EN 62246-1
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.120.70 Supersedes EN 62246-1:2002, EN 62246-2:2008
English version
Reed switches -
Part 1: Generic specification
(IEC 62246-1:2011)
Contacts à lames souples - Reedschalter -
Partie 1: Spécification générique Teil 1: Fachgrundspezifikation
(CEI 62246-1:2011) (IEC 62246-1:2011)
This European Standard was approved by CENELEC on 2011-03-17. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62246-1:2011 E
---------------------- Page: 3 ----------------------
SIST EN 62246-1:2011
EN 62246-1:2011 - 2 -
Foreword
The text of document 94/314/FDIS, future edition 2 of IEC 62246-1, prepared by IEC TC 94,
All-or-nothing electrical relays, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 62246-1 on 2011-03-17.
This European Standard supersedes EN 62246-1:2002 and EN 62246-2:2008.
This edition includes the following significant technical changes with respect to EN 62246-1:2002 and
EN 62246-2:2008:
– update of references, terms and definitions;
– renumbering of clauses to bring them into a more logical order;
– inclusion of the generic specifications for all types of reed switches, but mercury wetted reed switches
have been removed from the scope due to their potential for environmental impact;
– inclusion of three fundamental conformity assessment procedures for quality assessment;
– improvement of electrical endurance tests covering resistive, inductive, capacitive and filament lamp
contact loads;
– renumbering of all annexes in the order they are referenced in the body of the standard;
– improvement of test procedures;
– inclusion of a new Annex C (informative) for electrical endurance test circuit, an Annex D (informative)
for inrush current loads, an Annex E (informative) for conditional short-circuit current test circuit, an
Annex F (informative) for electrical ratings based on classification, an Annex G (informative) for
example of test arrangement for contact reliability test, an Annex H (informative) for example of test
arrangement for making current capacity test and an Annex I (informative) for example of test
arrangement for breaking current capacity test.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-12-17
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-03-17
Annex ZA has been added by CENELEC.
__________
---------------------- Page: 4 ----------------------
SIST EN 62246-1:2011
- 3 - EN 62246-1:2011
Endorsement notice
The text of the International Standard IEC 62246-1:2011 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60027 series NOTE Harmonized as EN 60027 series (not modified).
IEC 60317-1 NOTE Harmonized as EN 60317-1.
IEC 61000-4-5:2005 NOTE Harmonized as EN 61000-4-5:2006 (not modified).
IEC 61810-1:2008 NOTE Harmonized as EN 61810-1:2008 (not modified).
IEC 61810-2 NOTE Harmonized as EN 61810-2.
IEC 61811-1 NOTE Harmonized as EN 61811-1.
IEC 62246 series NOTE Harmonized as EN 62246 series (not modified).
ISO/IEC 17050-1 NOTE Harmonized as EN ISO/IEC 17050-1.
ISO 9000 NOTE Harmonized as EN ISO 9000.
ISO 9001 NOTE Harmonized as EN ISO 9001.
__________
---------------------- Page: 5 ----------------------
SIST EN 62246-1:2011
EN 62246-1:2011 - 4 -
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance
IEC 60068-2-1 2007 Environmental testing - EN 60068-2-1 2007
Part 2-1: Tests - Test A: Cold
IEC 60068-2-2 2007 Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
IEC 60068-2-6 2007 Environmental testing - EN 60068-2-6 2008
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
2)
IEC 60068-2-7 1983 Environmental testing - EN 60068-2-7 1993
Part 2: Tests. Test Ga: Acceleration, steady
state
IEC 60068-2-11 1981 Environmental testing - EN 60068-2-11 1999
Part 2: Tests - Test Ka: Salt mist
IEC 60068-2-13 1983 Environmental testing - EN 60068-2-13 1999
Part 2: Tests - Test M: Low air pressure
IEC 60068-2-14 2009 Environmental testing - EN 60068-2-14 2009
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-17 1994 Environmental testing - EN 60068-2-17 1994
Part 2: Tests - Test Q: Sealing
IEC 60068-2-20 2008 Environmental testing - EN 60068-2-20 2008
Part 2-20: Tests - Test T: Test methods for
solderability and resistance to soldering heat
of devices with leads
IEC 60068-2-21 2006 Environmental testing - EN 60068-2-21 2006
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices
IEC 60068-2-27 2008 Environmental testing - EN 60068-2-27 2009
Part 2-27: Tests - Test Ea and guidance:
Shock
IEC 60068-2-30 2005 Environmental testing - EN 60068-2-30 2005
Part 2-30: Tests - Test Db: Damp heat, cyclic
(12 h + 12 h cycle)
IEC 60068-2-78 - Environmental testing - EN 60068-2-78 -
Part 2-78: Tests - Test Cab: Damp heat,
steady state
1)
EN 60068-1 includes A1 to IEC 60068-1 + corr. October .
2)
EN 60068-2-7 includes A1 to IEC 60068-2-7.
---------------------- Page: 6 ----------------------
SIST EN 62246-1:2011
- 5 - EN 62246-1:2011
Publication Year Title EN/HD Year
IEC 60096 Series Radio-frequency cables - -
IEC 60410 - Sampling plans and procedures - -
for inspection by attributes
IEC 60947-5-1 2003 Low-voltage switchgear and controlgear - EN 60947-5-1 2004
Part 5-1: Control circuit devices and switching + corr. July 2005
elements - Electromechanical control circuit
devices
IEC QC 001002-1 1998 IEC quality assessment system for electronic - -
components (IECQ) - Rules of procedure -
Part 1: Administration
IEC QC 001002-3 2005 IEC Quality Assessment System for Electronic - -
Components (IECQ) - Rules of Procedure -
Part 3: Approval procedures
---------------------- Page: 7 ----------------------
SIST EN 62246-1:2011
---------------------- Page: 8 ----------------------
SIST EN 62246-1:2011
IEC 62246-1
®
Edition 2.0 2011-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Reed switches –
Part 1: Generic specification
Contacts à lames souples –
Partie 1: Spécification générique
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XC
ICS 29.120.70 ISBN 978-2-88912-358-2
® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 9 ----------------------
SIST EN 62246-1:2011
– 2 – 62246-1 IEC:2011
CONTENTS
FOREWORD . 7
1 Scope . 9
2 Normative references . 9
3 Terms and definitions . 10
3.1 Terms and definitions of reed switch types . 10
3.2 Terms and definitions of operating values . 11
3.3 Terms and definitions related to operating times (see Figure 2) . 13
3.4 Terms and definitions related to contacts . 16
4 Rated values . 18
4.1 General . 18
4.2 Frequency of operation . 19
4.3 Duty factor . 19
4.4 Open-circuit voltage across contacts . 19
4.5 Current rating . 19
4.6 Load ratings . 19
4.7 Number of operations . 19
4.8 Climatic category . 19
4.9 Environmental severities . 20
4.10 Surge voltage . 20
4.11 Classification . 21
4.12 Contact reliability . 21
5 Marking . 21
6 Quality assessment procedures . 22
6.1 General . 22
6.2 Supplier’s declaration of conformity . 22
6.3 Second-party conformity assessment . 22
6.4 Third-party certification. 22
6.5 IECEE scheme . 22
6.6 IECQ system . 22
6.6.1 General . 22
6.6.2 Primary stage of manufacture . 23
6.6.3 Structurally similar components . 23
6.6.4 Subcontracting . 23
6.6.5 Qualification approval procedures. 23
6.6.6 Quality conformance inspection requirements . 23
6.6.7 Delivery of units subjected to destructive tests or non-destructive
tests . 24
6.6.8 Delayed delivery . 24
6.6.9 Supplementary procedure for deliveries . 24
6.6.10 Unchecked parameters . 24
6.6.11 Release for delivery before the completion of Group B tests . 24
6.6.12 Screening procedures . 24
7 Test and measurement procedures . 24
7.1 General . 24
7.2 Alternative procedures . 24
7.3 Standard conditions for testing . 25
---------------------- Page: 10 ----------------------
SIST EN 62246-1:2011
62246-1 IEC:2011 – 3 –
7.4 Visual inspection and check of dimensions . 25
7.4.1 Visual inspection . 25
7.4.2 Outline dimensions . 25
7.4.3 Mass . 25
7.4.4 Information to be stated in the detail specification . 25
7.5 Functional tests . 26
7.5.1 Procedures . 26
7.5.2 Requirements . 27
7.5.3 Information to be stated in the detail specification . 27
7.6 Remanence test (see Figure 3) . 27
7.6.1 Procedure . 27
7.6.2 Requirements . 28
7.6.3 Information to be stated in the detail specification . 28
7.7 Contact circuit resistance . 28
7.7.1 Procedure . 28
7.7.2 Requirements . 29
7.7.3 Information to be stated in the detail specification . 29
7.8 Dielectric test . 30
7.8.1 Procedures . 30
7.8.2 Requirements . 30
7.8.3 Information to be stated in the detail specification . 30
7.9 Insulation resistance . 30
7.9.1 Procedure . 30
7.9.2 Requirements . 31
7.9.3 Information to be stated in the detail specification . 31
7.10 Operating times (see Figures 2, 5 and 6) . 31
7.10.1 Procedure . 31
7.10.2 Requirements . 32
7.10.3 Information to be stated in the detail specification . 32
7.11 Contact sticking . 34
7.11.1 Thermal sticking . 34
7.11.2 Magnetostrictive sticking . 36
7.12 Robustness of terminals . 37
7.12.1 Procedure . 37
7.12.2 Requirements . 37
7.12.3 Information to be stated in the detail specification . 37
7.13 Soldering (solderability and resistance to soldering heat) . 37
7.13.1 Procedure . 37
7.13.2 Requirements . 37
7.13.3 Information to be stated in the detail specification . 37
7.14 Climatic sequence . 38
7.14.1 General . 38
7.14.2 Procedure . 38
7.14.3 Requirements . 38
7.14.4 Information to be stated in the detail specification . 38
7.15 Damp heat, steady state . 39
7.15.1 Procedure . 39
7.15.2 Requirements . 39
7.15.3 Information to be stated in the detail specification . 39
---------------------- Page: 11 ----------------------
SIST EN 62246-1:2011
– 4 – 62246-1 IEC:2011
7.16 Rapid change of temperature . 39
7.16.1 Procedure . 39
7.16.2 Requirements . 39
7.16.3 Information to be stated in the detail specification . 39
7.17 Salt mist . 39
7.17.1 Procedure . 39
7.17.2 Requirements . 40
7.17.3 Information to be stated in the detail specification . 40
7.18 Vibration. 40
7.18.1 Vibration 1 – Functional . 40
7.18.2 Vibration 2 – Survival . 40
7.19 Shock . 41
7.19.1 Procedure . 41
7.19.2 Requirements . 41
7.19.3 Information to be stated in the detail specification . 42
7.20 Acceleration test – Functional test only . 42
7.20.1 Procedure . 42
7.20.2 Requirements . 42
7.20.3 Information to be stated in the detail specification . 42
7.21 Sealing . 42
7.21.1 Procedure . 42
7.21.2 Requirements . 42
7.21.3 Information to be stated in the detail specification . 43
7.22 Electrical endurance . 43
7.22.1 Types of electrical endurance test . 43
7.22.2 Standard electrical endurance tests . 43
7.22.3 General test arrangements . 43
7.22.4 Procedure . 44
7.22.5 Standard load conditions . 45
7.22.6 Requirements . 48
7.22.7 Information to be stated in the detail specification . 49
7.23 Mechanical endurance. 50
7.23.1 General test arrangements . 50
7.23.2 Procedure . 50
7.23.3 Requirements . 51
7.23.4 Information to be stated in the detail specification . 51
7.24 Maximum cycling frequency . 51
7.24.1 Procedure . 51
7.24.2 Requirements . 52
7.24.3 Information to be stated in the detail specification . 52
7.25 Surge withstand test . 52
7.25.1 Procedure . 52
7.25.2 Requirements . 52
7.25.3 Information to be stated in the detail specification . 53
7.26 Making and breaking capacities . 53
7.26.1 General test arrangements . 53
7.26.2 Procedure . 53
7.26.3 Requirements . 53
7.26.4 Information to be stated in the detail specification . 53
---------------------- Page: 12 ----------------------
SIST EN 62246-1:2011
62246-1 IEC:2011 – 5 –
7.27 Conditional short-circuit current test . 56
7.27.1 General test arrangements . 56
7.27.2 Procedure . 56
7.27.3 Requirements . 57
7.27.4 Information to be stated in the detail specification . 57
7.28 Contact reliability test . 57
7.28.1 General . 57
7.28.2 Procedure . 57
7.28.3 Requirements . 58
7.28.4 Information to be stated in the detail specification . 58
7.29 Temperature rise . 59
7.29.1 Procedure . 59
7.29.2 Requirements . 59
7.29.3 Information to be stated in the detail specification . 60
7.30 Making current capacity test . 60
7.30.1 General . 60
7.30.2 Procedure . 60
7.30.3 Requirements . 60
7.30.4 Information to be stated in the detail specification . 60
7.31 Breaking current capacity test . 61
7.31.1 General . 61
7.31.2 Procedure . 61
7.31.3 Requirements . 61
7.31.4 Information to be stated in the detail specification . 62
Annex A (normative) Standard test coils for reed switches . 63
Annex B (normative) Test systems .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.