Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working

This European Standard specifies the technical requirements to minimize the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorized representative. This European Standard applies to trailers that are not intended to interact with operate signalling and control systems. Other machines are dealt with in other European Standards; see Annex E. These trailers are not designed or intended for operating signalling and control systems and are only intended to work and run under special operating conditions specifically designated by the infrastructure manager.

Bahnanwendungen - Oberbau - Anhänger und zugehörige Ausstattung - Teil 1: Technische Anforderungen an das Fahren und den Arbeitseinsatz

1.1   Allgemeines
Diese Europäische Norm legt die technischen Anforderungen zur Minimierung eisenbahnspezifischer Gefahren von Anhängern und zugehöriger Ausstattung fest, die bei der Inbetriebnahme, dem Betrieb und der Instandhaltung von Anhängern, den Anweisungen des Herstellers oder seinem berechtigten Vertreter folgend, entstehen können. Diese Europäische Norm gilt für Anhänger, die nicht für den Betrieb von Signal- und Steuerungssysteme vorgesehen sind. Ähnliche Maschinen werden in anderen Europäischen Normen behandelt, siehe Anhang E.
Diese Anhänger sind nicht für den Betrieb von Signal- und Steuerungssysteme vorgesehen. Sie sind nur für den Arbeitseinsatz und das Fahren bei besonderen Betriebsbedingungen, speziell vom Infrastrukturunternehmer festgelegt, vorgesehen.
ANMERKUNG    1   Diese Anhänger sind keine Fahrzeuge nach der Interoperabilitätsrichtlinie und dürfen nicht auf den Eisenbahnstrecken offen zum normalen Verkehr fahren. Wenn dies verlangt wird, benötigen sie eine Zulassung oder Inbetriebnahme nach der Interoperabilitätsrichtlinie 2008/57/EG.  
Teil 1 dieser Europäischen Norm behandelt die technischen Eisenbahnanforderungen. Teil 2 behandelt die Anforderungen an die Anhänger für die Konformität, die der Hersteller bestätigt, mit Ausnahme von Anhängern, die nach der Maschinenrichtlinie (2006/42/EG), Anhang 4 klassifiziert sind und eine Konformitätsprüfung durch eine notifizierte Stelle benötigen.
Für das Fahren auf Infrastrukturen mit schmalen Spurweiten oder auf Breitspurstrecken, Straßenbahnlinien, von Eisenbahnen, die eine andere Haftreibung zwischen Schiene und Rad nutzen, und Infrastrukturen im Untergrund können zusätzliche Anforderungen bestehen.
Diese Europäische Norm gilt auch für Anhänger und zugehörige Ausrüstungen, die sich in Arbeitstellung teilweise auf dem Schotter oder dem Untergrund (Planum) abstützen.
Wenn zwei oder mehrere Anhänger für das Fahren von Lasten in einer bestimmten Anordnung eingesetzt werden, z. B. wenn ein Eisencontainer an zwei schmalen Anhängern befestigt ist, muss das ganze System als ein Anhänger betrachtet werden und den Anforderungen dieser Europäischen Norm entsprechen.
Diese Europäische Norm gilt nicht für:
-   Anforderungen an die Qualität von Arbeiten oder die Leistung des Anhängers;
-   spezielle Anforderungen für die Nutzung der Anhänger, festgelegt von dem Eisenbahn-infrastrukturbetreiber, die der Absprache zwischen Hersteller und Betreiber unterliegen;
-   einzelne Maschinen, die zeitweise auf dem Anhänger montiert sind.
Diese Europäische Norm legt keine zusätzlichen Anforderungen für Folgendes fest:
-   Einsätze, die besonderen Regeln unterliegen, z. B. explosionsgefährdete Umgebungen;
-   Gefahren aufgrund natürlicher Ursachen, z. B. Erdbeben, Blitzschlag, Überschwemmung;
-   Arbeitsverfahren;
-   Einsätze unter schweren Arbeitsbedingungen, die besondere Maßnahmen erfordern, z. B. bei Arbeiten in Tunneln oder in Streckenabschnitten mit außergewöhnlichen Bedingungen (unter -20° C oder über
+ 40° C), korressiven Umgebungen, kontaminierten Umgebungen, starken Magnetfeldern;
-   Gefahren aufgrund von Fehlern in der Software;
-   Gefahren durch frei schwingende Lasten.
ANMERKUNG 2   Der Einsatz dieser Anhänger darf betrieblichen Parameter unterliegen, festgelegt von jedem Infrastrukturunternehmer, z. B. maximal erlaubte Arbeitsgeschwindigkeit ist vom Infrastrukturunternehmer festzulegen. Die Übereinstimmung mit den Abschnitten dieser Norm darf nicht zur Erlaubnis des Fahrens von Anhängern mit dieser Geschwindigkeit führen. Diese Anhänger sind nicht auf einem offenen Gleis mit normalem Eisenbahnverkehr erlaubt.    
1.2   Gültigkeit der Norm
Diese Europäische Norm gilt für alle Anhänger, die ein Jahr nach dem Datum der Veröffentlichung von CEN dieser Norm bestellt werden.

Applications ferroviaires - Voie - Remorques et éléments associés - Partie 1 : Prescriptions techniques pour la circulation et le travail

1.1   Généralités
La présente Norme européenne spécifie des prescriptions techniques pour minimiser les risques de danger spécifiques au domaine ferroviaire des remorques et de leurs équipements associés. Ces risques peuvent se produire lors des opérations de mise en service, d’exploitation et de maintenance des remorques lorsqu’elles sont réalisées conformément aux spécifications données par le fabricant ou son mandataire. La présente Norme européenne s’applique aux remorques qui ne sont pas prévues pour interagir avec les systèmes de signalisation et de commande en exploitation. D’autres Normes européennes traitent d’autres machines; voir l’Annexe E.
Ces remorques ne sont pas conçues ou prévues pour faire fonctionner les systèmes de signalisation et de commande en exploitation; elles sont uniquement destinées à se déplacer et à travailler dans des conditions particulières d’exploitation définies par le gestionnaire d’infrastructure.
Ces remorques ne sont pas prévues pour être des véhicules tels que définis dans la Directive Interopérabilité et ne sont pas autorisées à circuler sur les lignes ferroviaires ouvertes à un trafic normal. Si nécessaire, elles devront être autorisées ou mises en service conformément à la directive 2008/57/CE relative à l’interopérabilité.
La Partie 1 de la présente Norme européenne traite des exigences ferroviaires techniques ; la Partie 2 définit les prescriptions relatives à la « déclaration de conformité » d’une remorque par le fabricant, à l’exception de celles classées dans l’Annexe 4 de la Directive Machine (2006/42/CE) qui exige une vérification de la conformité par un organisme autorisé.
Des prescriptions supplémentaires peuvent s’appliquer pour la circulation sur les infrastructures ferroviaires à voies larges ou étroites ; sur des lignes de tramway ; sur des chemins de fer autres que ceux à adhérence rail/roue et sur des infrastructures ferroviaires souterraines.
La présente Norme européenne s’applique aussi aux remorques et à leurs équipements associés qui, en configuration de travail, prennent partiellement appui sur le ballast ou sur la plate-forme.
Lorsque deux ou plusieurs remorques sont utilisées ensemble pour transporter des charges en composition fixe, par exemple lorsqu’un conteneur métallique est fixé à deux petites remorques, l’ensemble du système doit être traité comme une remorque pour satisfaire aux exigences de la présente Norme européenne.
La présente Norme européenne ne s’applique pas:
   aux exigences relatives à la qualité du travail ou aux performances de la remorque;
   aux exigences spécifiques fixées par chaque exploitant d’infrastructure ferroviaire pour l’emploi des remorques et qui font l’objet de négociations entre le fabricant et l’exploitant;
   aux machines séparées montées pour une durée temporaire sur la remorque.
La présente Norme européenne ne tient pas compte des prescriptions supplémentaires suivantes:
   mise en œuvre de la machine dans des conditions faisant l’objet de règles spéciales, par exemple atmosphère potentiellement explosive;
   risques dus à des causes naturelles, par exemple tremblement de terre, foudre, inondation, etc.;
   méthodes de travail;
   exploitation dans des conditions de travail sévères nécessitant des mesures particulières, par exemple : travail en tunnels ou en tranchées, conditions climatiques extrêmes (en dessous de - 20 °C ou au-dessus de + 40 °C), environnements corrosifs ou contaminants, champs magnétiques de forte intensité;
   risques dus à des erreurs de logiciels;

Železniške naprave - Zgornji ustroj - Vlečena vozila za posebne namene in spremljajoča oprema - 1. del: Tehnične zahteve, ki se nanašajo na vožnjo in na delovanje

Ta evropski standard določa tehnične zahteve za zmanjšanje posebnih železniških nevarnosti vlečenih vozil za posebne namene in spremljajoče opreme, do katerih lahko pride med začetkom delovanja, delovanjem in vzdrževanjem vlečenih vozil za posebne namene, kadar to poteka v skladu s specifikacijo, ki jo zagotovi proizvajalec ali njegov pooblaščeni predstavnik. Ta evropski standard se uporablja za vlečena vozila za posebne namene, ki niso namenjena interakciji z delujočimi signalizacijskimi in nadzornimi sistemi. Drugi stroji so obravnavani v drugih evropskih standardih; glej dodatek E. Ta vlečena vozila za posebne namene niso oblikovana ali namenjena za upravljanje signalizacijskih in nadzornih sistemov ter so namenjena le delovanju in vožnji pod posebnimi obratovalnimi pogoji, ki jih izrecno določi upravitelj infrastrukture.

General Information

Status
Published
Publication Date
05-May-2013
Technical Committee
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
03-May-2013
Due Date
08-Jul-2013
Completion Date
06-May-2013

Relations

Buy Standard

Standard
SIST EN 15954-1:2013
English language
52 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GHORYDQMHBahnanwendungen - Oberbau - Anhänger und zugehörige Ausstattung - Teil 1: Technische Anforderungen an das Fahren und den ArbeitseinsatzApplications ferroviaires - Voie - Remorques et éléments associés - Partie 1 : Prescriptions techniques pour la circulation et le travailRailway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working45.120åLþQLFEquipment for railway/cableway construction and maintenanceICS:Ta slovenski standard je istoveten z:EN 15954-1:2013SIST EN 15954-1:2013en,fr01-junij-2013SIST EN 15954-1:2013SLOVENSKI

STANDARD
SIST EN 15954-1:2013
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15954-1
April 2013 ICS 45.060.20; 45.120 English Version

Railway applications - Track - Trailers and associated equipment - Part 1: Technical requirements for running and working

Applications ferroviaires - Voie - Remorques et éléments associés - Partie 1 : Prescriptions techniques pour la circulation et le travail

Bahnanwendungen - Oberbau - Anhänger und zugehörige Ausstattung - Teil 1: Technische Anforderungen an das Fahren und den Arbeitseinsatz This European Standard was approved by CEN on 3 August 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,

B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15954-1:2013: ESIST EN 15954-1:2013

EN 15954-1:2013 (E) 2 Contents Page Foreword ....................................................................................................................................................... 4 Introduction .................................................................................................................................................. 5 1 Scope ................................................................................................................................................ 6 1.1 General ............................................................................................................................................. 6 1.2 Validity of this European Standard.................................................................................................. 7 2 Normative references ....................................................................................................................... 7 3 Terms and definitions ...................................................................................................................... 8 4 Trailer types  Examples of types of trailer ................................................................................. 12 4.1 Trailer with continuous brake and parking brake ......................................................................... 12 4.2 Trailer with parking/break-away brake only .................................................................................. 12 4.3 Road rail trailer ............................................................................................................................... 13 4.4 Attachment with rail wheels .......................................................................................................... 13 5 Railway specific safety requirements and/or measures ............................................................... 13 5.1 General ........................................................................................................................................... 13 5.2 Gauge ............................................................................................................................................. 13 5.2.1 Running gauge ............................................................................................................................... 13 5.2.2 Trailer in running configuration..................................................................................................... 14 5.2.3 Working limit .................................................................................................................................. 15 5.2.4 Determination of lateral limit of exceedance allowed on curves in working configuration ........ 16 5.2.5 Limits in lower area in working and running configuration ......................................................... 16 5.2.6 Working limit in the upper area ..................................................................................................... 17 5.3 Interaction with the infrastructure ................................................................................................. 18 5.3.1 General ........................................................................................................................................... 18 5.3.2 Main wheels .................................................................................................................................... 18 5.3.3 Auxiliary wheels, auxiliary guides and working parts .................................................................. 18 5.3.4 Loads applied to the ballast .......................................................................................................... 19 5.3.5 Loads applied to the formation ..................................................................................................... 19 5.3.6 Forces on structures as a function of axle load configurations .................................................. 19 5.4 Running safety and prevention of derailment............................................................................... 20 5.4.1 General ........................................................................................................................................... 20 5.4.2 Running safety for trailers running at a speed of 60 km/h < v ≤ 100 km/h .................................. 20 5.4.3 Running safety for trailers running at a speed of v < 60 km/ h .................................................... 20 5.4.4 Track test for all trailers ................................................................................................................. 21 5.5 Stability and prevention of overturning ........................................................................................ 21 5.6 Trailer frame and structure ............................................................................................................ 21 5.6.1 Frame strength for trailers v > 60 km/h ......................................................................................... 21 5.6.2 Frame strength for trailers v ≤ 60 km/h ......................................................................................... 21 5.6.3 Lifting and jacking points .............................................................................................................. 21 5.7 Couplings between trailers and/or towing machine ..................................................................... 23 5.7.1 General ........................................................................................................................................... 23 5.7.2 Special case for trailer that cannot be coupled with other trailers .............................................. 23 5.8 Running gear .................................................................................................................................. 23 5.8.1 General ........................................................................................................................................... 23 5.8.2 Distribution of the wheelset forces in running configuration ...................................................... 24 5.8.3 Trailer rail wheel base .................................................................................................................... 24 5.8.4 Rail wheel, wheel profile ................................................................................................................ 24 5.8.5 Rail wheel arrangements ............................................................................................................... 25 5.8.6 Load on rail wheels ........................................................................................................................ 25 5.8.7 Load on rail wheels in working condition  Maximum rail wheel loads ..................................... 26 SIST EN 15954-1:2013

EN 15954-1:2013 (E) 3 5.8.8 Operation of spring loaded points ................................................................................................. 28 5.9 Rail wheel suspension ................................................................................................................... 28 5.10 Braking ........................................................................................................................................... 28 5.11 Driving and working cabs and places ........................................................................................... 28 5.12 Controls .......................................................................................................................................... 28 5.13 Visibility of the trailer ..................................................................................................................... 28 5.13.1 Lighting – marker lights ................................................................................................................. 28 5.13.2 Light switching arrangements ....................................................................................................... 29 5.13.3 Tail lamps ....................................................................................................................................... 29 5.13.4 Lamp brackets ................................................................................................................................ 29 5.13.5 Colour of the trailer ........................................................................................................................ 31 5.14 Electrical equipment and earth bonding ....................................................................................... 32 5.14.1 Equipotential bonding .................................................................................................................... 32 5.14.2 Antennae ......................................................................................................................................... 32 5.14.3 Pantograph ..................................................................................................................................... 32 5.15 Electro-magnetic compatibility ...................................................................................................... 32 5.15.1 Emissions from trailers .................................................................................................................. 32 5.15.2 Immunity of trailers from railway environment ............................................................................. 33 5.16 On and off tracking ......................................................................................................................... 33 5.16.1 General ........................................................................................................................................... 33 5.16.2 Use of turntables ............................................................................................................................ 33 5.17 Setting up and packing away ......................................................................................................... 33 5.17.1 General ........................................................................................................................................... 33 5.17.2 Emergency recovery of equipment ............................................................................................... 33 5.18 Mobile elevating work platform (MEWP) ....................................................................................... 34 5.19 Exhaust ........................................................................................................................................... 34 6 Marking of the trailers .................................................................................................................... 34 6.1 Warning signs and pictograms ...................................................................................................... 34 6.2 Identification plate .......................................................................................................................... 34 7 User information ............................................................................................................................. 34 8 Verification of the conformity to the requirements and/ or particular safety measures ............. 36 Annex A (informative)

Technical details for buffing and draw gear .......................................................... 37 A.1 General ........................................................................................................................................... 37 A.2 Draw gear constituent parts .......................................................................................................... 37 A.2.1 Coupling part .................................................................................................................................. 37 A.3 Application...................................................................................................................................... 38 A.4 Technical details for coupling parts .............................................................................................. 38 A.5 User information ............................................................................................................................. 39 Annex B (normative)

Special national conditions ..................................................................................... 40 Annex C (normative)

Check list for conformity ......................................................................................... 44 Annex D (informative)

Trailer identification plate ...................................................................................... 48 Annex E (informative)

Structure of European Standards for track construction and maintenance machines ........................................................................................................................................ 49 Bibliography ................................................................................................................................................ 51

SIST EN 15954-1:2013

EN 15954-1:2013 (E) 4 Foreword This document (EN 15954-1:2013) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2013, and conflicting national standards shall be withdrawn at the latest by October 2013. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. EN 15954 Railway applications  Track  Trailers and associated equipment consists of the following parts:  Part 1: Technical requirements for running and working (the present document);  Part 2: General safety requirements. According to the CEN-CENELEC Internal Regulations, the national standards organisations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

SIST EN 15954-1:2013

EN 15954-1:2013 (E) 5 Introduction The machinery concerned and the extent to which hazards, hazardous situations and events are covered are indicated in the scope of this document. This European Standard was prepared to meet the basic requirements of EU Directives to facilitate an open market for goods and services. Trailers as specified in 3.1 form the object of this standard. This standard deals with railway specific risks of the trailers, defined in Clause 4, when running and working on railway infrastructures. The safety requirements in relation to the Machinery Directive 2006/42/EC are dealt with in EN 15954-2 of this series of standards. Deviations or special national conditions are dealt with in Annex B. The risks which exist in all mechanical, electrical, hydraulic, pneumatic and other components of trailers and which are dealt with in the relevant European Standards are not within the scope of this European Standard. If necessary, references are made to appropriate standards of this type. SIST EN 15954-1:2013

EN 15954-1:2013 (E) 6 1 Scope 1.1 General This European Standard specifies the technical requirements to minimise the specific railway hazards of trailers and associated equipment, which can arise during the commissioning, the operation and the maintenance of trailers when carried out in accordance with the specification given by the manufacturer or his authorised representative. This European Standard applies to trailers that are not intended to interact with operating signalling and control systems. Other machines are dealt with in other European Standards; see Annex E. These trailers are not designed or intended for operating signalling and control systems and are only intended to work and run under special operating conditions specifically designated by the infrastructure manager. These trailers are not intended to be vehicles as defined in the Interoperability Directive and are not permitted to run on the railway lines open to normal traffic. If this is required, they will need to be authorised or placed into service as set out in the Interoperability Directive 2008/57/EC. Part 1 of this European Standard deals with the technical railway requirements; Part 2 deals with requirements for the trailer to be declared conformant by the manufacturer, except in the case of trailers classified in Annex 4 of the Machinery Directive 2006/42/EC which require conformity check in conjunction with a notified body.

Additional requirements can apply for running on infrastructures with narrow gauge or broad gauge lines, lines of tramways, railways utilising other than adhesion between the rail and rail wheels, and underground infrastructures. This European Standard is also applicable to trailers and associated equipment that in working configuration are partly supported on the ballast or the formation. Where two or more trailers are used together to transport loads in a fixed formation, e.g. where a metal container is fixed to two small trailers, the whole system is treated as a trailer for the purposes of compliance with the requirements of this European Standard. This European Standard does not apply to the following:  requirements for quality of the work or performance of the trailer;  specific requirements established by the railway infrastructure operator for the use of trailers, which will be the subject of negotiation between the manufacturer and the operator;  separate machines temporarily mounted on the trailer. This European Standard does not establish the additional requirements for the following:  operation subject to special rules, e.g. potentially explosive atmospheres;  hazards due to natural causes, e.g. earthquake, lightning, flooding, etc;  working methods;  operation in severe working conditions requiring special measures, e.g. work in tunnels or in cuttings, extreme environmental conditions (below – 20 °C or above + 40 °C), corrosive environment, contaminating environments, strong magnetic fields;  hazards due to errors in software; SIST EN 15954-1:2013

EN 15954-1:2013 (E) 7  hazards occurring when used to handle suspended loads which may swing freely. The intended use of these trailers may have operational parameters specified by each infrastructure manager; for example, the maximum speed allowed for these trailers is likely to be limited by the infrastructure manager;

compliance with the clauses of this standard does not confer permission for trailers to travel at this speed. These trailers will not be allowed on a track open to normal railway traffic. 1.2 Validity of this European Standard This European Standard applies to all trailers, which are ordered one year after the publication date by CEN of this standard. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 791, Drill rigs  Safety EN 12663-1:2010, Railway applications  Structural requirements of railway vehicle bodies  Part 1: Locomotives and passenger rolling stock (and alternative method for freight wagons) EN 13309, Construction machinery  Electromagnetic compatibility of machines with internal electrical power supply EN 13715, Railway applications  Wheelsets and bogies  Wheels  Tread profile EN 14033-1:2011, Railway applications  Track  Railbound construction and maintenance machines  Part 1: Technical requirements for running EN 14033-2:2008+A1:2011, Railway applications  Track  Railbound construction and maintenance machines  Part 2: Technical requirements for working EN 14363:2005, Railway applications  Testing for the acceptance of running characteristics of railway vehicles — Testing of running behaviour and stationary tests EN 14601, Railway applications  Straight and angled end cocks for brake pipe and main reservoir pipe EN 15273-2:2013, Railway applications  Gauges  Part 2: Rolling stock gauge EN 15528, Railway applications  Line categories for managing the interface between load limits of vehicles and infrastructure EN 15954-2:2013, Railway applications  Track  Trailers and associated equipment  Part 2: General safety requirements EN 50121-3-1:2006, Railway applications  Electromagnetic compatibility  Part 3-1: Rolling stock  Train and complete vehicle EN 50121-3-2:2006, Railway applications  Electromagnetic compatibility  Part 3-2: Rolling stock  Apparatus EN 50122-1, Railway applications  Fixed installations  Electrical safety, earthing and the return circuit  Part 1: Protective provisions against electric shock SIST EN 15954-1:2013

EN 15954-1:2013 (E) 8 EN 60947 (all parts), Low-voltage switchgear and controlgear EN ISO 12100:2010, Safety of machinery  General principles for design  Risk assessment and risk reduction (ISO 12100:2010) 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN ISO 12100:2010 and the following apply. 3.1 trailer non-self propelled machine that can be hauled on rail wheels Note 1 to entry: Trailers are not designed and intended to operate signalling and control systems and are not designed to be transported between work areas on their rail wheels.

Note 2 to entry: This includes attachments with rail wheels. 3.2 road-rail trailer trailer with additional road wheels to enable the trailer to be hauled on both rails and ground 3.3 road-rail machine self propelled machine that can run on rails and ground

Note 1 to entry: It is normally a road vehicle adapted for running on rail, but can be a specially designed rail vehicle for running on the ground. Note 2 to entry: It does not imply that the machine is suitable for use on the public road. 3.4 demountable machine self propelled machine that can run and work on rail and which is not intended to operate signalling and control systems Note 1 to entry: Such a machine is designed to get on and off track by its own means or with other lifting equipment. In the case of demounting by its own means these are not intended for running on the ground. Note 2 to entry: Such a machine is permitted to work on the railway only under special operating conditions granted by the infrastructure manager and run under special conditions granted by the authorising body and/or the infrastructure manager. 3.5 railbound machine on-track machine OTM vehicle specially designed for construction and maintenance of the track and infrastructure, and which is used in different modes: working configuration, running configuration as a self-propelling vehicle, running configuration as a hauled vehicle, when:  it is running on its own rail wheels,  it is designed to have characteristics necessary for the operation of track based train detection systems SIST EN 15954-1:2013

EN 15954-1:2013 (E) 9 3.6 trolley equipment for transport along the track of materials, tools and/or various equipment, moving on wheels or runners and operated by human force only, which is designed so that it can be manually placed on or off the track [SOURCE: EN 14033-1:2011, 3.8, modified] 3.7 portable machine machine designed or adapted to be worked on the track, transportable by hand with or without trolleys or separate supports for movement on rail(s), and be operated by internal combustion, electrical, mechanical, hydraulic, pneumatic energy sources or from an external supply, but not powered for movement along the track

Note 1 to entry: It is designed so that the machine and/or its separate component parts may be manually placed on or off the track.

3.8 mobile elevating work platform MEWP mobile machine that is intended to move persons to working positions where they are carrying out work from the work platform with the intention that persons are getting on and off the work platform at one defined access position and which consists as a minimum of a work platform with controls, an extending structure and a chassis 3.9 host vehicle basic road vehicle or machine which is converted to run on rails 3.10 general attachment components or assembly of components which can be mounted onto the trailer or equipment for a specific use Note 1 to entry: See ISO 6746-1, ISO 6746-2 and ISO 6016. 3.11 railway specific attachment equipment that is capable of being temporarily fixed to and/or powered from a road rail machine or demountable machine but specifically excludes lifting accessories 3.12 lifting accessory loose lifting tackle, i.e. components or equipment not attached to the trailer and placed between the machinery and the load or on the load in order to attach it 3.13 manufacturer body that designs and constructs a trailer, or converts the original machine to a trailer 3.14 running configuration state of trailer when it is on the rail and all movable parts are stowed and secured within the applicable kinematic gauge Note 1 to entry: For the kinematic gauge, see EN 15273-2. SIST EN 15954-1:2013

EN 15954-1:2013 (E) 10 3.15 working configuration configuration of the trailer as soon as any part of the trailer or its equipment is away from the running configuration 3.16 on and off tracking configuration configuration of the trailer when it is in a state that enables it to be on or off tracked 3.17 running moving the trailer in running configuration along the track 3.18 stationary standing on the track with the rail wheels not rotating 3.19 operating track track which is in an acceptable condition to operate normal trains 3.20 working track track that is being maintained for which the geometrical parameters may reach the limiting values and for which special operational restrictions may apply Note 1 to entry: For limiting values, see EN 14033-2:2008+A1:2011, Annex F. 3.21 railway infrastructure all installations required for the running of railway vehicles EXAMPLE Tracks, crossings, catenaries, signals. 3.22 operator person who handles the controls of a machine in order to perform the functions of the machine including towing or controlling a trailer(s) 3.23 train self propelled vehicle/machine or assembly of vehicles/machines attached by couplings conforming to the relevant regulations of the authorised body and/or infrastructure manager 3.24 special train assembly of vehicles/machines/trailers attached by couplings conforming to the relevant regulations of the infrastructure manager

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.