SIST EN IEC 60947-5-2:2020/A11:2022
(Amendment)Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
EN-IEC 60947-5-2 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects, ultrasonic proximity switches that sense the presence of sound reflecting objects, photoelectric proximity switches that sense the presence of objects and non-mechanical magnetic proximity switches that sense the presence of objects with a magnetic field. Products covered by the scope of this document are not subjected to defined behaviours under fault conditions. Proximity switches with defined behaviour are covered by IEC 60947-5-3 and have to fulfil additional requirements. These proximity switches are self-contained, have semiconductor switching element(s) and are intended to be connected to circuits, the rated voltage of which does not exceed 250 V 50 Hz/60 Hz AC RMS or 300 V DC. Examples of typical applications for in-scope products: - factory automation and machinery industry; - logistic and packaging industry; - conveyor belts, lifts; - process industry; - power plants. Special applications (e.g. corrosive atmosphere) can cause additional requirements. This document is not intended to cover proximity switches with analogue outputs. The object of this document is to state for proximity switches: - definitions; - classification; - characteristics; - product information; - normal service, mounting and transport conditions; - constructional and performance requirements; - tests to verify rated characteristics. Products covered by the scope of this document are expected to be selected, installed, and maintained by skilled personnel only.
Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und Schaltelemente - Näherungsschalter
Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour circuits de commande - Détecteurs de proximité
Nizkonapetostne stikalne in krmilne naprave - 5-2. del: Krmilne naprave in stikalni elementi - Približevalna stikala - Dopolnilo A11
Amandma A11:2022 je dodatek k standardu SIST EN IEC 60947-5-2:2020.
EN-IEC 60947-5-2 se uporablja za induktivna in kapacitativna približevalna stikala, ki zaznavajo kovinske in/ali nekovinske predmete, ultrazvočna približevalna stikala, ki zaznavajo predmete, ki odbijajo zvok, fotoelektrična približevalna stikala, ki zaznavajo predmete, in nemehanska magnetna približevalna stikala, ki zaznavajo predmete z magnetnim poljem. Izdelki, za katere se uporablja ta dokument, niso izpostavljeni določenemu obnašanju ob okvarnih razmerah. Približevalna stikala z opredeljenim obnašanjem so zajeta v standardu IEC 60947-5-3 in morajo izpolnjevati dodatne zahteve. Navedena približevalna stikala so samostojna, imajo polprevodniške stikalne elemente in so namenjena za priključitev v omrežja, katerih naznačena napetost ne presega 250 V 50 Hz/60 Hz izmenične napetosti RMS ali 300 V enosmerne napetosti. Primeri tipične uporabe za izdelke, za katere se standard uporablja: – tovarniška avtomatizacija in strojna industrija; – logistična in embalažna industrija; – tekoči trakovi, dvigala; – predelovalna industrija; – elektrarne. V posebnih primerih uporabe (npr. v korozivni atmosferi) je treba upoštevati dodatne zahteve. Ta dokument ne zajema približevalnih stikal z analognimi izhodi. Cilj tega dokumenta je za približevalna stikala navesti: – definicije; – razvrstitev; – lastnosti; – informacije o izdelku; – običajne pogoje uporabe, montaže in transporta; – konstrukcijske in izvedbene zahteve; – preskuse za preverjanje nazivnih lastnosti. Izdelke, ki spadajo na področje uporabe tega dokumenta, naj bi izbralo, namestilo in vzdrževalo samo usposobljeno osebje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 60947-5-2:2020/A11:2022
01-junij-2022
Nizkonapetostne stikalne in krmilne naprave - 5-2. del: Krmilne naprave in stikalni
elementi - Približevalna stikala - Dopolnilo A11
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching
elements - Proximity switches
Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und Schaltelemente -
Näherungsschalter
Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour
circuits de commande - Détecteurs de proximité
Ta slovenski standard je istoveten z: EN IEC 60947-5-2:2020/A11:2022
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 60947-5-2:2020/A11:2022 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
---------------------- Page: 2 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EUROPEAN STANDARD EN IEC 60947-5-2:2020/A11
NORME EUROPÉENNE
EUROPÄISCHE NORM April 2022
ICS 29.120.40; 29.130.20
English Version
Low-voltage switchgear and controlgear - Part 5-2: Control
circuit devices and switching elements - Proximity switches
Appareillage à basse tension - Partie 5-2: Appareils et Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und
éléments de commutation pour circuits de commande - Schaltelemente - Näherungsschalter
Détecteurs de proximité
This amendment A11 modifies the European Standard EN IEC 60947-5-2:2020; it was approved by CENELEC on 2022-02-28. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60947-5-2:2020/A11:2022 E
---------------------- Page: 3 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
Contents Page
European foreword . 3
1 Modification to Clause 1, “Scope” . 4
2 Additions to Clause 2, “Normative references” . 4
3 Additions to Clause 3, “Terms and Definitions” . 5
4 Addition of Annex ZC, “Proximity switches with integrated radio functionality” . 6
5 Additions to the Bibliography .11
Annex ZA (normative) Normative references to international publications with their corresponding
European publications .12
Annex ZZC (informative) Relationship between this European Standard and the essential
requirements of Directive 2014/53/EU [2014 OJ L153] aimed to be covered .14
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
European foreword
This document (EN IEC 60947-5-2:2020/A11:2022) has been prepared by CLC/TC 121A “Low-voltage
switchgear and controlgear”.
The following dates are fixed:
• latest date by which this document has to be (dop) 2023–02–28
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) 2025–02–28
conflicting with this document have to be
withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 60947-5-2:2020.
It specifies additional safety and EMC requirements for proximity switches that incorporate radio functionality in
a fixed and permanent manner.
This document has been prepared under a Standardization Request given to CENELEC by the European
Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s)
/ Regulation(s).
For relationship with EU Directive(s) / Regulation(s), see informative Annex ZZC, which is an integral part of
this document.
Any feedback and questions on this document should be directed to the users’ national committee. A complete
listing of these bodies can be found on the CENELEC website.
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
1 Modification to Clause 1, “Scope”
Add the following new paragraph and note at the end of the existing text:
“Annex ZC of this document defines requirements in respect of safety under article 3.1(a) and Electromagnetic
Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or
more radio technologies as set out in ZC.4 in a fixed and permanent manner.
NOTE Requirements applicable to the efficient use of radio spectrum are not included in this document. These
requirements can be found in the applicable ETSI product standard(s) for the effective use of the radio spectrum under
article 3.2 of Directive 2014/53/EU.”
2 Additions to Clause 2, “Normative references”
Add the following normative references:
“
EN 55032:2015, Electromagnetic compatibility of multimedia equipment - Emission Requirements
EN IEC 61000-6-4:2019, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
standard for industrial environments
EN IEC 62311:2020, Assessment of electronic and electrical equipment related to human exposure restrictions
for electromagnetic fields (0 Hz to 300 GHz)
EN 62479:2010, Assessment of the compliance of low power electronic and electrical equipment with the basic
restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
ETSI EN 301-489-3, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246
GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
ETSI EN 301-489-17, V3.2.4, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for
ElectroMagnetic Compatibility
ETSI EN 301-489-19, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band
providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing
positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article
3.1(b) of Directive 2014/53/EU
ETSI EN 301-489-33, V2.2.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential
requirements of article 3.1(b) of Directive 2014/53/EU
“
4
---------------------- Page: 6 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
3 Additions to Clause 3, “Terms and Definitions”
Add the following terms and definitions to 3.1:
“
Z.3.1.1
antenna port
port for connection of an antenna used for intentional transmission and/or reception of radiated RF energy
[SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Note deleted.]
Z.3.1.2
exclusion band
frequency range where during immunity test, the radio functionality is not required to meet the performance
criteria defined for the specific test and where the emissions are not assessed
[SOURCE: ETSI EN 303 446-2 (V1.2.1)]
Z.3.1.3
function
operation carried out by an equipment
Note 1 to entry: Functions are related to basic technologies incorporated in the equipment such as radio reception, radio
transmission, emitting light, conversion of physical dimensions to electrical signals.
[SOURCE: ETSI EN 303 446-2 (V1.2.1)]
Z.3.1.4
port
particular interface, of the specified equipment, with the electromagnetic environment
Note 1 to entry: For example, any connection point on an equipment intended for connection of cables to or from that
equipment is considered as a port (see Figure ZC.1).
Note 2 to entry: In the case of integral antenna equipment the antenna port is the same as the enclosure port.
[SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Figure 1 deleted from definition and inserted as
Figure ZC.1, Note 1 to entry updated.]
Z.3.1.5
radio equipment
electrical or electronic product, which intentionally emits and/or receives radio waves for the purpose of radio
communication and/or radio determination, or an electrical or electronic product which must be completed with
an accessory, such as antenna, so as to intentionally emit and/or receive radio waves for the purpose of radio
communication and/or radio determination
[SOURCE: Radio Equipment Directive 2014/53/EU, Article 2.1(1)]
Z.3.1.6
wired network port
point of connection for data and signalling transfers intended to interconnect widely dispersed systems by direct
connection to a single-user or multi-user communication network (for example LAN and similar networks)
Note 1 to entry: These ports can support screened or unscreened cables and can also carry AC or DC power where this
is an integral part of the telecommunication specification.”
5
---------------------- Page: 7 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
Add the following subclause Z.3.5, “Abbreviations”:
“
Z.3.5 Abbreviations
For the purpose of Annex ZC, the abbreviations defined elsewhere in this standard and the following apply:
EMF electromagnetic fields
EUT equipment under test
GNSS global navigation satellite system
LAN local area network
RF radio frequency
RNSS radio-navigation satellite service
ROGNSS receive only global navigation satellite system
ROMES receive only mobile earth station
UWB ultra wide band
“
4 Addition of Annex ZC, “Proximity switches with integrated radio functionality”
Insert the following new Annex ZC:
“
Annex ZC
(normative)
Proximity switches with integrated radio functionality
ZC.1 General
The requirements of the main body of this standard apply unless otherwise stated in this Annex.
This Annex defines additional requirements with respect to safety under article 3.1(a) and Electromagnetic
Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or
more radio technologies as set out in ZC.4 in a fixed and permanent manner.
ZC.2 Additional normative references
The Normative references added to Clause 2 of this document are related specifically to this Annex ZC.
ZC.3 Additional Terms and Definitions
The Terms and Definitions added to Clause 3 of this document are related specifically to this Annex ZC.
ZC.4 Incorporated radio technologies
This annex is applicable if a proximity switch incorporates one or more of the radio technologies set out in
Table ZC.1.
6
---------------------- Page: 8 ----------------------
SIST EN IEC 60947-5-2:2020/A11:2022
EN IEC 60947-5-2:2020/A11:2022 (E)
Table ZC.1 — Incorporated radio technologies
Incorporated radio technology Radio EMC standard Exclusion band definition
a
ETSI EN 301 489–3 (V2.1.1) Subclause 4.6
Short range
b
ETSI EN 301 489–17 (V3.2.3) Subclause 4.3
Broadband data transmission
c
ETSI EN 301 489–19 (V2.1.1) Subclause 4.3
ROMES and ROGNSS
d
ETSI EN 301 489–33 (V2.2.1) Subclause 4.3
UWB
NOTE The subclause number relates to that subclause in the radio EMC standard.
a
Short range devices as defined in the scope of ETSI EN 301 489–3 (V2.1.1).
b
Broadband Data Transmission Systems as defined in the scope of ETSI EN 301 489–17 (V3.2.4) and further
pointed out in Annex B of that standard.
c
ROMES operating in the 1,5 GHz band providing data communications and GNSS receivers operating in the
RNSS band (ROGNSS) providing position, navigation and timing data as defined in the scope of ETSI EN 301 489–
19 (V2.1.1).
d
Ultra-Wideband devices as defined in the scope of ETSI EN 301 489–33 (V2.2.1).
ZC.5 Technical requirements
ZC.5.1 General
ZC.5.2 sets out requirements related to the risk of human exposure to electromagnetic fields.
The requirements specified in 8.2.6 shall be replaced by those defined in ZC.5.3.
NOTE The term “performance requirements” which is used throughout the EN 60947 series of standards is equivalent
to the term “technical requirements”.
ZC.5.2 Basic restrictions related to human exposure of electromagnetic fields
The radio function shall first be assessed in accordance with the requirements set out in EN 62479:2010 by
applying either route B or route C as specified in EN 62479:2010, 4.1. The radio function is deemed to comply
with the requirements if the available antenna power and/or the average total radiated power is less than or
equal to the applicable low-power exclusion level P of the ICNIRP Guidelines, as specified in the first 4 rows
max
of EN 62479:2010, Table A.1.
If the proximity switch is exclusively intended to be used in an industrial environment, the limit P is 200 mW.
max
If P is between 100 mW and 200 mW then the manufacturer’s documentation shall state that this product
max
shall not be used near to head and trunk.
If the intended use of the proximity switch includes exposure to the general public, the limit P is 40 mW. If
max
P is between 20 mW and 40 mW then the manufacturer’s documentation shall state that this product shall
max
not be used near to head and trunk.
If the low-power exclusion level P is not met when applying route B or route C, the radio function shall be
max
further assessed according to EN IEC 62311:2020, Clause 5.
Information on the intended environment (industrial or general public) and any restrictions shall be provided in
addition to the requirements of 6.1.
NOTE A proximity switch without radio functionality is inherently compliant with the exposure limits related to EMF and
therefore f
...
SLOVENSKI STANDARD
SIST EN IEC 60947-5-2:2020/oprAA:2021
01-februar-2021
Nizkonapetostne stikalne in krmilne naprave - 5-2. del: Krmilne naprave in stikalni
elementi - Približevalna stikala - Dopolnilo AA
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching
elements - Proximity switches
Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und Schaltelemente -
Näherungsschalter
Appareillage à basse tension - Partie 5-2: Appareils et éléments de commutation pour
circuits de commande - Détecteurs de proximité
Ta slovenski standard je istoveten z: EN IEC 60947-5-2:2020/prAA
ICS:
29.130.20 Nizkonapetostne stikalne in Low voltage switchgear and
krmilne naprave controlgear
SIST EN IEC 60947-5-2:2020/oprAA:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
---------------------- Page: 2 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EUROPEAN STANDARD DRAFT
EN IEC 60947-5-2:2020
NORME EUROPÉENNE
EUROPÄISCHE NORM
prAA
December 2020
ICS 29.120.40; 29.130.20
English Version
Low-voltage switchgear and controlgear - Part 5-2: Control
circuit devices and switching elements - Proximity switches
Appareillage à basse tension - Partie 5-2: Appareils et Niederspannungsschaltgeräte - Teil 5-2: Steuergeräte und
éléments de commutation pour circuits de commande - Schaltelemente - Näherungsschalter
Détecteurs de proximité
This draft amendment prAA, if approved, will modify the European Standard EN IEC 60947-5-2:2020; it is submitted to CENELEC members
for enquiry.
Deadline for CENELEC: 2021-03-05.
It has been drawn up by CLC/TC 121A.
If this draft becomes an amendment, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
This draft amendment was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 69836 Ref. No. EN IEC 60947-5-2:2020/prAA E
---------------------- Page: 3 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
12 Contents Page
13 European foreword . 3
14 1 Modification to Clause 1, “Scope”. 4
15 2 Addition of Annex ZC, “Proximity switches with integrated radio functionality” . 4
16 3 Additions to the Bibliography . 10
2
---------------------- Page: 4 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
17 European foreword
18 This document (EN IEC 60947-5-2:2020/prAA:2020) has been prepared by CLC/TC121A “Low-voltage
19 switchgear and controlgear”.
20 This document is currently submitted to the Formal Vote.
21 The following dates are proposed:
• latest date by which the existence of this (doa) dor + 3 months
document has to be announced at national
level
• latest date by which this document has to be (dop) dor + 6 months
implemented at national level by publication of
an identical national standard or by
endorsement
• latest date by which the national standards (dow) dor + 27 months
conflicting with this document have to be
withdrawn
22 This document will amend EN IEC 60947-5-2:2020.
23 This document has been prepared under mandate(s) M/536 and M/511 given to CENELEC by the European
24 Commission and the European Free Trade Association, and supports essential requirements of EU Directive
25 2014/53/EU.
26 For the relationship with EU Directive(s) see informative Annex ZZC, which is an integral part of this document.
27 This amendment is expected to be read in conjunction with EN IEC 60947-5-2:2020. It specifies additional
28 safety and EMC requirements for proximity switches that incorporate radio functionality in a fixed and permanent
29 manner.
3
---------------------- Page: 5 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
30 1 Modification to Clause 1, “Scope”
31 Add the following new paragraph and note at the end of the existing text:
32 “Annex ZC of this document defines requirements in respect of safety under article 3.1(a) and Electromagnetic
33 Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or
34 more radio technologies as set out in Clause ZC.2 in a fixed and permanent manner.
35 NOTE Requirements applicable to the efficient use of radio spectrum are not included in this document. These
36 requirements can be found in the applicable ETSI product standard(s) for the effective use of the radio spectrum under
37 article 3.2 of Directive 2014/53/EU.”
38 2 Additions to Clause 2, "Normative references"
39 Add the following normative references:
40 “
41 EN 55032:2015, Electromagnetic compatibility of multimedia equipment - Emission Requirements
42 EN IEC 61000-6-4:2019, Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission
43 standard for industrial environments
44 EN IEC 62311:2020, Assessment of electronic and electrical equipment related to human exposure restrictions
45 for electromagnetic fields (0 Hz to 300 GHz)
46 EN 62479:2010, Assessment of the compliance of low power electronic and electrical equipment with the basic
47 restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz)
48 ETSI EN 301-489-3, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
49 Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 kHz and 246
50 GHz; Harmonised Standard covering the essential requirements of article 3.1(b) of Directive 2014/53/EU
1
51 ETSI EN 301-489-17, V3.2.3, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
52 Part 17: Specific conditions for Broadband Data Transmission Systems; Harmonised Standard for
53 ElectroMagnetic Compatibility
54 ETSI EN 301-489-19, V2.1.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
55 Part 19: Specific conditions for Receive Only Mobile Earth Stations (ROMES) operating in the 1,5 GHz band
56 providing data communications and GNSS receivers operating in the RNSS band (ROGNSS) providing
57 positioning, navigation, and timing data; Harmonised Standard covering the essential requirements of article
58 3.1(b) of Directive 2014/53/EU
59 ETSI EN 301-489-33, V2.2.1, ElectroMagnetic Compatibility (EMC) standard for radio equipment and services;
60 Part 33: Specific conditions for Ultra-WideBand (UWB) devices; Harmonised Standard covering the essential
61 requirements of article 3.1(b) of Directive 2014/53/EU"
1
Final Draft (under approval at the time of vote).
4
---------------------- Page: 6 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
62 3 Additions to Clause 3, "Terms and Definitions"
63 Add the following terms and definitions to 3.1:
64 "
65 Z.3.1.1
66 antenna port
67 port for connection of an antenna used for intentional transmission and/or reception of radiated RF energy
68 [SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Note deleted.]
69 Z.3.1.2
70 exclusion band
71 frequency range where during immunity test, the radio functionality is not required to meet the performance
72 criteria defined for the specific test and where the emissions are not assessed
73 [SOURCE: ETSI EN 303 446-2 (V1.2.1)]
74 Z.3.1.3
75 function
76 operation carried out by an equipment
77 Note 1 to entry: Functions are related to basic technologies incorporated in the equipment such as radio
78 reception, radio transmission, emitting light, conversion of physical dimensions to electrical signals.
79 [SOURCE: ETSI EN 303 446-2 (V1.2.1)]
80 Z.3.1.4
81 port
82 particular interface, of the specified equipment, with the electromagnetic environment
83 Note 1 to entry: For example, any connection point on an equipment intended for connection of cables to or from that
84 equipment is considered as a port (see Figure ZC.1).
85 Note 2 to entry: In the case of integral antenna equipment the antenna port is the same as the enclosure port.
86 [SOURCE: ETSI EN 303 446-2 (V1.2.1), modified – Figure 1 deleted from definition and inserted as
87 Figure ZC.1, Note 1 to entry updated.]
88 Z.3.1.5
89 radio equipment
90 electrical or electronic product, which intentionally emits and/or receives radio waves for the purpose of radio
91 communication and/or radio determination, or an electrical or electronic product which must be completed with
92 an accessory, such as antenna, so as to intentionally emit and/or receive radio waves for the purpose of radio
93 communication and/or radio determination
94 [SOURCE: Radio Equipment Directive 2014/53/EU, Article 2.1(1)]
95 Z.3.1.6
96 wired network port
97 point of connection for data and signaling transfers intended to interconnect widely dispersed systems by direct
98 connection to a single-user or multi-user communication network (for example LAN and similar networks)
99 Note 1 to entry: These ports can support screened or unscreened cables and can also carry AC or DC power where this
100 is an integral part of the telecommunication specification."
5
---------------------- Page: 7 ----------------------
SIST EN IEC 60947-5-2:2020/oprAA:2021
EN IEC 60947-5-2:2020/prAA (E)
101
Add the following subclause Z.3.5, "Abbreviations":
102 "Z.3.5 Abbreviations
103 For the purpose of this annex, the abbreviations defined elsewhere in this standard and the following apply:
EMF electromagnetic fields
EUT equipment under test
GNSS global navigation satellite system
LAN local area network
RF radio frequency
RNSS radio-navigation satellite service
ROGNSS receive only global navigation satellite system
ROMES receive only mobile earth station
UWB ultra wide band
104 "
105 4 Addition of Annex ZC, “Proximity switches with integrated radio functionality”
106 Insert the following new Annex ZC:
107 "
108 Annex ZC
109 (normative)
110
111 Proximity switches with integrated radio functionality
112 ZC.1 General
113 The requirements of the main body of this standard apply unless otherwise stated in this Annex.
114 This Annex defines additional requirements in respect to safety under article 3.1(a) and Electromagnetic
115 Compatibility (EMC) under article 3.1(b) of Directive 2014/53/EU for proximity switches that incorporate one or
116 more radio technologies as set out in Clause ZC.2 in a fixed and permanent manner.
117 ZC.2 Inc
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.