SIST EN ISO 28722:2012
(Main)Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)
Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel panels intended for architecture (ISO 28722:2008)
This International Standard specifies the requirements for enamel-coated, plane, cold-rolled, heavy- and lightgauge
steel panels intended for interior and exterior architectural use. It includes the functional and aesthetic characteristics and resistance to graffiti of these panels and the related coatings.
Emails und Emaillierungen - Merkmale von Emailschichten auf Architektur-Stahlpaneelen (ISO 28722:2008)
Diese Internationale Norm legt die Anforderungen für emaillierte, ebene, aus kaltgewalztem Stahl hergestellte
Architektur-Paneele starker und leichter Ausführung für Innen- und Außenanwendungen fest.
Sie berücksichtigt die funktionellen und ästhetischen Merkmale sowie die Beständigkeit dieser Paneele und
der entsprechenden Beschichtungen gegen Graffiti.
Émaux vitrifiés - Caractéristiques des couches d'émail appliquées sur les panneaux d'acier destinés à l'architecture (ISO 28722:2008)
L'ISO 28722:2008 spécifie les exigences des couches d'émail appliquées sur des panneaux d'acier de faible ou forte épaisseur, plans, laminés à froid et destinés à l'architecture d'intérieur et d'extérieur.
Elle comprend les caractéristiques fonctionnelles et esthétiques ainsi que la résistance aux graffiti de ces panneaux et de leurs revêtements.
Steklasti in porcelanski emajli - Lastnosti emajlnih prevlek na jeklenih ploščah v arhitekturi (ISO 28722:2008)
Ta mednarodni standard določa zahteve za emajlirane, ravne, hladno valjane, debele in tanke jeklene plošče za notranjo in zunanjo uporabo v arhitekturi. Vključuje funkcionalne in estetske značilnosti, antigrafitne premaze teh plošč in sorodne premaze.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 28722:2012
01-januar-2012
1DGRPHãþD
SIST EN 14431:2004
6WHNODVWLLQSRUFHODQVNLHPDMOL/DVWQRVWLHPDMOQLKSUHYOHNQDMHNOHQLKSORãþDKY
DUKLWHNWXUL ,62
Vitreous and porcelain enamels - Characteristics of enamel coatings applied to steel
panels intended for architecture (ISO 28722:2008)
Emails und Emaillierungen - Merkmale von Emailschichten auf Architektur-
Stahlpaneelen (ISO 28722:2008)
Émaux vitrifiés - Caractéristiques des couches d'émail appliquées sur les panneaux
d'acier destinés à l'architecture (ISO 28722:2008)
Ta slovenski standard je istoveten z: EN ISO 28722:2011
ICS:
25.220.50 Emajlne prevleke Enamels
SIST EN ISO 28722:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 28722:2012
---------------------- Page: 2 ----------------------
SIST EN ISO 28722:2012
EUROPEAN STANDARD
EN ISO 28722
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2011
ICS 25.220.50 Supersedes EN 14431:2004
English Version
Vitreous and porcelain enamels - Characteristics of enamel
coatings applied to steel panels intended for architecture (ISO
28722:2008)
Émaux vitrifiés - Caractéristiques des couches d'émail Emails und Emaillierungen - Merkmale von Emailschichten
appliquées sur les panneaux d'acier destinés à auf Architektur-Stahlpaneelen (ISO 28722:2008)
l'architecture (ISO 28722:2008)
This European Standard was approved by CEN on 3 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 28722:2011: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 28722:2012
EN ISO 28722:2011 (E)
Contents Page
Foreword .3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 28722:2012
EN ISO 28722:2011 (E)
Foreword
The text of ISO 28722:2008 has been prepared by Technical Committee ISO/TC 107 “Metallic and other
inorganic coatings” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 28722:2011 by Technical Committee CEN/TC 262 “Metallic and other inorganic coatings” the
secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2011, and conflicting national standards shall be
withdrawn at the latest by September 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 14431:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 28722:2008 has been approved by CEN as a EN ISO 28722:2011 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 28722:2012
---------------------- Page: 6 ----------------------
SIST EN ISO 28722:2012
INTERNATIONAL ISO
STANDARD 28722
First edition
2008-10-15
Vitreous and porcelain enamels —
Characteristics of enamel coatings
applied to steel panels intended for
architecture
Émaux vitrifiés — Caractéristiques des couches d'émail appliquées sur
les panneaux d'acier destinés à l'architecture
Reference number
ISO 28722:2008(E)
©
ISO 2008
---------------------- Page: 7 ----------------------
SIST EN ISO 28722:2012
ISO 28722:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
COPYRIGHT PROTECTED DOCUMENT
© ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 28722:2012
ISO 28722:2008(E)
Contents Page
Foreword .iv
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Requirements for heavy and light gauge steel enamelled panels .2
4.1 Steel.2
4.2 Application of coating.2
4.3 Final thickness of fired enamel.2
5 Functional characteristics of enamel coating .3
5.1 Adherence test.3
5.2 Porosity test.3
5.3 Abrasion resistance.3
5.4 Impact resistance.4
5.5 Surface hardness (Mohs).4
5.6 Scratch resistance.4
5.7 Flatness.4
5.8 Acid resistance.4
6 Aesthetic characteristics of enamel coating .4
6.1 Surface appearance.4
6.2 Gloss.4
6.3 Colour.5
7 Resistance to graffiti .5
© ISO 2008 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 28722:2012
ISO 28722:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.